01 Intended use
- Wide roads and main estate roads
- For rounds collecting ordinary road debris, check the route and disposal arrangements.
Jinjie road sweepers
Jinjie J-WX2400B Wide Road Sweeper
The Jinjie J-WX2400B wide road sweeper addresses daily campus-road and industrial-outdoor sweeping with auxiliary suppression needs, using 2400 mm coverage and its specified brushes, filtration and suppression configuration.
2400 mm sweeping coverage with fog-cannon auxiliary dust suppression.
Theoretical calculation speed:12 km/hTheoretical sweeping coverage (calculated):28800㎡/hWebsite theoretical comparison calculation; not actual productivity.
02 Key performance figures
- 2400 mm sweeping width with a mist cannon for supplementary dust suppression
- Coordinate sweeping and supplementary dust suppression with the debris, wind and site traffic.
03 Working configuration
- Enclosed cab with manual driving controls
- Plan replenishment, emptying and maintenance for the supplied configuration.
Start with your site
What would you like to clean?
Cleaning challenges
Common challenges in regular route sweeping
Where large roads and yards have loose dust, sweeping alone may disturb neighbours or road users.
A fog cannon provides auxiliary suppression; results depend on water supply, wind, dust properties and work windows.
Plan fog-cannon auxiliary suppression together with water points, debris disposal and work windows.
Site conditions, configuration and selection
How would J-WX2400B work on your site?
Describe debris and dust separately: amounts, dust sources, nearby traffic and water access. Review sweeping, filtration and auxiliary suppression, then trial collection, airborne dust and surfaces to plan staff, supplies and care.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-WX2400B |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-WX2400B with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Typical applications
3 sweeping applications for J-WX2400B
Large roads
View detailed analysis →Wide sweeping and loose-dust control
For wide roads with noticeable loose dust, assess 2400 mm sweeping and fog-cannon auxiliary suppression together.
Industrial yards
View detailed analysis →Routine grit and dust sweeping
For common industrial-yard grit and dust, confirm water points, wind and safe passing for people and vehicles.
Estate main roads
View detailed analysis →Main-road sweeping with dust-control needs
For longer estate main-road duties with dust, assess sweeping and auxiliary suppression within the same work plan.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Effective sweeping width2400mm
Sweeping width2400 mm: assess pass coverage on wide roads; confirm narrowest access, turns and whole-machine clearance.
Water tank / hopper / batteryConfirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts.
Theoretical sweeping coverage (calculated)28800㎡/h
Theoretical calculation speed12 km/h
Suitable debrisLeaves, grit, paper and ordinary dust; wet oily sludge, bulky debris and special dust require separate assessment.
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Effective sweeping width | 2400mm | Theoretical calculation speed | 12 km/h |
| Theoretical sweeping coverage (calculated) | 28800㎡/h | Suitable debris | Leaves, grit, paper and ordinary dust; wet oily sludge, bulky debris and special dust require separate assessment. |
| Water replenishment conditions | Fog-cannon use depends on water replenishment; check water points, wind, people, vehicles and work windows. | Work rhythm | Assess output against road width, debris volumes, wind, water replenishment and emptying. |
| Road conditions | Check road width, turns, height clearance, gradients, mixed traffic and parking. | Dust conditions | Check dust sources, wind, water points, work windows and whether spraying is permitted. |
| Drive and electrical system | |||
| Water tank / hopper / battery | Confirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts. | ||
How do these figures apply to your site?
Calculated as effective sweeping width × the website's standard theoretical speed of 12 km/h. Maximum travel speed remains a separate specification and is not used in this formula. The result is not actual or measured productivity.
Assess how coverage, collection, driving arrangements, dust control, emptying points and access affect actual work, rather than comparing numbers alone.
Components and their functions
Sweeping width
2400 mm: assess pass coverage on wide roads; confirm narrowest access, turns and whole-machine clearance.
Fog-cannon dust suppression
For auxiliary control of sweeping dust and locally settleable particles; confirm results against actual dust properties.
Structure and functions
How the systems on J-WX2400B work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check machine clearance and turns on the routine road-cleaning route.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-WX2400B gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-WX2400B?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-WX2400B suit the site, and when is another option appropriate?
Candidate applications
- Large roads with noticeable airborne dust
- Industrial-yard grit and loose-dust sweeping
- Estate main-road sweeping
- Enclosed operator environment required
- Fog-cannon auxiliary suppression required
Requires further assessment
- Ordinary sweeping without additional dust-control needs
- Projects requiring confirmed tank, hopper, battery or output information
- Narrow roads, frequent turns or unknown height clearance
- Wet sticky oily sludge, bulky debris or special dust
Comparing related models
How does J-WX2400B compare with similar models?
Compare access, debris load, turning space and configuration. Equal sweeping widths do not establish equal size or performance.
| Comparison criteria | Options with equivalent sweeping width J-WX2400A → | Current modelJ-WX2400B → | Options with equivalent sweeping width J-WX2400R → |
|---|---|---|---|
| Sweeping width | 2400mm | 2400mm | 2400mm |
| Hopper | Ask about this option when specifying the machine. | Confirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts. | Ask about this option when specifying the machine. |
| Water tank | 300L | Confirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts. | 200L |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-WX2400B?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-WX2400B
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-WX2400B wide road sweeper: selection and operating questions
Which sweeping and suppression tasks suit J-WX2400B?
Assess loose debris and ordinary dust on wide campus roads and industrial outdoor areas. Identify materials, then check coverage, access and specified suppression for the site.
What are the roles of sweeping, filtration and mist suppression?
Brushes gather and feed debris, collection and filtration handle suitable particles, and specified mist equipment provides auxiliary suppression. Observe residue, dust and water rather than only the spray.
Where should a dusty outdoor trial be observed?
Trial representative dusty sections, edges and traffic areas and observe collection, dust, visibility and wet surfaces. Assess special or hazardous dust separately from ordinary road sweeping.
How should water and routes be planned?
Plan supply points around the actual suppression system and tank and record sweeping, suppression, disposal and replenishment separately. Adapt to wind, traffic and surface conditions.
How should edges and connections be swept?
Use continuous passes on wide roads and coordinate side and main brushes at edges. Measure gates and turns against the machine and assess tree pits, barriers and tight corners for finishing.
What after-shift care is needed?
Empty collection areas, inspect brushes after shutdown and service filters, seals and suppression water lines as instructed. Check driving and power and pass equipment condition to the next shift.
How should it be compared with an ordinary wide sweeper?
Where road-dust management is also needed, assess auxiliary suppression separately. For ordinary debris, focus on routes, collection, filtration and supplies and select functions for the actual task.
What site information should Wanshenglong receive?
Provide road dimensions, debris and dust photos, sources, nearby traffic, water access and work windows to discuss trials, configuration, training and maintenance for both tasks.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-WX2400B.
Phone consultation: 0755-25621811
Product enquiry
Describe dust and road conditions to assess J-WX2400B
Provide road width, dust sources, water points, wind, debris types, height clearance and work windows.