01 Intended use
- Large estates and wide roads
- For ordinary dry litter across wider areas, allow time for transfers and disposal.
Jinjie road sweepers
Jinjie J-XS2100 Wide Ride-On Sweeper
The Jinjie J-XS2100 combines 2100 mm coverage and a 240 L hopper for large-campus main roads and open factory perimeters, supporting continuous routes and organised disposal.
02 Key performance figures
- 2100 mm sweeping width
- Observe collection, residual debris and dust on a representative section of your route.
03 Working configuration
- Ride-on controls and 240 L hopper
- Plan disposal around debris volume, weight and distance. Maintain the machine as instructed.
Start with your site
What would you like to clean?
Cleaning challenges
What needs to be planned together on a sweeping route?
Recurring litter
Leaf litter, paper and grit accumulate at different times and densities. Plan each section accordingly.
Clearance and mixed traffic
Narrow passages, turns and yielding take time. Measure the shift on the actual route.
Linking pickup and disposal
Waste volume, weight and distance to the disposal point determine when to empty the hopper. Plan this alongside maintenance.
Site conditions, configuration and selection
How would J-XS2100 work on your site?
Map main roads, connections, unloading and charging. Check the listed 2550 × 2100 × 2050 mm machine for access and height limits and trial straights and turns, coordinating collection, supplies, filtration and driving.
Residential and industrial estate roads
Clear road width, kerbs, leaf load and pedestrian hours
Factory and warehouse yards
Waste type, traffic, surface and distance to disposal
Car parks and connecting lanes
Gate height, narrowest section, columns and gradients
Campus and public roads
Pedestrian traffic, obstructions, level changes and disposal arrangements
Check access, debris and work patterns at the site when specifying the machine.
| Site type | Configuration and operating conditions to check | J-XS2100 selection advice |
|---|---|---|
| Residential and industrial estate roads | Clear road width, kerbs, leaf load and pedestrian hours | Check the footprint of J-XS2100 with the brushes deployed and plan the rounds for the debris load. |
| Factory and warehouse yards | Waste type, traffic, surface and distance to disposal | Separate sticky, entangling and special materials. Test collection and dust control on a representative stretch. |
| Car parks and connecting lanes | Gate height, narrowest section, columns and gradients | Check overall height, turning space and room to pass safely. Sweeping width alone cannot determine access. |
| Campus and public roads | Pedestrian traffic, obstructions, level changes and disposal arrangements | Choose a suitable time and arrange parking, disposal and maintenance before setting the route. |
Confirm selection against site measurements, the specified configuration and a representative trial.
Applications
Which road-cleaning tasks suit J-XS2100?
Compare site conditions, operating limits and trial requirements for three applications. The images illustrate those settings.
Estate-road route sweeping
Check route dimensions, debris and traffic conditions before selecting J-XS2100.
Review site suitability and operation →
Factory and warehouse yards
Check route dimensions, debris and traffic conditions before selecting J-XS2100.
Review site suitability and operation →
Campus and public roads
Check route dimensions, debris and traffic conditions before selecting J-XS2100.
Review site suitability and operation →Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Sweeping width2100mm
hopper capacity240L
Battery configuration48V 200Ah
Operating voltage48V
Working rateUp to 15000 m²/h
Overall dimensions (length × width × height)2550 × 2100 × 2050mm
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Sweeping width | 2100mm | Working rate | Up to 15000 m²/h |
| Water tank capacity | 180L | hopper capacity | 240L |
| Maximum travel speed | 12km/h | Main brush length | 790mm |
| Main brush diameter | 330mm | Side brush diameter | 600mm |
| Drive and electrical system | |||
| Battery configuration | 48V 200Ah | Operating voltage | 48V |
| Drive power | 2200W | Main brush power | 1200W |
| Vacuum motor power | 600W × 2 | ||
| Machine configuration | |||
| Overall dimensions (length × width × height) | 2550 × 2100 × 2050mm | Overall weight | 900kg |
| Product model | J-XS2100 | ||
Structure and functions
How the systems on J-XS2100 work together
Use the exterior view for operating and maintenance orientation. Consult component documentation for internal locations.
Look at the picture to understand the equipment.
Components and their functions
01 Machine and operator station
Check the machine footprint and turns on wide main roads.
02 Main brush
The main brush sweeps the floor. After shutdown, inspect it for wear and entanglement.
03 Side-brush collection
The side brush guides loose debris towards the sweeping path. Keep clearance from edges.
04 Debris collection
Empty according to waste volume, weight and disposal arrangements.
05 Filtration and dust suppression
Check media, seals and water use against the supplied configuration.
06 Drive and steering
The operator steers and yields to traffic. Maintain the power system according to the handover instructions.
Operating principle
How does J-XS2100 gather, sweep and collect debris?
This diagram explains the functions. Refer to the supplied instructions for installed parts, switching sequences and maintenance procedures.
Side-brush collection
The side brush guides suitable loose debris into the main brush path. Maintain safe kerb clearance.
Main-brush sweeping
The main brush sweeps and transfers debris. Brush condition, the surface and the material affect pickup.
Centralised collection
Plan disposal around the actual hopper load and distance to the emptying point.
Dust management and end-of-shift checks
Assess dust collection, filter cleaning and water use on site. Shut down for end-of-shift maintenance.
Filtration and dust management
How do you assess dust control on J-XS2100?
Assess filtration, collection, seals and maintenance together. A filter-area or motor rating alone cannot predict dust at the site.
Identify the material
Identify wet, sticky, hazardous, combustible or toxic material before sweeping. Special dusts require a separate method and suitable equipment.
Filtration and collection components
Identify the filter media, seals and cleaning method. Use spray only where the configuration and surface permit, and maintain the filter as specified.
Observe a representative section of road
During a trial, record dust, residue, pickup and maintenance frequency. Stop safely if anything appears abnormal. Confirm washability before rinsing the filter.
Suitable / unsuitable for boundary
Does J-XS2100 suit your site?
Where J-XS2100 fits best
Compare other models
Comparing related models
How does J-XS2100 compare with similar models?
The sweeping width of J-XS1950 is 1900 mm. Compare body dimensions, drive and equipment individually, even where widths match.
| Comparison criteria | Related configurations J-XS1950 → | Current modelJ-XS2100 → | Options with equivalent sweeping width J-XS2100Q → |
|---|---|---|---|
| Sweeping width | 1900mm | 2100mm | 2100mm |
| Hopper | 180L | 240L | Ask about this option when specifying the machine. |
| Water tank | 80L | 180L | Ask about this option when specifying the machine. |
| Selection checks | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. | Check clear road width, debris, turning room and supply points. |
Operating cost
What does it cost to operate J-XS2100?
Record sweeping, collection and disposal over the same period and to the same standard. Measure actual output on site.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Routine maintenance
Six checks before and after using J-XS2100
Working components
Shut down safely before checking brushes for wear and entanglement. Keep hands clear of moving parts.
Hopper and disposal
Empty before reaching volume or weight limits. Hopper capacity alone does not specify safe payload.
Dust collection components
Check installed parts for dust loading, damaged media and leaks. Wash only media approved for washing.
Power and charging
Check the supplied batteries, charger and charging conditions. Have a qualified technician investigate overheating, damage or electrical faults.
Working conditions
Record changes in level, obstacles, traffic and difficult sections. Reassess the route when conditions change.
Driving and parking
Check drive, braking and parking as instructed. Stop if you hear abnormal noise or feel unexpected resistance.
Replace according to the manual, observed wear and duty. Supply the model, version and original part details when ordering.
— FAQ
Jinjie J-XS2100 wide ride-on sweeper: selection and operating questions
Which large sites suit J-XS2100?
Assess large campuses and factory perimeters with wide continuous routes. Plan passes with 2100 mm coverage and collection with the 240 L hopper, checking connections, gates, turns and height limits.
How can wide-road sweeping be organised?
Divide main roads, branches and edges and define travel direction and disposal points. Schedule loading or busy areas separately to coordinate coverage with traffic.
How should the 240 L hopper serve heavier debris routes?
Trial litter volume and grit weight and set disposal stops within permitted loads. Coordinate safe unloading and onward waste handling with the complete route.
How should ordinary grit and packaging be handled?
Remove straps, large and sticky material first, then assess brush feeding and collection. Check filtration, sealing and cleaning with actual dust to plan configuration and care.
How should power and supplies fit longer shifts?
Confirm actual battery and charger requirements and include disposal, water, filter care and waiting. Record completion time and energy use on the intended route to schedule handover and supplies.
What should be checked after daily work?
Dispose of waste, inspect brushes after shutdown, service filters and check seals and power. Record faults and consumable condition so the next shift can assess readiness.
How does it compare with J-XS1950 and J-XS2100Q?
Coverage is 2100, 1900 and 2100 mm. Equal width still requires separate checks of body, driving, power and collection. A narrower machine may better fit connections.
How can Wanshenglong support a campus plan?
Share main and branch routes, bottlenecks, debris distribution and shifts to agree trials and configuration. Handover confirms driving, cleaning, unloading and parts care for the operating team.
Delivery and after-sales service
Operating and maintaining the machine after delivery
The agreed service terms specify scope, charges and timing.
01 Delivery inspection
Before handover, check the equipment, accessories and configuration against the conditions on site.
View service support →02 Operator training
Training covers driving or task operation, cleaning and safe shutdown for the equipment supplied.
View service support →03 Operator guidance
Describe the surface, debris and schedule when discussing an operating issue.
View service support →04 Parts supply
Identify spares by the machine model, version and original part.
View service support →05 On-site repairs
Confirm service area, charges and attendance arrangements in advance.
View service support →06 Scheduled on-site maintenance
Agree on maintenance arrangements based on usage, location and condition.
View service support →
Tell us about the roads, debris and daily rounds so we can check the suitability of J-XS2100.
Phone consultation: 0755-25621811
Product enquiry
Unsure whether J-XS2100 suits your site?
Describe the application, site conditions and frequency for selection advice.