01 Intended use
- Road sweeping and waste transport
- Match the route to the actual R-version equipment. Check compatibility separately for other versions.
Jinjie road sweepers
Jinjie J-WX2400R Enclosed Road Sweeper
The Jinjie J-WX2400R enclosed road sweeper combines 2400 mm coverage and a listed 200 L tank for open roads and campus main routes, coordinating sweeping, driving, water and waste handling.
48 V 200 Ah and a 200 L water tank for assessing frequent long-route sweeping.
Theoretical calculation speed:12 km/hTheoretical sweeping coverage (calculated):28800㎡/hWebsite theoretical comparison calculation; not actual productivity.
02 Key performance figures
- 2400 mm sweeping width
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls. Check the collection arrangement for the supplied version.
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Cleaning challenges
Common challenges in regular route sweeping
Charging, water and emptying affect shifts on frequent estate, road and industrial-yard routes.
Road width, debris volumes, emptying distance, water points and shifts all affect actual productivity.
For height restrictions or dust-control requirements, confirm whether the current sales configuration fits before purchase.
Site conditions, configuration and selection
How would J-WX2400R work on your site?
Check widths, height limits and turning space before driving configuration, the 48 V 200 Ah supply and 200 L water arrangement. Trial actual debris and routes to compare collection, dust and disposal by task and shift.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-WX2400R |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-WX2400R with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Typical applications
3 sweeping applications for J-WX2400R
Larger estate roads
View detailed analysis →Frequent sweeping along long routes
For frequent long routes, use 48 V 200 Ah and the 200 L tank to assess electric sweeping and replenishment arrangements.
Industrial yards
View detailed analysis →Ordinary yard-debris sweeping
Industrial yards with dust, grit and paper require checks of road width, emptying points and charging.
Municipal / estate roads
View detailed analysis →Longer operation with an enclosed cab
Long outdoor shifts make the operator environment important; confirm comfort equipment and height clearance against the sales configuration.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Effective sweeping width2400mm
Battery48 V 200 Ah: assess long electric routes and shifts; check charging locations, route length and gradients on site.
Theoretical sweeping coverage (calculated)28800㎡/h
Theoretical calculation speed12 km/h
Water tank200 L: for sweeping dust control and replenishment planning; capacity does not establish fixed runtime.
Enclosed-cab operationFor longer operator-driven road work; confirm air conditioning and other comfort options against this model's sales configuration.
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Effective sweeping width | 2400mm | Theoretical calculation speed | 12 km/h |
| Theoretical sweeping coverage (calculated) | 28800㎡/h | Water tank | 200 L: for sweeping dust control and replenishment planning; capacity does not establish fixed runtime. |
| Enclosed-cab operation | For longer operator-driven road work; confirm air conditioning and other comfort options against this model's sales configuration. | Work rhythm | Assess productivity against route length, debris volume, emptying points, water points and shifts. |
| Sweeping coverage / debris collection | Confirm sweeping width, hopper capacity and emptying method for the current sales configuration. | Task-specific dust-control configuration | For demanding dust-control needs, confirm the appropriate auxiliary suppression configuration before purchase. |
| Access conditions | Check road width, turns, gradients, height restrictions, mixed traffic and parking. | Configuration conditions | Confirm height clearance and special configurations against the current sales specification; they are not assumed capabilities. |
| Drive and electrical system | |||
| Battery | 48 V 200 Ah: assess long electric routes and shifts; check charging locations, route length and gradients on site. | ||
How do these figures apply to your site?
Calculated as effective sweeping width × the website's standard theoretical speed of 12 km/h. Maximum travel speed remains a separate specification and is not used in this formula. The result is not actual or measured productivity.
Assess how coverage, collection, driving arrangements, dust control, emptying points and access affect actual work, rather than comparing numbers alone.
Structure and functions
How the systems on J-WX2400R work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check machine clearance and turns on the routine road-cleaning route.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-WX2400R gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-WX2400R?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-WX2400R suit the site, and when is another option appropriate?
Candidate applications
- Frequent large-estate sweeping
- Long industrial-yard sweeping routes
- Municipal and estate-road sweeping
- Enclosed operator environment required
- 48 V 200 Ah and a 200 L water tank are selection priorities
Requires further assessment
- Projects requiring confirmed sweeping width, hopper or output
- A specified task-specific dust-control configuration is required
- Narrow roads, frequent turns or unknown height clearance
- Wet sticky oily sludge, bulky debris or special dust
Comparing related models
How does J-WX2400R compare with similar models?
Compare access, debris load, turning space and configuration. Equal sweeping widths do not establish equal size or performance.
| Comparison criteria | Options with equivalent sweeping width J-WX2400B → | Current modelJ-WX2400R → | No larger comparable model is currently listed. |
|---|---|---|---|
| Sweeping width | 2400mm | 2400mm | — |
| Hopper | Confirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts. | Ask about this option when specifying the machine. | — |
| Water tank | Confirm capacities and battery details from the current configuration sheet to plan water, emptying and shifts. | 200L | — |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | No comparable product is currently listed in this category. |
Operating cost
What does it cost to operate J-WX2400R?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-WX2400R
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-WX2400R enclosed-cab road sweeper: selection and operating questions
Which road-cleaning tasks suit J-WX2400R?
Assess open campus main roads, factory perimeters and longer hard-surface routes. Match 2400 mm coverage to road space and check gates, height limits and stopping locations.
How does the 200 L tank support suppression?
Use the specified water system, trial consumption and supply distance and maintain filters, seals and cleaning together. Tank capacity alone does not establish fixed operating hours.
What should be checked for enclosed driving?
Assess visibility, boarding, turning, braking and height limits and confirm comfort options in the list. Trial the route so drivers know obstacles and safe stopping points.
How should long-route leaves, paper and grit be collected?
Segment by debris concentration, remove entangling and large objects first and observe brush gathering and collection. Record volume, weight and disposal travel for safe routing.
How should 48 V 200 Ah fit shifts?
Check the actual battery, charger and route load and record sweeping, waiting, disposal and water. Schedule charging and handover around the task and staff supplies.
How should daily care be carried out?
After shutdown, empty waste and check brushes, filters, seals, water and charging connections. Inspect driving and brakes as instructed and retain model-specific parts and fault records.
How should R and A be compared?
Both list 2400 mm coverage; R lists 200 L water and A 300 L. Compare actual water needs, routes, driving, power, disposal and care rather than tank size alone.
How can Wanshenglong support on-site use?
Share routes, clearances, debris and shifts to agree trials and configuration. Handover covers driving, brushes, filtration, water and care, with model-specific consumable support.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-WX2400R.
Phone consultation: 0755-25621811
Product enquiry
Describe your frequent long-route requirements to assess J-WX2400R
Provide road width, route length, debris types, height clearance, water points, charging and sales-configuration requirements.