This machine is more suitable for outdoor professional heavy-duty tasks without fixed power supply, with gasoline power convenient for approaching dispersed work points, and trial washing is first conducted based on material and waste type, with isolation arranged.
For outdoor professional heavy-duty cleaning areas, gasoline-powered units are convenient for setting up operations away from fixed power sources. First, confirm that the material is compatible, water supply is available, and safety conditions are met.
Maximum 50 MPa, 15 L/min flow; centralized treatment of heavy soiling points
Engine, pump, piping, and working attachment should be checked separately; gasoline-powered units should be arranged according to outdoor conditions.
Select a similar task, then check the material, dirt, power, and water supply conditions together.
First check the no-water and protection areas, then verify the equipment configuration.
View selection criteria →02First check the material and trial washing, then verify the equipment configuration.
View selection criteria →03First check the work isolation, then verify the equipment configuration.
View selection criteria →04First check the water supply and fuel, then verify the equipment configuration.
View selection criteria →The following is a selection reference, which does not replace original technical data, on-site verification, and trial washing.
Focus on checking the no-water and shielding.
Focus on verifying materials and trial washing.
Focus on checking operational isolation.
Focus on checking water supply and fuel.
| Field or task | Configuration that requires attention | J-5015H Selection Judgment |
|---|---|---|
| Outdoor engineering equipment | No water supply and protection; pressure, flow rate, and working attachment matching. | Test the cleaning with materials, dirt, and site conditions, and do not rely on the maximum pressure promise for cleaning effectiveness. |
| Professional surface cleaning points | Material and test washing; pressure, flow rate, and matching of the working attachment. | Test the cleaning with materials, dirt, and site conditions, and do not rely on the maximum pressure promise for cleaning effectiveness. |
| Vehicle equipment exterior | Job isolation; pressure, flow, and job end matching. | Test the cleaning with materials, dirt, and site conditions, and do not rely on the maximum pressure promise for cleaning effectiveness. |
| Open workbench | Water supply and fuel; pressure, flow rate, and working attachment matching. | Test the cleaning with materials, dirt, and site conditions, and do not rely on the maximum pressure promise for cleaning effectiveness. |
For assessed mud, oil and adherent soil on construction equipment, tracks, chassis and external structures.
For assessed rust deposits, soil and sediment on hulls, dock equipment and large steel exteriors.
For separately assessed exterior oil/deposit cleaning on tanks, boilers, heat-exchange equipment and large vessels; hazardous-area suitability is not established.
Review day-to-day configuration first. Expand the full specifications for more detail.
| Key operating figures | |||
|---|---|---|---|
| Pressure | 500bar（50MPa） | Flow | 15L/min |
| High-pressure pump | Italian AR industrial precision ceramic plunger pump | High-pressure hose length | 15m |
| Maximum inlet water temperature | 60℃ | ||
| Drive and electrical system | |||
| Engine | Honda GX630 twin-cylinder | Engine horsepower | 21HP |
| Engine speed | 3600r/min | Fuel capacity | Gasoline 25 L |
| Machine configuration | |||
| Body material | Thickened 304 stainless steel | Overall weight | 120kg |
| Overall dimensions | 950×820×1030mm | ||
Assess specifications against the site task and conditions, not the figures alone.
Single port quick connect 0°, 15°, 25°, 40°, each 1 pieces; other nozzles are optional, confirmed according to the project and order.
Rotary nozzles, surface cleaners, multi-nozzle flushing bars, specialist jetting nozzles, extra high-pressure hose and other accessories outside the standard package are confirmed for each order.
Do not derive the multi-gun capability based on the overall machine parameters.
First, check the material, dirt type, working attachment, and operating conditions.
The rotating head, floor scrubber, and other accessories should be confirmed according to the list for this model.
Independent pump operating conditions, piping, and flow distribution requirements are needed, and this page does not make any commitment.
For assessed outdoor construction-equipment and heavy-oil surface tasks.
For assessed mobile exterior cleaning at shipyards, ports and large metal facilities.
For assessed longer-route cleaning of bridge decks, railings and municipal outdoor facilities.
For suitable outdoor industrial work without fixed power or with frequent relocation.
Provides high-pressure water for assessed heavy-soil and equipment-surface tasks.
Supports working distance during assessed outdoor cleaning of large equipment, hulls and tank exteriors.
Supports outdoor industrial durability and relocation, subject to the supplied configuration.
First check your power and water supply conditions, then compare the working pressure, flow rate, and attachments to determine which model is more suitable.
| Corresponding projects |  J-3522H → |  J-5015H →Current Model |  J-5022H → |
|---|---|---|---|
| Pressure diameter | Confirm the configuration of this machine separately during selection. | Confirm the configuration of this machine separately during selection. | Confirm the configuration of this machine separately during selection. |
| Flow rate record | Confirm the configuration of this machine separately during selection. | Confirm the configuration of this machine separately during selection. | Confirm the configuration of this machine separately during selection. |
| Power Records | Confirm the configuration of this machine separately during selection. | Confirm the configuration of this machine separately during selection. | Confirm the configuration of this machine separately during selection. |
In accordance with the current records and task conditions for each model, do not take the highest value as the uniform working value. When selecting equipment, confirm the specific configuration and operating conditions together with the data of each machine model.
First, understand the configuration and operational division by examining the overall appearance of the machine; the position and configuration of internal components can be further understood in conjunction with the machine's documentation.
Combine the complete appearance of the entire machine to check the equipment movement route and operational position.
Check the gasoline plan against the engine version, outdoor conditions, and fuel requirements first.
Check the pump type and operating conditions against the model nameplate and manual.
Check the water source, connections, and continuous water supply conditions before work.
Check the delivery hose length, fittings, and pipeline pressure rating separately.
Combine the cleaning material and task to confirm the applicable working attachment configuration.
This is a function flow description and is not intended as the internal water circuit cross-section or component location diagram.
First, check the water source, inlet conditions, and sustainable water supply.
The motor drives the pump operation, and the operating conditions should be checked against the specifications of this machine.
Organized by matching piping and working attachment for flushing, no assumption of valve setting.
Arrange the work method according to the material, isolate splashing and collect the wastewater.
Do not take the maximum value as the continuous operating value, and do not take the theoretical hydraulic power as the rated power.
Working pressure, maximum pressure, and adjustable range are different for different diameters; they should be verified separately based on the original settings of this model and actual operating conditions.
Gasoline internal combustion engines are not used in indoor or semi-enclosed spaces; outside, the machine's instructions still apply to tailpipe emissions, fire sources, and fuel management.
Continuous water supply, pipeline pressure resistance, and nozzle need to be matched; do not derive multi-gun capability or fixed area efficiency based on the entire machine's flow rate.
Through the overall schematic, understand the J-5015H power, pump head, long brush, pressure gauge, and high-pressure hose connections to facilitate communication about the configuration with your tasks.
Inspect the engine, AR ceramic plunger pump, gauge and lance arrangement.
Before purchase, check inlet/outlet, gauge, hose length and site drainage.
Before purchasing parts and consumables, please provide the equipment model, usage scenario, and original parts information for confirmation.
When there are no actual data on human resources, energy, and maintenance, the energy saving ratio is not publicized.
Record the entire machine, the hose attachment, the on-site water system, and the fuel and mobile accessories.
Record the actual time spent by personnel, water, and fuel, taking into account the collection and discharge of waste.
Record piping, nozzle, sealing, and power maintenance according to this model's instructions, without estimating uniformly
When comparing, use the same task, usage duration, and cost range; separate the equipment investment from daily expenses.
Confirm against the project configuration and order. Flushing-nozzle count needs separate checking and does not establish simultaneous multi-lance capability.
The standard high-pressure hose is 10 meters. The original pipe length record of 15 meters is still retained; the actual delivered length and applicable range should be checked according to the project configuration and order separately.
Delivery, use, and maintenance can be communicated in advance; service scope, schedule, and costs are confirmed based on the actual project and agreement.
Verify the model, configuration, random documents, and appearance according to the order.
As per the delivery equipment instructions, introduce the operation, shutdown, and precautions.
Verify the usage method based on the task, water and electricity conditions, and on-site conditions.
Verify applicable accessories based on model, version, and original component specifications
After fault communication, service is arranged according to the actual service scope and agreement.
Schedule maintenance based on usage conditions and service agreements.
Make judgment based on the tasks, configuration, and usage conditions of this model.
This page does not calculate the multi-gun capacity based on the overall machine flow; multiple working attachments require separate pumps, nozzles, piping, and split flow conditions.
You cannot directly equate them. You should obtain the standard operating range, power, and pump conditions of this model before determining anything.
First, check the pressure and flow rate records, then confirm the water supply capacity, the requirement for waste removal, and the engine and piping versions.
Cannot. First confirm the surface, environment, medium, and isolation requirements, and do not assume that the scene name applies to all ship parts.
Cleaning object, surface material, dirt, no-water areas, working distance, water supply and drainage conditions. For the gasoline plan, also check the outdoor environment, fuel, and transfer.
Verify each item on the order and delivery list. The long brush, angle nozzle, and base hose are separate from the additional hose length, rotating head, and floor scrubber, and are not determined by the image.
Retain J-5015H nameplate, configuration sheet, and random instructions. Check the engine visible condition, water supply, piping, and working attachment. Oils, cycles, and disassembly are according to the machine's instructions. The website does not provide cycles on its own.
Follow the random instructions of J-5015H for shutdown processing, record the water source, fittings, pipelines, and abnormal phenomena, then contact after-sales. Do not disassemble the pipe under pressure, and do not modify the pressure regulating or protection components according to the web image.
Tell us the cleaning object, the dirt, and the water supply conditions, and together see how the J-5015H is configured.
Phone consultation: 0755-25621811
Provide objects, stains, water and site information to check machine/accessory configuration.
