Supermarkets and shops
- Typical site
- Supermarkets and shelving aisles
- Why it fits
- Check entrances and turns around shelving. Assess walk-behind handling for zoned shop cleaning.
Jinjie Scrubber-Dryers
Jinjie J-D3C Compact Walk-Behind Floor Scrubber
The Jinjie J-D3C combines floor scrubbing and wastewater recovery for zoned cleaning in offices, shops and floor corridors. Check the surface, turning space, water access and operator arrangements together.
Established in 2004 | Site-trial discussion | Service support across China
Theoretical calculation speed: 5 km/hTheoretical cleaning coverage (calculated)： 2300 m²/hWebsite theoretical comparison calculation; not actual productivity.
Office property management
- Typical site
- Offices and shared corridors
- Why it fits
- Clean office corridors by zone and work window, checking entrances, turns and pedestrian access.
Property management
- Typical site
- Property areas and lift lobbies
- Why it fits
- Schedule zoned cleaning around resident access in lift lobbies and other shared areas. Confirm flooring, obstacles and storage first.
Typical applications
Smaller-area applications to assess for J-D3C
Supermarkets and shelving aisles
View detailed analysis →Routine supermarket-aisle cleaning
Plan scrubbing and pickup around shelving and display areas, with aisle-width and pedestrian-window checks before work.
Offices and shared corridors
View detailed analysis →Cleaning shared office corridors
Assess hard-floor office corridors with route-based scrubbing/pickup outside busy pedestrian periods.
Property areas and lift lobbies
View detailed analysis →Cleaning property lift lobbies and floor corridors
Assess daily cleaning of lift lobbies and shared floor corridors, checking turns, floor material and residual water.
J-D3C for routine cleaning of smaller hard-floor areas: assess access, scrubbing and water recovery together.
Cleaning challenges
Why assess a scrubber-dryer for repeated daily mopping in smaller areas?
Assess J-D3C where frequent routine cleaning combines with limited aisle and turning space. Check the narrowest route, lift entrances and turns alongside the daily cleaning area.
For frequent cleaning of offices, shops and floor corridors, J-D3C combines scrubbing and water pickup in one pass to replace suitable repeated mopping tasks.
Assess J-D3C on smaller zoned routes where doors, lifts and turns constrain larger machines. Confirm actual dimensions and manoeuvring clearance.
J-D3C combines scrubbing with wastewater recovery to address the water left by repeated mopping. Check residual water and safe reopening on the actual floor.
Selection guidance
Start with the floors to be cleaned each day and the available time. Wanshenglong considers the J-D3C scrubbing and recovery configuration alongside surfaces, access, water handling and staffing, helping buyers and operators assess the same cleaning task.
TECHNICAL SPECIFICATIONS
Walk-behind scrubberJ-D3C Technical specifications
Review the key configuration, then the full specifications.
Key specifications at a glance
Cleaning width460mm
Solution / recovery tank45L / 50L
Runtime2–3 hours
Battery configuration48V / 20Ah
Theoretical cleaning efficiency2300㎡/h
Dimensions1200×700×1050mm
Detailed specifications
Specifications grouped by cleaning performance, power and charging, and machine configuration.
| Cleaning performance | |||
|---|---|---|---|
| Cleaning width | 460mm | Squeegee width | 720mm |
| Solution tank | 45L | Recovery tank | 50L |
| Runtime | 2–3 hours | Theoretical cleaning efficiency | 2300㎡/h |
| Theoretical operating speed | 5 km/h | ||
| Power and charging | |||
| Working voltage | 48V | Power configuration | 48V / 20Ah |
| Battery brand | Standard Tianneng lead-acid battery | Brush motor | 400W |
| Vacuum motor | 300W | Charger | Smart charger |
| Charging time | Lead-acid: approximately 8 hours | ||
| Machine configuration | |||
| Dimensions | 1200×700×1050mm | Weight | 75kg |
| Operation | Walk-behind | Noise level | 68dB(A) |
Theoretical efficiency uses cleaning width × 5 km/h for comparison; it is not actual productivity. Standard battery: 48V / 20Ah lead-acid; runtime: 2–3 hours; charging: approximately 8 hours.
Construction and features
Body material
Injection-moulded engineering PE; resistant to acid and alkali corrosion
Frame construction
Steel frame, multi-layer galvanised electrophoretic coating and stainless fasteners
Squeegee assembly
Integrated pressure adjustment for different floor conditions
Water control
Solenoid-controlled water flow
Impact protection
Rubber guide wheels for improved impact protection
Controls
Manual lift and motor soft start
Understanding the specifications
What do these specifications mean on site?
Use J-D3C's working width, tanks, battery and dimensions to assess access, the daily task, filling/draining and operator handling rather than comparing figures alone.
Assess routine cleaning of smaller areas with restricted aisles.
Site checks: narrowest entrance, lift and turning space.Plan fewer interruptions for filling and draining on suitable smaller cleaning tasks.
Site checks: water points / wastewater disposal.Assess movement within floors, shops and shared corridors.
Site checks: charging location and daily frequency.Confirm entry, turning and parking space before purchase.
Site checks: doors, lifts, storage and ramps.Candidate applications / alternatives
Where does J-D3C fit, and when should a larger model be compared?
Candidate applicationsJ-D3C
- Routine scrubbing and pickup in smaller areas
- Frequent routine cleaning
- Frequent aisles and turns
- Manoeuvrability is important
Compare other models
- Larger continuous tasks
- Longer straight aisles
- Higher task capacity within the work window
- Powered travel required to reduce pushing effort
- Compare powered-travel or ride-on equipment
Compare related models
Options for larger areas or reduced pushing effort
Assess area, aisles, pushing effort and work duration before deciding between a compact walk-behind, powered-travel or ride-on machine.
| Item | J-D3C | J-D3 L | J-D5SL | J-D6SL | J-D7SL |
|---|---|---|---|---|---|
| When to assess this model | Smaller areas, restricted aisles and frequent routine cleaning | Compare configuration and handling within the compact walk-behind category | Larger areas with a need to reduce pushing effort | Compare ride-on options as continuous task area increases | Ride-on; compare the actual configuration and route rather than ranking productivity by model number |
| Work method | Walk-behind | Walk-behind | Powered travel | Ride-on | Ride-on |
| Conditions to compare | Minimum aisle width, turning space and daily area | Configuration, dimensions and actual access | Pushing effort, task duration and medium-area routes | Whether the route permits ride-on access | Working width, tanks and continuous routes |
Why assess J-D3C first?
Assess J-D3C's compact walk-behind layout where smaller areas require frequent cleaning and routes or turns restrict larger equipment. Confirm actual clearance by trial.
When should J-D5SL be compared?
Compare J-D5SL when the area or duration increases and powered travel is needed to reduce pushing effort.
When should a ride-on model be compared?
Compare ride-on models such as J-D6SL/J-D7SL for more open routes and larger continuous tasks where access and turning conditions allow them.
Related articles
More about J-D3C and compact scrubber-dryer selection
FAQ
Jinjie J-D3C Compact Walk-Behind Floor Scrubber — selection and operation questions
How should a compact commercial scrubber be selected for offices and shops?
Consider offices, shops and corridors requiring repeated cleaning of small zones. Assess the actual daily cleaning area, available time, surface, access and water points rather than total building area. For long routes, compare operator effort with a self-propelled machine on the same task.
What should be checked before J-D3C cleans tile, stone or epoxy floors?
For tile, inspect the glaze, joints and slip-resistant texture; for stone, confirm the material, finish and cleaner compatibility; for epoxy, check coating condition and the flooring supplier’s curing requirements. Use compatible brushes or pads and a suitable low-foam cleaner with J-D3C. Trial a small area and assess marking, soil removal and recovery before setting the routine. Harder brushes or stronger chemicals are not substitutes for compatibility.
How do 460 mm scrubbing and 720 mm squeegee widths affect walk-behind selection?
They describe scrubbing and recovery coverage respectively; neither alone establishes door or turning clearance. Check the machine envelope, squeegee edges and operator space. The current machine dimensions are 1200 × 700 × 1050 mm, but the actual complete equipment must also be checked.
How should filling and draining be planned for J-D3C's 45 L and 50 L tanks?
These are the current tank capacities, not a guarantee of continuous cleaning area or battery runtime. Water setting, soil and route affect replenishment. Identify suitable permitted filling and disposal points to avoid unnecessary travel between floors.
How should battery runtime and charging be planned for J-D3C?
Current information states 2–3 hours with a 48 V/20 Ah lead-acid battery configuration and approximately 8 hours charging. Battery condition, load and operation affect actual duration. Allow time for water handling and cleanup, use the matching charger, and follow the delivered instructions for charging conditions.
How should J-D3C cleaning productivity be assessed on the actual route?
Trial a representative route with straights, doors, turns and edges. Record completed area, cleaning and recovery quality, and total time including water handling, yielding and finishing. The listed theoretical 2300 m²/h is a comparison reference; use site records and required cleaning frequency to plan daily output.
How should J-D3C, J-D3L and self-propelled J-D5SL scrubbers be compared?
Keep the cleaning task constant and compare coverage, tanks, envelope, water handling and operation. The J-D3C and J-D3L are walk-behind options; the J-D5SL has self-propelled assistance. Assess pushing effort on longer routes. Self-propelled assistance is not autonomous navigation, and each delivery configuration remains separate.
What should be checked first when a walk-behind scrubber leaves water marks?
Stop safely and isolate power as instructed. Check the recovery tank, lid seal, suction hose, squeegee wear, trapped debris and floor contact. Joints and turns also matter. Replace wear parts according to condition, not a universal lifespan; do not dismantle energized components and contact service if needed.
What site information does Wanshenglong need for compact scrubber selection?
Provide photographs, actual cleaning area, surface and soil, narrow points, turns, working window, water points and staffing. Shenzhen Wanshenglong Cleaning Products Co., Ltd. can discuss Jinjie selection, trials, training and parts. On-site work, maintenance scope, charges and scheduling depend on location and agreement; verify suitability with a trial where model-specific case evidence is unavailable.
Product enquiry
Send your site conditions to assess whether J-D3C fits
Provide area, aisle width, floor material, ramps, daily frequency and powered-travel requirements to assess J-D3C suitability.