This machine is more suitable for frequent pipe jetting in outdoor environments, with gasoline power facilitating easy movement between points. 304 Stainless steel hose reel design is compatible with repeated hose advancement and retraction as well as final tidying requirements.
Suitable for frequent back-and-forth hose feeding and flushing maintenance outdoors, with gasoline power for easy relocation; 304 stainless steel hose reel design is the key difference between this machine and the conventional coiled hose version.
Maximum 20 MPa combined with 50 L/min water flow, focusing on both scrubbing and flushing tasks; continuous water supply and downstream discharge must be coordinated.
The listed configuration includes a GX690 petrol engine, an AR pump and a 304 stainless-steel hose reel. Confirm the engine and accessories against the specification for the unit to be delivered.
The video uses J-2050H markings and historical power descriptions. Confirm current J-2050HS configuration from this page's parameters and delivery documents.
Provide cleaning tasks, site conditions and frequency to confirm suitable configuration.
Enquire about this modelAround 50 L/min and 304 stainless steel hose reel design, balance the impact and frequent cleaning tasks. First, find the closest task, then judge based on the site conditions.
Number of feed and retraction pipe times, well distance, and waste collection
Check together the on-site conditions →02Pipe material, working hose, and fitting.
Check together the on-site conditions →03Open environment, fuel, and water supply.
Check together the on-site conditions →04Hose reel design, operation and supplied equipment
Check together the on-site conditions →When choosing J-2050HS, consider the actual pipeline and the following issues together to avoid comparing only one parameter.
Record the status of the hose, fittings, and working hose to determine whether the structure is suitable for the shift.
Check the water source, pipeline, and nozzle; the hose reel design should be checked for organization, environment, and maintenance requirements.
You cannot use the information from the H version engine, panel, or roll tube based on the similarity of the name.
50 L/min with 304 stainless steel hose reel design, balancing jetting and high-frequency cleaning tasks. Specific configuration still needs to Be combined with this machine's documentation, pipeline conditions, and trial operation confirmation.
Number of feed and retraction pipe times, well distance, and waste collection
Pipe material, working hose, and fitting.
Open environment, fuel, and water supply.
Hose reel design, operation and supplied equipment
| Field or task | Configuration and conditions of interest | J-2050HS Selection Judgment |
|---|---|---|
| High-frequency pipeline maintenance. | Number of feed and retraction pipe times, well distance, and waste collection | Connect the functions of flushing, sorting, and disposal into a complete task, then compare with the current configuration. |
| Wet outdoor point. | Pipe material, working hose, and fitting. | The stainless steel structure still requires daily cleaning and inspection; the material cannot be considered as maintenance-free. |
| Dispersed engineering maintenance points | Open environment, fuel, and water supply. | The gasoline-powered model is convenient for field transfers, but tailpipe emissions, continuous water supply, and parking space need to be separately addressed. |
| Comparison between H and HS configurations | Hose reel design, operation and supplied equipment | When pressure water volume is similar, select based on hose retrieval/frequency and actual structural differences, not just the name. |
| Clean pipe diameter and inlet | Clear pipe bore, pipe material, narrowest access point and bends | Provide dimensions or a pipeline diagram to determine whether the nozzle and working pipe can enter, bend, and safely retrieve. |
| Pipe length and segment division. | Two well spacing, elbow count, and available working hose length | Separate the length of the work hose from the actual reachable distance; first evaluate the segment plan for long lines or complex bends. |
Use the existing scenario diagram for this model. Specific configurations and On-site conditions can Be discussed together with photos
Connect the functions of flushing, sorting, and disposal into a complete task, then compare with the current configuration.
Outdoor site arrangement: first confirm fuel, water supply, cleaning materials, and nozzles, and separate pipe tasks from surface rinsing.
Arrange tasks and orders to confirm attachments, nozzles, and compatible operating conditions; do not consider display images as standard or multi-person multi-gun capability.
Pressure indication, overall flow, and power should be compared; working pressure, maximum pressure, and allowable operating conditions also need to be verified against the corresponding technical data.
200bar（20MPa）
50L/min
Petrol power
| Product model | J-2050HS |
|---|---|
| Overall flow rate indication | 50L/min |
| Power type | Petrol power |
| Maximum pressure | 200bar（20MPa） |
| High-pressure pump | Italian AR industrial precision ceramic plunger pump |
| High-pressure hose length | 30 m |
| Maximum inlet water temperature | 60℃ |
| Engine | Honda GX690 twin-cylinder petrol engine |
| Engine horsepower | 24 HP |
| Engine speed | 3600 r/min |
| Fuel tank capacity | 25 L |
| Weight | 126 kg |
| Overall dimensions | 1020 × 820 × 1120 mm |
| Body material | Thickened 304 stainless steel |
| Material of the pipe jetter. | All 304 stainless steel |
| Material | 304 stainless-steel hose reel |
Flow rate is not a guarantee for the diameter or distance of the pipe that can be cleared. Actual progress, flushing, and operation time are also affected by the pipeline, nozzle, water supply, and blockages.
The left figure shows the overall appearance of this model, with six items indicating functional descriptions; do not misrepresent general descriptions as internal structure diagrams.
Park the main unit according to the outdoor point arrangement and move it for transfer, leaving space for the hose entry and exit and on-site passage.
The gasoline-powered model is convenient for moving between locations without fixed power sources; water supply, fuel, and exhaust conditions should be implemented simultaneously.
A machine flow rate of 50 L/min needs a continuous water supply. Check the pump type and allowable operating conditions in the documentation for the machine.
Focus on checking the stainless steel hose reel design, pipeline arrangement, and joints. Power maintenance and pump and valve operations should be carried out according to the specifications of this machine.
Select an appropriate nozzle based on the pipe material, blockage type, and inlet; arrange the advancement, retraction, and direction of the waste together.
304 stainless steel coiling tube tool with high-frequency feed and retrieve hose, material and feeding method are separately confirmed, and automatic feeding is not assumed.
Look at the direction of clean water flow and waste matter, then determine how to coordinate with your pipeline. This is a general jetting process explanation. Specific operations are carried out according to the machine's manual and training.
The gasoline engine drives the pump unit, which pressurizes the incoming water and sends it to the working hose. The main unit is arranged in an open outdoor area, with fuel and continuous water supply prepared.
The water is delivered to the jetting nozzle via the work hose; the length, bend, and connection conditions affect the end conditions, and the hose length is not equal to the effective jetting distance.
Repetitive back-and-forth feeding of the hose should first check the nozzle and pipeline conditions; the hose reel design and engine configuration cannot replace the matching of the working attachment.
Continuous flushing and discharge require synchronized scheduling of water source, downstream discharge, and waste collection, combined with segmented treatment at inspection wells to avoid re-depositing waste downstream.
First, clarify the pipeline and waste, then match the working hose, jetting nozzle, and water supply and drainage. Whether the accessories are standard and their specific specifications are subject to the delivery list of this model.
Maximum 20 MPa pressure combined with 50 L/min water flow, focusing on both scrubbing and flushing tasks; continuous water supply and downstream discharge must be scheduled simultaneously. The pressure and diameter should be based on the machine's specifications, and the maximum pressure should not be considered as the continuous operating pressure.
Pipe diameter limits nozzle size and clearance. Assess pipe length together with bends and access points. The hose length in the machine specification alone does not establish how far a blockage can be cleared.
Distinguish between oil, loose sand, and hard objects blocking; select separately the internal spray nozzles and surface cleaning attachments, and check the hole size, interface, and pressure according to the specifications of this machine.
| What does the customer provide? | What needs to be matched | How to make a selection and judgment? |
|---|---|---|
| Clear pipe diameter, inlet, and elbow | Nozzle outer diameter, working pipe and connection form | Verify whether it can enter, turn, and retrieve, not only comparing the cleaning pressure. |
| Oil, sand, or other blockages | Nozzle spray form, pressure flow and pipe material resistance | First, distinguish between soft, removable debris that can be flushed and hard objects or blockages that require separate handling. |
| Total length of the pipeline and distance between the two wells. | Working hose length, hose winding and segment position. | The length is determined based on the actual delivery, combined with the end conditions, and no fixed effective distance is promised. |
| Pipe jetting or auxiliary surface cleaning. | Specialized pipe jetter nozzle or corresponding cleaning attachment | Two types of tasks should be checked separately against the interface, operating conditions, and delivery list; no conclusion can be drawn from the display images regarding the standard configuration. |
First, check the pipeline task, then compare the power and pressure ratings and water volume. Boundary models use task or power references, which do not necessarily mean the left or right model is smaller or larger.
| Comparison criteria |  J-2050H → | J-2050HS → |  J-1575L → |
|---|---|---|---|
| Pressure indication | 200bar（20MPa） | 200bar（20MPa） | 150bar（15MPa） |
| Overall flow rate indication | 50L/min | 50L/min | 75L/min |
| Power type | Petrol power | Petrol power | Petrol power |
| What is the main focus of this product? | Gasoline-powered outdoor sweepers, 50 L/min discharge and water supply and drainage coordination. | 50 L/min with 304 stainless steel hose reel design, balancing jetting and high-frequency cleaning tasks. | 75 L/min total water supply, prioritize continuous water supply and waste collection when selecting the machine. |
| Power and site arrangement | Open the outdoor area, fueling station, and dispersed points for transfer. | Open the outdoor area, fueling station, and dispersed points for transfer. | Open the outdoor area, fueling station, and dispersed points for transfer. |
| Tube and working attachment attention. | Black roll pipe adapter; compatible with work pipe and nozzle | 304 stainless steel coiling tool; compatible with the working hose and nozzle | Operate the working attachment according to the machine's hose reel design, interface, and task configuration. |
Pressure diameter, flow test conditions, and specific configuration need to be confirmed separately; they should not be based on the highest numerical promise for applicable pipe diameter, distance, or shift output.
Treat high-frequency pipeline maintenance as specific tasks, and statistically count them according to the four stages: preparation, operation, supply, and conclusion.
List the repeated hose feeding and retrieval, on-site cleaning and maintenance records separately, and calculate them together with the flushing and pumping, fuel, and waste disposal.
Record the amount of gasoline, actual water used, wear and tear of the work hose and nozzle, daily maintenance, and waste disposal separately.
Compare the same pipeline, same completion requirements, and same cycle. Procurement costs and depreciation allocation are not added redundantly, and no preset savings ratio or payback period is assumed.
Specific steps, maintenance cycles, and disassembly requirements shall be followed according to the machine's manual and training, and the web is not to be used instead of the maintenance manual.
Number of feed and retraction pipe times, well distance, and waste collection are key points. After task changes, re-evaluate, do not carry over the previous on-site conclusion.
Focus on checking the stainless steel hose reel design, pipeline arrangement, and joints. Power maintenance and pump and valve operations should be carried out according to the specifications of this machine.
Record the type of pipe material, the type of blockage, and the type of nozzle used, and inspect for visible damage; the cleaning method should be carried out according to the machine's instructions.
Check and maintain the machine according to the gasoline power instructions. The maintenance cycle, fuel type, or electrical requirements cannot be applied to similar models.
Follow the machine training to organize the work hose, coil hose, and body, record abnormalities, and do not carry over unresolved faults into the next task.
Retain the model, configuration, operation time, and abnormal phenomena; after following the instructions to stop the machine, contact after-sales service, and do not attempt to disassemble the hose under pressure or modify the protection settings on your own.
Service scope, costs, and on-site arrangements are confirmed based on the actual project and agreement.
Check the equipment, configuration, and random documents together before delivery.
Combine the machine's working pipe, nozzle, and on-site conditions for understanding operations.
Bring the model number, pipeline conditions, and usage issues for communication.
Check the work hose, nozzle, fittings, and consumables against the machine version.
Service scope, costs, and arrival arrangements should be confirmed in advance.
Combine usage frequency, location, and actual agreement arrangements.
Bring in the specific pipeline conditions you are concerned about, and continue to communicate the specific configuration.
Suitable for frequent feeding and retrieving of the hose and jetting and cleaning maintenance in outdoor environments, with gasoline power for easy transfer; 304 stainless steel hose reel design is the key difference between this machine and the conventional coiled hose version. Specific applicability still depends on the pipeline, clogs, and site conditions, and is not guaranteed by the model name.
Maximum 20 MPa combined with 50 L/min water flow, aimed at tasks emphasizing both scrubbing and flushing; continuous water supply and downstream discharge should be arranged simultaneously. The indicated pressure, maximum pressure, and sustainable working conditions should be checked separately, and the pressure value is not required to ensure that all blockages are handled.
Record the entry and exit of each check pit hose, transfer, supply, and transportation separately, combine with changes in blockage materials to arrange maintenance, not use the total water volume of the machine to replace the evaluation of a full shift
Gasoline internal combustion engines are not used in indoor or semi-enclosed spaces; even in open outdoor areas, exhaust, fuel, fire sources, water supply, and drainage must be arranged according to the instructions.
The material, structure, and operating method of the hose must be confirmed separately. The stainless steel hose handler itself does not prove the automatic hose feeding function. Follow the instructions for this machine and the training operations.
This machine and J-1575L deliver different combinations of pressure and flow. Consider the blockage, nozzle, continuous water supply and drainage together. A higher individual figure only favours certain tasks.
Keep the original manual and configuration sheet. Check the water source, working hose, nozzle, fittings, coiled hose, and power status according to the instructions. Do not use cycle, oil type, and disassembly information from other models.
First, follow the machine's instructions to shut down and handle the machine. Record the water supply, nozzle, pipeline, and any abnormal phenomena, then contact after-sales service. Do not disconnect the pipe without pressure, and do not adjust the safety valve setting on your own or force the pipeline to be sent.
First discuss the actual pipeline of high-frequency pipeline maintenance, then organize the number of hose retrieval and retraction, well spacing, and waste collection with daily work schedule together.
Phone consultation:0755-25621811
List the repeated hose feeding and retrieval, on-site cleaning and maintenance records separately, and calculate them together with the flushing, fuel, and waste disposal. Communicate with the site again if needed to understand or arrange a trial run.
