01 Intended use
- Wider roads and open areas
- On long routes, check narrow gates, overhead clearance and access to waste disposal.
Jinjie road sweepers
Jinjie J-XS1800 Wide Ride-On Sweeper
The Jinjie J-XS1800 wide ride-on sweeper combines 1880 mm effective coverage and a 180 L hopper for broad factory routes, loading surroundings and open parking areas.
1880 mm coverage can reduce repeated passes on open roads.
Theoretical calculation speed:12 km/hTheoretical sweeping coverage (calculated):22560㎡/hWebsite theoretical comparison calculation; not actual productivity.
02 Key performance figures
- 1880 mm sweeping width
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls and 180 L hopper
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Typical applications
3 sweeping applications for J-XS1800
Factory yards
View detailed analysis →Wide-coverage sweeping on open factory roads
On wider factory roads and longer routes, 1880 mm coverage can reduce repeated passes and organize sweeping more continuously.
Logistics-park roads
View detailed analysis →Routine sweeping around logistics traffic
Coordinate sweeping with logistics traffic. J-XS1800 is a candidate for open sections, helping reduce broad-area manual follow-up.
Larger estate roads
View detailed analysis →Debris collection along longer routes
On long routes with scattered debris, a 180 L hopper can reduce frequent emptying and help organize continuous shifts.
Cleaning challenges
Common challenges in regular route sweeping
Route length, coverage, debris collection and access jointly affect routine sweeping.
Insufficient coverage on wider factory, logistics and estate roads can require more repeated passes.
Narrowest sections, columns, turns and mixed traffic determine whether 1880 mm coverage can be used effectively.
Debris volume, emptying locations and work windows affect route interruptions.
Site conditions, configuration and selection
How would J-XS1800 work on your site?
Assess transitions between open straight routes and narrow connections using 1880 mm coverage. Coordinate loading-area traffic before trialling grit, paper and packaging fragments, including collection, filtration and disposal timing.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-XS1800 |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-XS1800 with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Effective sweeping width1880mm
Sweeping width1880 mm: wide-coverage open-road sweeping; the model number must not be used to substitute 1800 mm.
Hopper180 L: influences route continuity and emptying frequency.
Theoretical sweeping coverage (calculated)22560㎡/h
Theoretical calculation speed12 km/h
Suitable debrisAssess leaves, grit, paper and ordinary particles by volume and density.
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Effective sweeping width | 1880mm | Theoretical calculation speed | 12 km/h |
| Theoretical sweeping coverage (calculated) | 22560㎡/h | Sweeping width | 1880 mm: wide-coverage open-road sweeping; the model number must not be used to substitute 1800 mm. |
| Hopper | 180 L: influences route continuity and emptying frequency. | Suitable debris | Assess leaves, grit, paper and ordinary particles by volume and density. |
| Ride-on operation | For operator-driven sweeping on longer routes; the driver must still observe road conditions. | Wide-coverage operation | More open roads are better able to accommodate wide sweeping coverage. |
| Access conditions | Check narrowest access, turning radius, columns, mixed vehicle traffic and parking. | Work organization | Check debris volumes, emptying points, dust control, gradients and work windows. |
How do these figures apply to your site?
Calculated as effective sweeping width × the website's standard theoretical speed of 12 km/h. Maximum travel speed remains a separate specification and is not used in this formula. The result is not actual or measured productivity.
Assess how coverage, collection, driving arrangements, dust control, emptying points and access affect actual work, rather than comparing numbers alone.
Structure and functions
How the systems on J-XS1800 work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check overall dimensions and turning space on open roads.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-XS1800 gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-XS1800?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-XS1800 suit the site, and when is another option appropriate?
Where J-XS1800 fits best
- Factory yards
- Logistics-park roads
- Open routes in larger estates
- Long routes with scattered debris
Compare other models
- Narrow roads, closely spaced columns or frequent turns
- Short fragmented routes or dense obstacles
- Wet waste, oily sludge or bulky debris
- Assess other configurations when a cab enclosure is required
Comparing related models
How does J-XS1800 compare with similar models?
To compare machines, consider road layout, debris load and turning room alongside sweeping width.
| Comparison criteria | Narrower-coverage option J-XS1550 → | Current modelJ-XS1800 → | Wider-coverage option J-XS1900Q → |
|---|---|---|---|
| Sweeping width | 1550mm | 1880mm | 1900mm |
| Hopper | 80L | 180L | Ask about this option when specifying the machine. |
| Water tank | 45L | Ask about this option when specifying the machine. | Ask about this option when specifying the machine. |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-XS1800?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-XS1800
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-XS1800 wide ride-on sweeper: selection and operating questions
Which factory routes suit J-XS1800?
Assess open factory roads, loading surroundings and parking areas. Plan passes with 1880 mm effective coverage and check gates, connections, turning and parking.
How should grit and packaging debris be swept?
Remove straps, long and large objects and coordinate forklift traffic. Trial brush gathering and feeding and record grit weight separately from packaging volume for disposal planning.
How can 1880 mm coverage benefit wide routes?
Use coverage to organise adjacent passes and avoid disordered overlap. Trial narrow connections separately and include turns, traffic and disposal in shift planning.
How should the 180 L hopper fit factory disposal?
Identify safe stopping and unloading points, then segment by debris volume, density and permitted load. Record disposal travel to coordinate collection with onward waste handling.
How should ordinary dust collection be assessed?
Check dust, filters, sealing and cleaning together and observe airborne dust and residue. Assess sticky, combustible or hazardous material separately.
How should after-shift care be organised?
Empty the hopper, inspect brush wear and entanglement after shutdown, service filters and check power, charging and parking. Pass fault records to the next shift.
How does it compare with J-XS1550 and J-XS1900Q?
Coverage is 1880, 1550 and 1900 mm respectively. Compare access first, then each model collection, driving and power configuration; similar names do not imply identical arrangements.
What helps Wanshenglong select a wide sweeper?
Share factory routes, loading schedules, bottlenecks and waste samples. Trial representative straights, turns and disposal travel to confirm configuration, training and consumable support.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-XS1800.
Phone consultation: 0755-25621811
Product enquiry
Describe your open-road conditions to assess J-XS1800
Provide road width, turning space, debris volumes, emptying points, gradients and daily routes.