01 Intended use
- Roads on small and medium-sized estates and factory sites
- For routine rounds and scattered litter, check gateways, turns and disposal access first.
Jinjie road sweepers
Jinjie J-XS1300 ride-on sweeper
The Jinjie J-XS1300 ride-on sweeper suits daily cleaning of factory aisles, property roads and parking areas. Its 1300 mm coverage, main brush and twin side brushes gather loose road and kerbside debris into an 80 L hopper for area-based sweeping and disposal.
1300 mm coverage with main and side brushes for regular leaves, paper, grit and loose dust.
02 Key performance figures
- 1300 mm sweeping width
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls and 80 L hopper
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Typical applications
Which routine sweeping tasks suit J-XS1300?
Property / estate roads
View detailed analysis →Regular property and estate-road sweeping
Collect leaves, paper and ordinary light debris on property and estate roads.
Factory / warehouse surroundings
View detailed analysis →Factory and warehouse perimeter roads
For dust, fragments and scattered light debris around factories and warehouses.
Campus / visitor attraction / commercial surroundings
View detailed analysis →Campus, visitor attraction and commercial perimeter routes
For regular sweeping of public areas along fixed routes.
Cleaning challenges
Common challenges in daily road sweeping
Long estate and property routes make repeated manual sweeping time-consuming and harder to schedule consistently.
Outdoor debris is scattered and keeps accumulating, calling for regular route sweeping.
Small and medium roads require coverage balanced against turning and access.
Site conditions, configuration and selection
How would J-XS1300 work on your site?
Consider J-XS1300 for daily leaves, paper, grit and ordinary loose dust. Measure gates, spaces between vehicles and turns, then trial representative debris and observe edges, dust and hopper loading. Compare narrower or wider models by collection, filtration, battery and disposal access as well as coverage.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-XS1300 |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-XS1300 with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Sweeping width1300mm
hopper capacity80L
Working rate9800㎡/h
Side-brush dimensions500mm × 2
Main-brush dimensions530mm × 1
Overall dimensions (length × width × height)1550 × 1300 × 1160mm
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Sweeping width | 1300mm | Continuous operating time | 2–3 hours |
| Working rate | 9800㎡/h | Gradeability | 20% |
| Water tank capacity | 30L | hopper capacity | 80L |
| Drive and electrical system | |||
| Power source | 48 V, 45 A (4 maintenance-free batteries) | Drive power | 800W |
| Main brush power | 700W | Side-brush power | 100W × 2 |
| Filter-shaker power | 200W | Fan power | 500W |
| Machine configuration | |||
| Side-brush dimensions | 500mm × 2 | Main-brush dimensions | 530mm × 1 |
| Brake system | Drum brake | Weight | 300kg |
| Overall dimensions (length × width × height) | 1550 × 1300 × 1160mm | Product model | J-XS1300 |
Structure and functions
How the systems on J-XS1300 work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check the machine footprint and turning envelope on small and medium-sized estate roads.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-XS1300 gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-XS1300?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
Which roads suit J-XS1300, and when should another system be considered?
Candidate applications
- Property and estate roads.
- Factory / warehouse surroundings.
- Campus / commercial surroundings.
- Leaves, paper and ordinary light debris.
Requires further assessment
- Heavy debris / construction waste.
- Very narrow roads.
- Frequent gradients.
- Prolonged intensive continuous operation.
- Special dust-suppression requirements.
Comparing related models
How does J-XS1300 compare with similar models?
To compare machines, consider road layout, debris load and turning room alongside sweeping width.
| Comparison criteria | Narrower-coverage option J-XS1280 → | Current modelJ-XS1300 → | Wider-coverage option J-XS1450 → |
|---|---|---|---|
| Sweeping width | 1280mm | 1300mm | 1450mm |
| Hopper | 80L | 80L | 160L |
| Water tank | Ask about this option when specifying the machine. | 30L | Ask about this option when specifying the machine. |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-XS1300?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-XS1300
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-XS1300 ride-on sweeper: selection and operating questions
Which factory and property routes suit the J-XS1300 ride-on sweeper?
Consider hard-surface factory aisles, property roads and parking areas with defined routes and predominantly loose dry debris. The 1300 mm figure is sweeping coverage; also measure gates, turns and vehicle clearance for the complete route.
Can J-XS1300 collect leaves, paper and grit?
Use these materials in the site trial. Leaves and paper occupy volume while grit also adds weight. Remove straps, large objects and entangling material first, then assess brush feeding, collection and disposal intervals for the 80 L hopper.
How do the twin side brushes and main brush clean kerbs?
The side brushes guide loose debris from the sides towards the main-brush collection path. Keep suitable clearance at kerbs and walls and account for brush wear. Plan manual finishing behind columns and in tight corners.
How should filtration and dust suppression be assessed?
Identify the dust and check filters, sealing, filter cleaning and water configuration together. The 30 L tank supports the specified suppression task but does not replace filter care. Observe dust and collection in a trial; assess hazardous dust separately.
How should charging and daily shifts be planned?
Plan a safe charging point for the actual 48 V battery configuration and include sweeping, disposal, water and after-shift care. Use the listed 2–3 hours as a reference, then record energy use and completion time on the intended route.
What after-shift maintenance does J-XS1300 need?
After safe shutdown, empty the hopper, inspect brushes for entanglement and service filters as instructed. Check seals, water lines and charging connections. Record wear and faults and provide the model and original-part information when ordering replacements.
How does J-XS1300 compare with J-XS1250 and J-XS1450?
Check access before debris loading. Listed coverage is 1300, 1250 and 1450 mm, with hoppers of 80, 120 and 160 L respectively. Compare turns, filtration, power and disposal distance; wider coverage alone does not determine suitability.
What should I send Wanshenglong for J-XS1300 selection?
Send road photos, minimum widths, daily routes, waste samples and current shifts. These support discussions about configuration, trials, operator training and parts, with a model-specific handover list shared by procurement and operating staff.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-XS1300.
Phone consultation: 0755-25621811
Product enquiry
Tell us about the route and debris
Provide road width, sweeping area, main debris types and daily hours to assess J-XS1300.
Provide these site details to check whether J-XS1300 is suitable.
- Sweeping area / daily area
- Narrowest aisle width
- Main debris types
- Indoor / outdoor
- Is there a slope?
- Daily working time
- Water-spray dust suppression required?