01 Intended use
Washing and periodic care of hard surfaces
Jinjie commercial cleaning equipment
Jinjie CD17P Orbital Floor Care Machine
This machine is more suitable for periodic cleaning and maintenance of hard surfaces, compatible with offset operation and applicable brush disks; mid-term maintenance for carpets requires additional confirmation of foam configuration, which is not equivalent to having built-in suction.
02 Key performance figures
orbital action mode compatible with the corresponding brush disk and consumables
03 Working configuration
Floor surface, process, and accessories compatibility, check the power and accessories according to the machine's version.
First locate the nearby hard floor cleaning and periodic care task
01 Hotel hard surface maintenance
Floor surfaces, surface coatings, and processes.
02 Office Floor Care
orbital action compatible with the brush disk
03 commercial public area cycle cleaning
Wastewater post-treatment and personnel isolation
04 carpet middle protection for foam box installation
Foam attachment, carpet, and chemical compatibility.
CD17P: First clarify the task, then match the equipment
The task and the equipment are mixed together.
Washing and periodic care of hard surfaces requires separate clarification of objects and work processes, cannot be directly applied from similar equipment.
Overlooking site requirements
orbital action mode compatible with the corresponding brush disk and consumables; the compatibility of the floor surface, process, and accessories with on-site resources and personnel arrangements also affects usage.
Cleaning and cleanup are not synchronized.
First, check the floor material and process together with the wastewater treatment and final inspection to avoid only completing the intermediate steps.
Will CD17P suit your site?
Caring for hard floors in hotels
Floor surfaces, surface coatings, and processes.
Office floor care
orbital action compatible with the brush disk
Periodic cleaning of public areas in commercial settings
Wastewater post-treatment and personnel isolation
Interim carpet cleaning with a foam generator
Foam attachment, carpet, and chemical compatibility.
| Field or task | Conditions that require verification | Selection check |
|---|---|---|
| Caring for hard floors in hotels | Floor surfaces, surface coatings, and processes. | First confirm the floor material, surface coating, and process, then determine if the hotel hard floor maintenance is suitable. |
| Office floor care | orbital action compatible with the brush disk | With the premise of eccentric operation and brush matching, check the tools, operating methods, and risk boundaries. |
| Periodic cleaning of public areas in commercial settings | Wastewater post-treatment and personnel isolation | Include the post-treatment of contaminated liquid and personnel isolation in the on-site plan, not just compare individual specifications. |
| Interim carpet cleaning with a foam generator | Foam attachment, carpet, and chemical compatibility. | Coordinate the end of work and handover with the foam attachment, carpet, and chemical compatibility. In complex situations, test the machine first or verify on-site. |
The task is to clean the floor using a floor scrubber, with the area to be cleaned being the entire floor surface. The equipment includes a floor scrubber, a squeegee, a dust mop, a filter, a hopper, a pipe jetter, and a hose. The handover includes the equipment, the filter element, the clear width, and the maintenance of the filter.
Do not write 'wet and dry cleaning' if there is no evidence of suction and cleaning; for carpet maintenance, the 'bubble configuration' must be matched, and brushing cannot be equated with wastewater recovery.
Planning different jobs with CD17P
The scenario is for illustrating the applicable conditions and is not a case of a completed customer or actual test results.
Hotel / restaurant carpet care
For interim care of compatible guest-room/restaurant carpets; use suitable extraction equipment for deep cleaning.
View the corresponding scene description →
Interim carpet maintenance
Assess foam-tank interim care for frequently used office/campus carpets, scheduled around occupancy.
View the corresponding scene description →
Office / campus perimeter hard-floor cleaning
For compatible office/campus perimeter and shared-aisle hard-floor care.
View the corresponding scene description →Technical specifications
The first screen is for positioning; the complete specifications should be verified against the original data of the machine and the corresponding delivery version.
Full specifications for View
| Configuration item | Original page registration content |
|---|---|
| Equipment category | Jinjie CD17P Orbital Floor Care Machine |
| Product model | CD17P |
| Rotation speed | 160rpm |
| Operating voltage | 220V / 50Hz |
| Body weight | 40kg |
| Cord length | 12m |
Components and their functions
Overall appearance of the machine and function explanation; 01-06 are explanatory indexes, and are not marked for unverified internal coordinates.
01 machine body and control
First familiarize with the start-stop and operation methods, and arrange the route based on the ground conditions.
02 eccentric operation
Match the eccentric operation mode of this machine with the process, without inferring efficiency from the structural name.
03 pad driver
Select accessories based on the floor surface and cleaning, waxing, or maintenance tasks.
04 Maintenance Consumables
Pads, brushes, and chemicals are mutually compatible; start with small-scale testing first.
05 Optional foam application
In the carpet, the bubble configuration and consumables must be verified and are not considered default accessories.
06 Wastewater and Maintenance
After cleaning, the equipment shall be scheduled for recovery separately, and after shutdown and power disconnection, the attachments shall be inspected.
Hard floor cleaning and periodic care process for CD17P
The work process is used to explain the process and personnel coordination, and does not replace the machine operation instructions and internal structure documents.
01 verify floor surface and process
Floor materials, surface coatings, and construction techniques, and carry out the work according to the machine instructions and on-site conditions.
02 pairing brush disk consumables and a test clean
Match the pad or brush to the orbital action. Follow the model instructions and check suitability on the actual floor.
03 zone care and isolation
Wastewater post-treatment and personnel isolation, and executed according to the machine instructions and on-site conditions
04 wastewater treatment and final inspection
Foam attachments, carpets, and chemicals are compatible. They should be used in accordance with the machine's instructions and on-site conditions.
Floor surface, process, and accessories compatibility, why does it affect the selection?
Floor surface, process, and accessories compatibility
orbital action mode compatible with the corresponding brush disk and consumables; the compatibility of the floor surface, surface coating, and process with foam accessories, carpet, and chemicals should be judged together.
Operating limits
Do not write 'wet and dry cleaning' if there is no evidence of suction and cleaning; for carpet maintenance, the 'bubble configuration' must be matched, and brushing cannot be equated with wastewater recovery.
Appendix and delivery version
Check against the actual attachments, interfaces, materials, or control requirements of the machine, and do not list optional components as standard configurations.
Compare equipment for washing hard floors and carrying out periodic floor care.
This model is centered. Left and right are real configurations or process references; different tasks are not simply high or low settings, and cannot be judged solely by the model number.
| Comparison criteria |  CD17D | CD17P |  HD18 |
|---|---|---|---|
| Main tasks | Washing and basic care of hard surfaces | Washing and periodic care of hard surfaces | Adaptation for stone polishing and maintenance. |
| Configuration function. | The main unit is matched with the brush disk, needle seat, and cleaning consumables according to the process. | orbital action mode compatible with the corresponding brush disk and consumables | Around stone surface matching crystal care process |
| Selection focus | Multi-process accessories and sludge post-treatment. | Floor surface, process, and accessories compatibility | Stone condition and consumable compatibility |
| Power supply | 220V / 50Hz | Verify the configuration of this model independently | 220V / 50Hz |
| Work components. | 430mm | Verify the configuration of this model independently | 18 in |
Verify the use and deployment of CD17P according to the complete process.
Equipment and accessories
The main unit, actual attachments, tools, or consumables are compared according to the same list; optional accessories are not considered as standard fittings.
On-site use
Include the operation of hard surface cleaning with a brush, the cycle care operations, turning the machine, and the preparation related to the floor surface, process, and attachments into the preparation, without using nominal numbers to estimate actual efficiency.
Maintenance and end-of-shift checks
Record the handling of wastewater, final inspection, consumable maintenance, and disposal arrangements together, without setting a fixed cost-saving ratio or payback period.
What should we check daily on CD17P?
Body and control
First familiarize with the start-stop and operation methods, and arrange the route based on the ground conditions. Specific disassembly, maintenance cycles, and accompanying materials should be verified according to the machine's specifications.
Unbalanced operation.
Match the eccentric operation mode of this machine with the process, and do not infer efficiency from the structural name. Specifically, check the disassembly and maintenance cycles as well as the accompanying materials according to the instructions of this machine.
Brush roll pad driver
Select accessories based on the floor surface and cleaning, waxing, or maintenance tasks. Specific disassembly, maintenance cycles, and accompanying materials should be checked according to the machine's instructions.
Cleaning consumables
Pads, brushes, and chemicals are mutually compatible; start with small-scale testing first. Specific disassembly, maintenance cycles, and compatible materials are verified according to this machine's instructions.
Optional foam.
In the carpet, the foam configuration and consumables must be verified and are not considered default accessories. Specific disassembly, maintenance cycles, and accompanying materials should be verified according to the machine's instructions.
Waste liquid and maintenance.
After cleaning, the machine should be scheduled for recovery separately, and after shutdown and power disconnection, the attachments should be checked. Specifically, the disassembly, maintenance schedule, and accompanying materials should be verified according to the machine's manual.
Arrange service around this machine and your actual task
Delivery inspection
Verify the model number, nameplate, random accessories, and delivery documents.
Operator training
Understand verification of floor surfaces and processes and safety start/stop procedures as specified in the machine's manual.
Usage guidance
Integrate hard floor cleaning and periodic maintenance with on-site process communication based on usage conditions.
Parts supply
Check the parts according to the interface, material, and delivery version.
On-site fault repair
Please provide the fault symptoms and inspection records; service scope and schedule are according to the agreement.
Scheduled on-site maintenance
Inspection content, service location, cost, and cycle are subject to actual agreement.
About CD17P, you may also want to know
Which jobs suit CD17P?
This machine is more suitable for periodic cleaning and maintenance of hard surfaces, compatible with offset operation and applicable brush disks; mid-term maintenance for carpets requires additional confirmation of foam configuration, which is not equivalent to having built-in suction.
Why should floor surface, process, and accessory compatibility be given special attention?
orbital action mode compatible with the corresponding brush disk and consumables; the compatibility of the floor surface, surface coating, and process with foam accessories, carpet, and chemicals should be checked together.
Which usage methods cannot be directly adopted?
Do not write 'wet and dry cleaning' if there is no evidence of suction and cleaning; for carpet maintenance, the 'bubble configuration' must be matched, and brushing cannot be equated with wastewater recovery.
What is the main comparison with CD17D?
The reference model focuses on hard floor cleaning and basic maintenance, while this model emphasizes hard floor cleaning and periodic maintenance. First, separate the processes and accompanying equipment, then compare the corresponding original specifications, without judging based on model numbers.
What conditions need to be prepared on-site?
Check the floor material, surface coating, and process compatibility with eccentric operation and brush disk matching, post-wash liquid treatment, personnel isolation, foam attachments, carpet compatibility with chemicals, and complex conditions by combining small-scale tests and on-site evaluation.
How to schedule work and conclude the task?
Organize the tasks according to "Check the floor materials and process → Match the brush disk consumables and trial work → Zone care and isolation → Wastewater treatment and final inspection". The specific operations are decided by the site and the machine instructions together.
Which parts should be inspected during maintenance?
First, focus on the body and control, pad driver, and the cleaning and maintenance of the liquid. Before servicing or disassembly, isolate the power as directed in the manual. Use the service interval specified for the model.
What information is more helpful to provide during consultation?
Provide photos of the hotel hard surface maintenance area, explaining the task, existing equipment and floor materials, the process, and the specific conditions of the accessories, and then determine whether this machine is suitable.
Product enquiry
Judge whether the CD17P is suitable.
Please describe your hard floor cleaning and periodic maintenance tasks, and supplement the floor material, surface coating, and process with bubble attachments, carpets, and chemical compatibility. We will compare the on-site solution with the configuration of this machine.
Phone consultation: 0755-25621811