01 Intended use
- Factory yards and wider sites
- Plan shifts for longer routes and allow room for people and vehicles around loading bays.
Jinjie road sweepers
Jinjie J-XS1500 Ride-On Sweeper
The Jinjie J-XS1500 ride-on sweeper combines 1500 mm coverage, a 180 L hopper and an 80 L tank for campus roads, factory perimeters and open parking areas.
1500 mm sweeping width and a 180 L hopper support organized collection of scattered road debris.
02 Key performance figures
- 1500 mm sweeping width
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls and 180 L hopper
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Typical applications
3 sweeping applications for J-XS1500
Large property estates
View detailed analysis →Continuous sweeping of longer estate roads
On open roads with scattered debris, 1500 mm coverage can reduce manual return passes and support planned route work.
Factory roads
View detailed analysis →Factory-yard grit and packaging-fragment sweeping
J-XS1500 is a candidate for fixed-route collection of factory-road grit, packaging fragments and ordinary dust, reducing scattered manual duties.
Underground car parks / parking areas
View detailed analysis →Car-park aisle and parking-area sweeping
Collect ordinary dry debris along car-park aisles; check clearance height, turns, vehicle traffic and ventilation before work.
Cleaning challenges
Common challenges in regular route sweeping
Route length, coverage, debris collection and access jointly affect routine sweeping.
Long medium/large estate, factory and campus routes can occupy considerable time when swept manually.
Leaves, paper, grit and packaging fragments on different sections require more consistent route collection.
Debris volume, density and emptying distance affect continuity during a shift.
Site conditions, configuration and selection
How would J-XS1500 work on your site?
Check access for the listed 1800 × 1500 × 1900 mm machine at gates, tree pits and turns, then trial continuous routes. Plan hopper disposal, the 48 V 100 Ah supply, water and filter care together.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-XS1500 |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-XS1500 with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Sweeping width1500mm
hopper capacity180L
Battery configurationChaowei or Tianneng, 48 V, 100 Ah
Operating voltage48V
Working rateUp to 14000 m²/h
Overall dimensions (length × width × height)1800 × 1500 × 1900mm
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Sweeping width | 1500mm | Working rate | Up to 14000 m²/h |
| Water tank capacity | 80L | hopper capacity | 180L |
| Maximum travel speed | 12km/h | Main brush length | 690mm |
| Main brush diameter | 300mm | Side brush diameter | 600mm |
| Drive and electrical system | |||
| Battery configuration | Chaowei or Tianneng, 48 V, 100 Ah | Operating voltage | 48V |
| Drive power | 1200W | Main brush power | 1200W |
| Vacuum motor power | 600W | ||
| Machine configuration | |||
| Overall dimensions (length × width × height) | 1800 × 1500 × 1900mm | Overall weight | 570kg |
| Product model | J-XS1500 | ||
Structure and functions
How the systems on J-XS1500 work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check overall dimensions and turning room in larger factory yards.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-XS1500 gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-XS1500?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-XS1500 suit the site, and when is another option appropriate?
Where J-XS1500 fits best
- Medium/large estate roads
- Factory yards, campuses and visitor attractions
- Dry-debris sweeping along longer routes
- Scattered leaves, grit and paper
Compare other models
- Narrow roads or dense fixed obstacles
- Wet waste, oily sludge or floor-scrubbing/water-recovery needs
- Frequent bulky items or entangling material
- Assess other configurations when a cab enclosure is required
Comparing related models
How does J-XS1500 compare with similar models?
To compare machines, consider road layout, debris load and turning room alongside sweeping width.
| Comparison criteria | Narrower-coverage option J-XS1460 → | Current modelJ-XS1500 → | Wider-coverage option J-XS1550 → |
|---|---|---|---|
| Sweeping width | 1460mm | 1500mm | 1550mm |
| Hopper | 150L | 180L | 80L |
| Water tank | 60L | 80L | 45L |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-XS1500?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-XS1500
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-XS1500 ride-on sweeper: selection and operating questions
Which campus roads suit J-XS1500?
Assess relatively continuous routes with loose dry debris. Use 1500 mm coverage to plan passes and check connections, turns and height limits for the complete machine.
How does the 180 L hopper help with leaf-heavy routes?
Use collection volume when dividing routes and trial leaf volume, density and disposal distance to set stops. Respect permitted loads as well as volume.
How should mixed grit and paper be assessed?
Trial brush feeding and collection with actual mixed debris, considering grit weight and paper volume. Remove long and large objects first and adjust task order as needed.
How is the 80 L tank used for suppression?
Use the specified configuration and plan around dust, consumption and supply points. Filters, sealing and cleaning still need care; suppression is not floor scrubbing and recovery.
How should 48 V 100 Ah fit daily shifts?
Confirm battery type and charger and record sweeping, disposal, water and waiting on the intended route. Use the trial to schedule charging and care rather than inferring runtime from capacity alone.
How are brushes and filtration kept in condition?
After shutdown, inspect entanglement, wear and mounting, clean filters and hopper as instructed and check seals and water lines. Record changes in residue or dust to guide maintenance.
How does it compare with J-XS1460 and J-XS1550?
Coverage is 1500, 1460 and 1550 mm, with hoppers of 180, 150 and 80 L. Coverage and collection volume do not rise together; compare routes, waste, power and disposal.
How should a trial be prepared with Wanshenglong?
Share route dimensions, debris and disposal locations and select representative straight, edge and turning sections. Assess collection, dust and operation before confirming configuration, training and parts.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-XS1500.
Phone consultation: 0755-25621811
Product enquiry
Describe the route to assess J-XS1500
Provide road width, route length, debris types, emptying points, work windows and operator-enclosure needs.