01 Intended use
- Sweeping estate and factory roads
- Check the actual body configuration of this version against the available space. Confirm features from model documentation.
Jinjie road sweepers
Jinjie J-XS1900Q Ride-On Road Sweeper
The Jinjie J-XS1900Q road sweeper provides 1900 mm effective coverage for campus main roads, factory perimeters and public-space routes, supporting regular sweeping with its specified driving and collection configuration.
Wider coverage for continuous sweeping on longer routes.
Theoretical calculation speed:12 km/hTheoretical sweeping coverage (calculated):22800㎡/hWebsite theoretical comparison calculation; not actual productivity.
02 Key performance figures
- 1900 mm sweeping coverage
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls. Check the collection arrangement for the supplied version.
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Typical applications
3 sweeping applications for J-XS1900Q
Larger estate roads
View detailed analysis →1900 mm class open-road sweeping
For regular sweeping of wider estate main roads and longer routes, collecting leaves, paper, dust and ordinary light debris to reduce repeated manual passes.
Factory / logistics park / warehouse perimeters
View detailed analysis →Continuous factory-perimeter sweeping
For factory, logistics and warehouse perimeter roads. Confirm entrances, turns, mixed traffic and emptying arrangements before use.
Business estate / visitor attraction / campus perimeters
View detailed analysis →Long public-perimeter sweeping routes
For fixed routes in open public perimeter areas, organized by debris types and work windows.
Cleaning challenges
Common challenges on longer large-road routes
Route length, coverage, debris collection and access jointly affect continuous work with larger sweepers.
Long estate main roads, factory roads and yards can require repeated passes with manual methods or narrower equipment.
Scattered leaves, paper, grit and dust require route work organized around emptying points and work windows.
1900 mm class coverage is a candidate for open roads; check entrances, turns, gradients and mixed traffic first.
Site conditions, configuration and selection
How would J-XS1900Q work on your site?
Start with road clearance, turns, traffic and parking. Trial leaves, paper and grit and record collection, dust and disposal travel, then confirm driving, filtration, power and supplies for coordinated operation.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | Selecting J-XS1900Q |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-XS1900Q with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Effective sweeping width1900mm
Theoretical sweeping coverage (calculated)22800㎡/h
Theoretical calculation speed12 km/h
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Effective sweeping width | 1900mm | Theoretical calculation speed | 12 km/h |
| Theoretical sweeping coverage (calculated) | 22800㎡/h | ||
How do these figures apply to your site?
Calculated as effective sweeping width × the website's standard theoretical speed of 12 km/h. Maximum travel speed remains a separate specification and is not used in this formula. The result is not actual or measured productivity.
Assess how coverage, collection, driving arrangements, dust control, emptying points and access affect actual work, rather than comparing numbers alone.
Calculated from this model's effective sweeping width × the website theoretical speed of 12 km/h. For theoretical area comparison only, not actual or measured productivity.
Structure and functions
How the systems on J-XS1900Q work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check overall dimensions and turning space on the estate roads.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-XS1900Q gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-XS1900Q?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
When does J-XS1900Q suit the site, and when is another option appropriate?
Where J-XS1900Q fits best
- Larger estate roads
- Factory main roads
- Open yards
- 1900 mm class coverage requirements
- Ordinary dry-debris road sweeping
Compare other models
- Projects requiring confirmed hopper, tank or special-accessory details
- Narrow roads, low entrances, frequent turns or dense obstacles
- Wet sticky waste, oily sludge or bulky debris
- Compare J-XS2100Q separately where 2100 mm class coverage is needed
Comparing related models
How does J-XS1900Q compare with similar models?
The sweeping width of J-XS1950 is 1900 mm. Compare body dimensions, drive and equipment individually, even where widths match.
| Comparison criteria | Related configurations J-XS1800 → | Current modelJ-XS1900Q → | Related configurations J-XS1950 → |
|---|---|---|---|
| Sweeping width | 1880mm | 1900mm | 1900mm |
| Hopper | 180L | Ask about this option when specifying the machine. | 180L |
| Water tank | Ask about this option when specifying the machine. | Ask about this option when specifying the machine. | 80L |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-XS1900Q?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-XS1900Q
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-XS1900Q ride-on road sweeper: selection and operating questions
Which daily routes suit J-XS1900Q?
Assess loose debris on hard-surface campus roads, factory perimeters and public spaces. Plan passes using 1900 mm coverage and check body access, kerbs, turns and traffic.
How should leaves, paper and grit be handled?
Remove long, large and special materials first and trial ordinary mixed debris. Consider litter volume and grit weight and plan segmented disposal around collection conditions.
How should coverage fit complex junctions?
Use orderly passes on continuous routes and assess junctions, gates and parking separately. Measure body, brushes and turning space and coordinate people and vehicles.
How should road-dust control be assessed?
Check dust, filters, sealing and cleaning alongside specified suppression and water access. Observe airborne dust and residue and assess hazardous materials separately.
How should longer routes coordinate driving, charging and disposal?
Plan operators and handover, then divide routes around actual battery, collection and supplies. Time sweeping, disposal, filter care and waiting separately for practical shifts.
What are the maintenance priorities?
After shutdown, inspect brushes, empty collection areas and service filters as instructed. Check driving, brakes and charging connections and record model-specific parts for continuing care.
How should it be compared with the same-width J-XS1950?
Both list 1900 mm coverage, but compare body, turns, driving, power, collection and maintenance separately. Trial the same route and debris to assess suitability.
How can Wanshenglong support on-site handover?
Use road photos, dimensions, debris and shifts to discuss configuration and trials. Confirm driving, brushes, filtration, power, unloading, safe operation and consumables at delivery.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →Tell us about the roads, debris and daily rounds so we can check the suitability of J-XS1900Q.
Phone consultation: 0755-25621811
Product enquiry
Describe your 1900 mm class road requirements to assess J-XS1900Q
Provide road width, entrance height, debris types, emptying points, turning space and work windows.