01 Intended use
- Scheduled road-cleaning routes
- Check road access, pickup and disposal against the A-version specification.
Jinjie road sweepers
Jinjie J-WX2400A Enclosed Ride-On Sweeper
The Jinjie J-WX2400A enclosed ride-on sweeper combines 2400 mm coverage and a listed 300 L tank for open campus main roads and longer routes, coordinating sweeping, driving and suppression-water planning.
48 V 200 Ah and a 300 L water tank support assessment of longer routes and replenishment planning.
Theoretical calculation speed:12 km/hTheoretical sweeping coverage (calculated):28800㎡/hWebsite theoretical comparison calculation; not actual productivity.
02 Key performance figures
- 2400 mm sweeping width
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls. Check the collection arrangement for the supplied version.
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Cleaning challenges
Common challenges in regular route sweeping
Water replenishment, charging and emptying affect work rhythm on long estate, municipal and industrial routes.
Grit, leaves, paper and loose dust require regular sweeping; wet sticky sludge and bulky debris need a different approach.
Sweeping width, hopper and auxiliary dust control affect selection; confirm them against the current configuration sheet.
Site conditions, configuration and selection
How would J-WX2400A work on your site?
Assess continuous wide roads, checking bottlenecks, height limits, turns and parking before driving configuration, the 48 V 200 Ah supply and water access. Trial collection, dust, visibility and disposal together.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-WX2400A |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-WX2400A with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Typical applications
3 sweeping applications for J-WX2400A
Larger estate roads
View detailed analysis →Continuous sweeping on longer routes
For long, scattered estate routes, 48 V 200 Ah and a 300 L tank support assessment of continuous sweeping and replenishment arrangements.
Municipal roads
View detailed analysis →Sweeping loose road dust and ordinary debris
Organize municipal sweeping around route length, debris volumes, water points and emptying points.
Industrial yards
View detailed analysis →Routine sweeping of open yards
Long industrial-yard routes with dust and grit require checks of road width, turns, charging and replenishment.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Effective sweeping width2400mm
Battery48 V 200 Ah: assess electric route work and shifts; confirm charging locations, shifts and route length on site.
Theoretical sweeping coverage (calculated)28800㎡/h
Theoretical calculation speed12 km/h
Water tank300 L: for sweeping dust control and replenishment planning; tank capacity does not establish fixed runtime.
Enclosed-cab operationFor longer operator-driven road work; confirm air conditioning and other comfort options against this model's sales configuration.
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Effective sweeping width | 2400mm | Theoretical calculation speed | 12 km/h |
| Theoretical sweeping coverage (calculated) | 28800㎡/h | Water tank | 300 L: for sweeping dust control and replenishment planning; tank capacity does not establish fixed runtime. |
| Enclosed-cab operation | For longer operator-driven road work; confirm air conditioning and other comfort options against this model's sales configuration. | Sweeping coverage | Confirm sweeping width for the current sales configuration before assessing road access and pass coverage. |
| Debris collection | Confirm hopper capacity, emptying method and distance to disposal before purchase. | Road conditions | Check road width, turns, gradients, height restrictions, mixed traffic and parking. |
| Replenishment planning | Check water and emptying points, charging, debris types and daily work windows. | ||
| Drive and electrical system | |||
| Battery | 48 V 200 Ah: assess electric route work and shifts; confirm charging locations, shifts and route length on site. | ||
How do these figures apply to your site?
Calculated as effective sweeping width × the website's standard theoretical speed of 12 km/h. Maximum travel speed remains a separate specification and is not used in this formula. The result is not actual or measured productivity.
Assess how coverage, collection, driving arrangements, dust control, emptying points and access affect actual work, rather than comparing numbers alone.
Structure and functions
How the systems on J-WX2400A work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check machine clearance and turns on the routine road-cleaning route.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-WX2400A gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-WX2400A?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-WX2400A suit the site, and when is another option appropriate?
Candidate applications
- Longer estate sweeping routes
- Routine municipal-road sweeping
- Open industrial-yard roads
- Enclosed operator environment required
- 300 L tank replenishment planning is important
Requires further assessment
- Projects requiring confirmed sweeping width or hopper capacity
- Task-specific auxiliary dust control required
- Narrow roads, frequent turns or unknown height clearance
- Wet sticky oily sludge, bulky debris or special dust
Comparing related models
How does J-WX2400A compare with similar models?
Compare access, debris load, turning space and configuration. Equal sweeping widths do not establish equal size or performance.
| Comparison criteria | Narrower-coverage option J-XS2100Q → | Current modelJ-WX2400A → | Options with equivalent sweeping width J-WX2400B → |
|---|---|---|---|
| Sweeping width | 2100mm | 2400mm | 2400mm |
| Hopper | Ask about this option when specifying the machine. | Ask about this option when specifying the machine. | Confirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts. |
| Water tank | Ask about this option when specifying the machine. | 300L | Confirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts. |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-WX2400A?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-WX2400A
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-WX2400A enclosed-cab ride-on sweeper: selection and operating questions
Which roads suit the enclosed J-WX2400A sweeper?
Assess open campus main roads, factory perimeters and longer hard-surface routes with ordinary debris. Check gates, height limits and turns for the 2400 mm coverage and machine access.
How should wide coverage fit campus traffic?
Segment main roads, branches and junctions and define direction and work windows. Use orderly passes, provide traffic clearance and coordinate disposal and replenishment routes.
What value does the 300 L tank offer on longer routes?
Use it for water planning after confirming the system and supply points and recording task consumption. Manage water alongside filters, seals and cleaning rather than converting capacity into fixed hours.
How should enclosed driving be assessed?
Check visibility, boarding, braking and height limits and confirm comfort options against the list. Route-based training covers observation, turning, stopping and safe operation.
How should 48 V 200 Ah support longer shifts?
Confirm battery, charger and safe charging access and record sweeping, waiting, disposal and water. Use the actual task to schedule handover and charging.
What are the daily maintenance priorities?
After safe shutdown, empty collection areas, inspect brushes and service filters, seals and water lines. Check driving and charging as instructed and retain version-specific parts and maintenance records.
How should A, R and B be compared?
All list 2400 mm coverage. A lists 300 L water and R 200 L; confirm B suppression and capacities from its configuration. Compare routes, water, driving and supplies rather than width alone.
How can Wanshenglong support the road-cleaning plan?
Share route maps, widths, height limits, waste and water access to agree trials and configuration. Handover covers driving, brushes, filtration, water, disposal and care for everyday use.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-WX2400A.
Phone consultation: 0755-25621811
Product enquiry
Describe your longer road routes to assess J-WX2400A
Provide road width, route length, debris types, water and emptying points, charging and height restrictions.