01 Intended use
- Continuous sweeping routes on industrial estates
- Plan each round around local debris levels, supply points, unloading and parking.
Jinjie road sweepers
Jinjie J-XS1550 Ride-On Sweeper
The Jinjie J-XS1550 ride-on sweeper combines 1550 mm coverage, an 80 L hopper and a 45 L tank for segmented property, campus-connection and factory-perimeter routes.
1550 mm coverage for regular mechanical sweeping along longer roads.
Theoretical calculation speed:12 km/hTheoretical sweeping coverage (calculated):18600㎡/hWebsite theoretical comparison calculation; not actual productivity.
02 Key performance figures
- 1550 mm sweeping coverage
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls and 80 L hopper
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Typical applications
3 sweeping applications for J-XS1550
Larger estate roads
View detailed analysis →Regular sweeping of longer estate roads
For longer routes with scattered ordinary debris, 1550 mm coverage supports organized mechanical route sweeping.
Factory yards
View detailed analysis →Ordinary dry-debris collection around factories
Factory yards commonly contain leaves, grit, paper and packaging fragments. Check road width, mixed vehicle traffic and emptying points.
Property plazas
View detailed analysis →Scheduled sweeping of stable plaza routes
On stable plaza and perimeter-road routes, ride-on sweeping can reduce long manual return trips.
Cleaning challenges
Common challenges in regular route sweeping
Route length, coverage, debris collection and access jointly affect routine sweeping.
Long routes in larger estates, factory yards and plazas can occupy considerable time when swept manually.
Leaves, paper, grit and ordinary dust across different road sections require regular route collection.
Unconfirmed hopper, water tank and enclosed-cab details cannot be treated as confirmed selling points.
Site conditions, configuration and selection
How would J-XS1550 work on your site?
Assess longer routes with scattered debris. Check the listed 1400 × 1250 × 1350 mm machine at gates and turns and plan shifts with the 48 V 53 Ah configuration. Add disposal stops for concentrated leaves or grit and compare larger-hopper models where needed.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-XS1550 |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-XS1550 with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Effective sweeping width1550mm
Sweeping width1550 mm: regular sweeping of longer roads; confirm narrowest access and turning space on site.
hopper capacity80L
Battery configuration48V53Ah
Operating voltage48V DC
Theoretical sweeping coverage (calculated)18600㎡/h
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Effective sweeping width | 1550mm | Theoretical calculation speed | 12 km/h |
| Theoretical sweeping coverage (calculated) | 18600㎡/h | Sweeping width | 1550 mm: regular sweeping of longer roads; confirm narrowest access and turning space on site. |
| Main brush length | 490mm | Main brush diameter | 300mm |
| Side brush diameter | 450mm | Emptying arrangements | Do not specify litres before hopper capacity is confirmed; first assess shifts by debris volume, density and distance to emptying points. |
| hopper capacity | 80L | Water tank capacity | 45L |
| Driving arrangement | Ride-on operation reduces long walking routes but still requires an operator, observation and maintenance. | Maximum travel speed | 12km/h |
| Road conditions | Check road width, turns, gradients, mixed traffic, parking and work windows. | Work organization | Check daily area, debris types, emptying points, dust levels and operator-protection needs. |
| Drive and electrical system | |||
| Power configuration | Confirm the battery, tank and operator configuration individually against the model specification and delivery list. | Battery configuration | 48V53Ah |
| Operating voltage | 48V DC | Drive power | 800W |
| Main brush power | 850W | Vacuum motor power | 180W |
| Machine configuration | |||
| Machine dimensions | 1400×1250×1350mm | Machine weight | 350kg |
How do these figures apply to your site?
Calculated as effective sweeping width × the website's standard theoretical speed of 12 km/h. Maximum travel speed remains a separate specification and is not used in this formula. The result is not actual or measured productivity.
Assess how coverage, collection, driving arrangements, dust control, emptying points and access affect actual work, rather than comparing numbers alone.
Components and their functions
Suitable debris
Leaves, paper, grit and ordinary particles; wet sticky waste, bulky items and entangling material require a different assessment.
Structure and functions
How the systems on J-XS1550 work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check clearances and turning room along the full estate route.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-XS1550 gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-XS1550?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-XS1550 suit the site, and when is another option appropriate?
Where J-XS1550 fits best
- Larger estate roads
- Routine factory-yard sweeping
- Stable property-plaza routes
- Mechanical sweeping of ordinary dry debris
- Longer routes not requiring a fully enclosed cab
Compare other models
- Projects requiring confirmed hopper, tank and cab details
- Narrow roads, frequent turns or many obstacles
- Wet sticky waste, oily sludge or scrubbing and water-recovery duties
- Compare enclosed-cab models when prolonged outdoor operator protection is required
Comparing related models
How does J-XS1550 compare with similar models?
To compare machines, consider road layout, debris load and turning room alongside sweeping width.
| Comparison criteria | Narrower-coverage option J-XS1500 → | Current modelJ-XS1550 → | Wider-coverage option J-XS1800 → |
|---|---|---|---|
| Sweeping width | 1500mm | 1550mm | 1880mm |
| Hopper | 180L | 80L | 180L |
| Water tank | 80L | 45L | Ask about this option when specifying the machine. |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-XS1550?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-XS1550
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-XS1550 ride-on sweeper: selection and operating questions
Which road routes suit J-XS1550?
Assess daily loose debris on property roads, campus connections and factory perimeters. Use 1550 mm coverage for passes and check narrow sections, turns and people or vehicles.
How should the 80 L hopper serve long routes?
Segment routes by debris concentration and provide safe disposal. Paper, concentrated leaves and heavy grit load differently; trial them to establish stops and disposal travel.
How does the 45 L tank fit dust management?
Use the specified suppression system alongside filters, sealing and cleaning. Plan dust and water access together and observe collection as well as airborne dust.
What matters during edge sweeping?
Coordinate side-brush gathering with main-brush collection and maintain clearance. Assess tree pits, column backs and tight corners and plan manual finishing rather than repeatedly forcing close passes.
How should 48 V 53 Ah inform shifts?
Check battery, charger and safe parking, then record sweeping, water, disposal and waiting. Plan charging and handover from a route trial rather than capacity alone.
How should consumables be maintained and selected?
Inspect brush wear and entanglement after shutdown and service filters as instructed. Provide model, dimensions and interfaces for replacements and retain consumable records.
How does it compare with J-XS1500 and J-XS1800?
Coverage is 1550, 1500 and 1880 mm, with hoppers of 80, 180 and 180 L. Compare collection volume, open-road coverage, connection access, power and maintenance together.
How can Wanshenglong assess suitability?
Share road dimensions, waste samples, disposal and shifts to discuss trials and configuration. Confirm power, brushes, filters, operation and care against the intended route at handover.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-XS1550.
Phone consultation: 0755-25621811
Product enquiry
Describe the route to assess J-XS1550
Provide road width, route length, debris types, emptying points, dust levels and daily work windows.