01 Intended use
Compact area division dry dust maintenance
Jinjie commercial cleaning equipment
Jinjie J-101 Compact Four-wheel Ride-on Dust-Mopping Vehicle
This machine is more suitable for partitioned dry dust brushing on flat, dry hard floors, with a four-wheel layout organizing daily routes; when verifying doorways and corners, the extension of the dust mop head should be included together.
02 Key performance figures
Four-wheel layout combined with front and rear dust brushes to organize partitioned routes
03 Working configuration
dust mop outline and indoor passage, power and attachments should be verified according to this machine's version.
First find the compact zone dry dust maintenance task indoors near you
01 mall hard floor dry dusting
Floor dry, level, and free of loose objects.
02 Hotel public area routes
Whole machine and dust mop extension range
03 Office building public corridor
Corners, doorways, and peak traffic times
04 smooth maintenance of hard floors in indoor areas
dust mop consumables and filter collection
J-101: First clarify the task, then match the equipment.
The task and the equipment are mixed together.
Compact area division dry dust maintenance requires separate clarification of objects and work procedures and cannot be directly applied from similar equipment.
Overlooking site requirements
Four-wheel layout combined with front and rear dust brushes to organize partitioned routes; the outline of the dust mop also affects usage similarly to indoor passage and on-site resources and personnel arrangements.
Cleaning and cleanup are not synchronized.
First, confirm that the floor is dry and remove large items before cleaning the dust mop and storing it together, and arrange this to avoid only completing the intermediate steps.
Will J-101 suit your site?
Hard floor dry dusting in a mall.
Floor dry, level, and free of loose objects.
Hotel public area route.
Whole machine and dust mop extension range
Office public passages
Corners, doorways, and peak traffic times
Maintenance of flat indoor hard floors
dust mop consumables and filter collection
| Field or task | Conditions that require verification | Selection check |
|---|---|---|
| Hard floor dry dusting in a mall. | Floor dry, level, and free of loose objects. | First, confirm that the floor is dry, level, and free of loose debris, then determine if the hard floor is suitable for dry dusting in the mall. |
| Hotel public area route. | Whole machine and dust mop extension range | Check the tools, work methods, and risk boundaries based on the overall machine and the extension range of the dust mop head. |
| Office public passages | Corners, doorways, and peak traffic times | Incorporate corners, doorways, and peak traffic times into the on-site plan, rather than just comparing individual specifications. |
| Maintenance of flat indoor hard floors | dust mop consumables and filter collection | Combine dust mop consumables with filter cleaning storage arrangement for closing and handover, and test or on-site verification for complex conditions. |
The task is to clean the floor using a floor scrubber, with the area to be cleaned being the entire floor surface. The equipment includes a floor scrubber, a squeegee, a dust mop, a filter, a hopper, a pipe jetter, and a hose. The handover includes the equipment, the filter element, the clear width, and the maintenance of the filter.
dust mop is suitable for flat, dry hard surfaces, does not replace brushing, water extraction, or large particle cleaning; turning should be verified for overall sweeping range.
Planning different jobs with J-101
The scenario is for illustrating the applicable conditions and is not a case of a completed customer or actual test results.
Pre-opening retail-aisle dust mopping
Remove bulky debris before opening, then maintain main aisles and corners in sections. Keep the route separate from customers and clean loaded mop heads promptly.
View the corresponding scene description →
Dust maintenance on separated warehouse aisles
Separate the dust-maintenance route from forklifts and loading. Check rack-aisle and turning clearance; handle permitted ordinary dry dust rather than bulky waste.
View the corresponding scene description →
Dust mopping in shared-building lobbies and corridors
Schedule routine lobby and corridor rounds during quiet periods. Check turns, entrances and edges first, and finish inaccessible corners with suitable tools.
View the corresponding scene description →Technical specifications
The first screen is for positioning; the complete specifications should be verified against the original data of the machine and the corresponding delivery version.
Full specifications for View
| Configuration item | Original page registration content |
|---|---|
| Cleaning width | 600mm |
| Wheel layout and size class | Four-wheel / compact |
| Seat | Adjustable |
| Nominal range | 30km |
| Nominal operating time | 3–4h |
| Motor output | 180–220W |
| Nominal cleaning efficiency | 4800㎡/h |
| Battery capacity | 20Ah |
| Brake system | Electromagnetic brake |
| Rated carried load | 100kg |
| Vehicle weight | 46kg |
Components and their functions
Overall appearance of the machine and function explanation; 01-06 are explanatory indexes, and are not marked for unverified internal coordinates.
01 Driving and Body
Organize internal routes according to the machine's overall outline, floor conditions, and driving requirements.
02 Front dust mop
Include the extension of the front component into the door, corners, and personnel clearance.
03 Rear dust mop
Check the rear sweep and consumables status, not just the vehicle width.
04 Connection and Fixing
Check the connection arm, fixed or clamping plate according to the machine version.
05 dust mop Consumables
Adjust according to size and match with fixed and floor material, and promptly clean the attached substances.
06 Operation and Maintenance
Check the electrical, start-stop, and wheel group according to the instructions, and maintain consumables after shutdown.
Interior compact zone dry dust maintenance process of J-101
The work process is used to explain the process and personnel coordination, and does not replace the machine operation instructions and internal structure documents.
01 confirm dry floor and large item removal
Ensure the floor is dry, level, and free of loose debris, and follow the instructions of this machine and the on-site conditions.
02 verify consumables and overall outline
Whole machine and dust mop extension range, and executed according to the machine's instructions and on-site conditions.
03 isolated zone dust mop operation
Turn corners, at doorways, and during peak pedestrian times, and execute according to the machine's instructions and on-site conditions.
04 Stop the machine, clean the dust mop, and store it.
dust mop consumables and filter collection, and execute according to this machine's instructions and on-site conditions.
dust mop outline and indoor passage, why does it affect selection?
dust mop outline and indoor passage
Four-wheel layout combined with front and rear dust brushes to organize partitioned routes; the ground dryness, flatness, and scattered debris, along with dust mop consumables and filter cleaning storage, should be considered together.
Operating limits
dust mop is suitable for flat, dry hard surfaces, does not replace brushing, water extraction, or large particle cleaning; turning should be verified for overall sweeping range.
Appendix and delivery version
Check against the actual attachments, interfaces, materials, or control requirements of the machine, and do not list optional components as standard configurations.
Compare equipment for dry-dust removal in small indoor zones.
This model is centered. Left and right are real configurations or process references; different tasks are not simply high or low settings, and cannot be judged solely by the model number.
| Comparison criteria |  J-380 | J-101 |  J-390 |
|---|---|---|---|
| Main tasks | Dry dust maintenance on open routes indoors | Compact area division dry dust maintenance | Maintenance of hard floor surfaces with pressure boards using dust mop |
| Configuration function. | The three-wheel chassis carries front and rear dust mops. | Four-wheel layout combined with front and rear dust brushes to organize partitioned routes | The front and rear lower metal plates are matched with the corresponding dust mop consumables. |
| Selection focus | Corner and dust mop sweeping range. | dust mop outline and indoor passage | Connection arm, clamping plate, and consumables compatibility |
| Work components. | 900mm | 600mm | 900mm |
Verify the use of J-101 according to the complete process
Equipment and accessories
The main unit, actual attachments, tools, or consumables are compared according to the same list; optional accessories are not considered as standard fittings.
On-site use
Include the operation, transition, and outline of the dust mop in the compact indoor zone for dry dust maintenance, as well as the preparation related to indoor passage, without using nominal numbers to indicate actual efficiency.
Maintenance and end-of-shift checks
Record the shutdown cleaning and storage of the dust mop, as well as the maintenance and disposal arrangements for consumables, without specifying a fixed cost-saving ratio or payback period.
What should we check daily on J-101?
Driving and vehicle body
Organize internal routes according to the machine's overall outline, floor conditions, and driving requirements. Specifically, check the disassembly and maintenance schedule, as well as the accompanying materials, according to the machine's manual.
Front dust mop
Include the extension of the front component into the door, corners, and personnel clearance. Specifically, disassembly, maintenance cycles, and accompanying materials should be checked according to the machine's instructions.
Rear dust mop
Check the rear sweep and consumables status, not just the vehicle width. Specifically, disassembly and maintenance cycles, as well as compatible materials, should be verified according to the machine's manual.
Connection and fixation
Check the connection arm, fixed or clamping plate according to the machine version. Specific disassembly, maintenance cycles and matching materials should be checked according to the machine instructions.
dust mop consumables
According to size, fixed and floor material compatibility, promptly clean the attached substances. Specifically, disassembly, maintenance cycles, and accompanying materials should be checked against the machine's instructions.
Control and maintenance
Check the electrical, start-stop, and wheel group according to the instructions, and maintain consumables after shutdown. Specifically, the disassembly, maintenance cycle, and accompanying materials should be verified according to the machine's instructions.
Arrange service around this machine and your actual task
Delivery inspection
Verify the model number, nameplate, random accessories, and delivery documents.
Operator training
Follow the machine instructions to confirm that the floor is dry and that large items are removed before starting and stopping the machine safely.
Usage guidance
Combine indoor compact zone dry dust maintenance with on-site process communication under usage conditions.
Parts supply
Check the parts according to the interface, material, and delivery version.
On-site fault repair
Please provide the fault symptoms and inspection records; service scope and schedule are according to the agreement.
Scheduled on-site maintenance
Inspection content, service location, cost, and cycle are subject to actual agreement.
You may also be interested in J-101
Which jobs suit J-101?
This machine is more suitable for partitioned dry dust brushing on flat, dry hard floors, with a four-wheel layout organizing daily routes; when verifying doorways and corners, the extension of the dust mop head should be included together.
Why should dust mop outline and indoor passage be given special attention?
Four-wheel layout combined with front and rear dust brushes to organize partitioned routes; the ground dryness, flatness, and scattered debris, along with dust mop consumables and filter cleaning storage, should be checked together.
Which usage methods cannot be directly adopted?
dust mop is suitable for flat, dry hard surfaces, does not replace brushing, water extraction, or large particle cleaning; turning should be verified for overall sweeping range.
What are the main differences compared to J-380?
The comparison machine handles dry dust on open indoor routes. This model serves smaller indoor zones. Compare the working method, accessories and specifications against the route.
What conditions need to be prepared on-site?
Check the floor for dryness, flatness, and scattered debris; inspect the entire machine and the extension range of the dust mop head, corners, doorways, and peak traffic times; check the dust mop consumables and filter cleaning storage. In complex conditions, combine small-area testing with on-site evaluation.
How to schedule work and conclude the task?
Organize the task according to "Confirm dry ground and remove large items → Check consumables and overall outline → Isolate and drive the dust mop in a designated area → Stop the machine, clean the dust mop, and store it". The specific operations are determined jointly by the site and the machine.
Which parts should be inspected during maintenance?
Prioritize attention to driving and vehicle body, rear dust mop, and operation and maintenance. Before servicing or disassembly, isolate the power as directed in the manual. Use the service interval specified for the model.
What information is more helpful to provide during consultation?
Provide photos of the mall's hard surface dusting areas, explaining the task, existing equipment, and the dimensions of the dust mop relative to indoor traffic conditions, and then determine whether this machine is suitable.
Product enquiry
Judge together whether J-101 is suitable
Please describe your compact partitioned dry dust maintenance tasks for indoor areas, including dry floor, flatness, and scattered debris, as well as dust mop consumables and dust cleaning storage. We will compare the on-site solution together with the configuration of this machine.
Phone consultation: 0755-25621811