01 Intended use
- Zoned cleaning of residential access roads
- For daily collection of loose litter, check corners and connecting roads.
Jinjie road sweepers
Jinjie J-XS1280 Compact Ride-On Sweeper
The Jinjie J-XS1280 compact ride-on sweeper suits segmented parking, factory-side-road and property-connection routes. Its 1280 mm coverage, 80 L hopper and 36 V supply support daily loose-debris collection.
1280 mm ride-on sweeping coverage can reduce repeated manual passes on small and medium roads.
Theoretical calculation speed:12 km/hTheoretical sweeping coverage (calculated):15360㎡/hWebsite theoretical comparison calculation; not actual productivity.
02 Key performance figures
- 1280 mm sweeping coverage
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls and 80 L hopper
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Video and application reference
J-XS1280 on-site sweeping video
View ride-on sweeping, side-brush work and debris collection; selection still depends on road conditions and debris types.
J-XS1280 Operating guide
The original recording illustrates equipment appearance and operation. Confirm the supplied configuration against the order and relevant version.
Start with your site
What would you like to clean?
Cleaning challenges
Common challenges in regular route sweeping
Scattered side roads, warehouse yards and property perimeters can make repeated manual sweeping inconsistent.
For restricted aisles, entrances and turns, assess access for a smaller ride-on machine first.
Do not borrow neighbouring-model hopper, runtime, dust-control or dimension data before confirming this configuration.
Site conditions, configuration and selection
How would J-XS1280 work on your site?
For parking areas, measure bay ends, columns and narrow aisles; add loading-vehicle clearance for factory side roads. Check access and parking for the listed 1500 × 1100 × 1219 mm machine and trial loading, dust and charging arrangements.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-XS1280 |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-XS1280 with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Typical applications
3 sweeping applications for J-XS1280
Estate side roads
View detailed analysis →Regular small/medium-road sweeping
For scattered estate side-road routes where manual return passes take time, 1280 mm coverage supports regular mechanical sweeping.
Warehouse yards
View detailed analysis →Collecting grit and paper around warehouses
Warehouse yards commonly contain grit, paper and loose dust; ride-on work can reduce long walking routes.
Property surroundings
View detailed analysis →Fixed-route property-perimeter cleaning
Where property-perimeter roads are narrow, check the narrowest section, turns, parking and charging first.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Effective sweeping width1280mm
Sweeping width1280 mm: regular small/medium-road sweeping; check road width and turning space on site.
hopper capacity80L
Runtime reference3–4h
Theoretical sweeping coverage (calculated)15360㎡/h
Machine dimensions1500×1100×1219mm
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Effective sweeping width | 1280mm | Theoretical calculation speed | 12 km/h |
| Theoretical sweeping coverage (calculated) | 15360㎡/h | Sweeping width | 1280 mm: regular small/medium-road sweeping; check road width and turning space on site. |
| Suitable debris | Leaves, paper, grit and ordinary dust; wet sticky waste, bulky items and entangling material require separate assessment. | Emptying arrangements | Do not assert unconfirmed hopper capacity; assess the work rhythm by debris volume, density and emptying points. |
| hopper capacity | 80L | Filter area | 5㎡ |
| Driving arrangement | Ride-on work reduces walking but still requires an operator, observation and maintenance. | Runtime reference | 3–4h |
| Access conditions | Check narrowest roads, entrances, turns, gradients, parking and charging locations. | Working conditions | Check daily area, debris types, dust, emptying points and work windows. |
| Drive and electrical system | |||
| Power information | 36 V: plan compatible charging and shifts; confirm runtime for the actual battery and route. | Total motor power | 1600W |
| Travel motor | 800W | Charge-time reference | 8–10h |
| Machine configuration | |||
| Machine dimensions | 1500×1100×1219mm | ||
How do these figures apply to your site?
Calculated as effective sweeping width × the website's standard theoretical speed of 12 km/h. Maximum travel speed remains a separate specification and is not used in this formula. The result is not actual or measured productivity.
Assess how coverage, collection, driving arrangements, dust control, emptying points and access affect actual work, rather than comparing numbers alone.
Structure and functions
How the systems on J-XS1280 work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check the machine footprint and turning envelope on each section of the residential route.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-XS1280 gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-XS1280?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-XS1280 suit the site, and when is another option appropriate?
Candidate applications
- Estate side roads
- Warehouse yards
- Property surroundings
- Regular small/medium-road sweeping
- Fixed routes where manual sweeping takes time
Requires further assessment
- Projects requiring confirmed hopper, runtime, dust-control or dimension details
- Very long routes, high debris volumes or larger-capacity requirements
- Wet sticky waste, oily sludge or scrubbing and water-recovery duties
- Complex gradients and access conditions
Comparing related models
How does J-XS1280 compare with similar models?
To compare machines, consider road layout, debris load and turning room alongside sweeping width.
| Comparison criteria | Narrower-coverage option J-XS1250 → | Current modelJ-XS1280 → | Wider-coverage option J-XS1300 → |
|---|---|---|---|
| Sweeping width | 1250mm | 1280mm | 1300mm |
| Hopper | 120L | 80L | 80L |
| Water tank | 65L | Ask about this option when specifying the machine. | 30L |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-XS1280?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-XS1280
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-XS1280 compact ride-on sweeper: selection and operating questions
Is J-XS1280 suitable for parking areas?
Consider it for daily sweeping organised around bays and main aisles. Measure columns, bay ends and exits and schedule quieter periods. Assess ramps, ventilation and safe clearance separately.
How should 1280 mm coverage guide routing?
Plan continuous main-aisle passes followed by bay ends and edges to avoid disorganised travel. Measure bottlenecks against the body, brushes and turns; coverage is not overall access width.
How should parking debris be collected?
Remove entangling and large objects first, then trial side-brush gathering and main-brush collection. Plan the 80 L hopper around volume and permitted load, especially where grit adds weight.
How does the 5 m² filter support dust management?
Assess it with media condition, sealing and maintenance and observe fine dust and residue in a trial. Moist waste, clogging and poor seals affect results; assess special dust separately.
How should charging be planned for the 36 V supply?
Provide safe charging for the specified battery and charger. Use the listed 3–4 hour runtime and 8–10 hour charging references for initial scheduling, then verify on site and confirm battery type and interfaces.
What should be checked after a shift?
Empty the hopper, inspect brush wear and entanglement after shutdown, service filters as instructed and check charging connections. Record unusual noise or collection changes and match parts to the original specification.
How should J-XS1280 and J-XS1300 be compared?
Coverage is 1280 and 1300 mm and listed hoppers are both 80 L, but power, brushes and dimensions need separate checks. Prioritise turns and traffic in parking areas and compare complete routes, disposal and dust.
What should I prepare for a parking-sweeper consultation?
Send bay and aisle photos, minimum dimensions, typical debris and cleaning windows. These support J-XS1280 configuration, trial and training discussions before the machine arrives.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-XS1280.
Phone consultation: 0755-25621811
Product enquiry
Describe your small/medium-road conditions to assess J-XS1280
Provide road width, route length, debris types, emptying points, gradients, parking and charging facilities.