CN EN
Home > Products > Municipal cleaning equipment > Jinjie JC-500S Three-Wheel Pressure-Washing Vehicle
Jinjie JC-500S three-wheel vehicle performing road washing
Video and application reference

JC-500S three-wheel pressure-washing vehicle operation video

View road, ground and public-facility washing demonstrations; choose configuration around refill points, routes and site conditions.

JC-500S washing operation reference

Video shows mobility and washing method; confirm working-end attachments and delivered version in the order.

Cleaning challenges

Common municipal equipment selection challenges

Dragging hoses by hand is tiring

Scattered residential/perimeter points make repeated manual hose movement inconvenient.

Smaller roads may not admit large vehicles

Large vehicles may be unsuitable for narrow roads, frequent turns or small stopping spaces.

Temporary dirty spots need prompt treatment

Entrances, corners and waste points need mobile washing access.

Typical applications

Which cleaning sites suit JC-500S?

JC-500S residential side roads
Residential side roads

Washing hard ground on residential side roads

Operators wash sections with a handheld lance, coordinating traffic, refilling and drainage.

JC-500S estate roads
Estate roads

Washing local mud on estate roads

Clean ordinary ground mud by estate-road sections; determine method for actual contamination.

JC-500S Property surroundings
Property surroundings

Washing paved property perimeter plazas

Wash paved plazas and edges in sections, keeping pedestrians out of the isolated zone.

Assess the task

Which task does this equipment best address?

Choose municipal equipment by washing, water sweeping, dust suppression or waste transport; different machines are not a simple ranking.

Washing smaller roads

For washing residential/estate side roads and property perimeters.

The focus is mobile access combined with a 500 L tank.

Handling scattered cleaning points

Rounds among entrances, waste points and corners.

Reduce manual hose dragging and long-distance pushing.

Routine dust-suppression assistance

For loose dust and light soil on hard ground.

Focused on loose dust/light soil on hard ground; confirm configuration for the actual task before purchase.

TECHNICAL SPECIFICATIONS

Technical specifications

Start with the key features, then check the full specification.

Key parameters, view at a glance

FlowConfirm against the tank, nozzles and washing stations.
PressureMobile pressure-washing configuration; confirm the pump set.
High-pressure hose configurationConsider a hand-held wash hose with a quick-stow arrangement.

Detailed equipment specifications

Key operating figures
PressureMobile pressure-washing configuration; confirm the pump set.FlowConfirm against the tank, nozzles and washing stations.
High-pressure hose configurationConsider a hand-held wash hose with a quick-stow arrangement.
How to interpret the figures

Look beyond one figure: tank/bin arrangement, vehicle platform, routes, refilling and access determine suitability.

Road width, access, turning and parking directly affect practical usability.

For washing, check refill points and route length; for transport, check bin locations and distance to the receiving point.

Confirm road/aisle width, route length, daily frequency, refill/bin points, operating times and main task before selection.

Suitable / unsuitable for boundary

When does JC-500S fit, and when is another approach needed?

Candidate applications

  • Residential/estate side roads and property perimeters
  • Scattered points needing three-wheel access
  • Primarily washing and dust suppression
  • Routine work with established refill points

Assess a different solution

  • Continuous washing on long, large roads
  • Need for water sweeping or waste collection
  • Complex road traffic management
  • Need for a large four-wheel platform and larger tank
Compare alternative models

Compare alternatives for different site conditions

Compare JC-500S for smaller roads and scattered points, JC-500JY for water-assisted sweeping and loose dust, and JC-1800 for long routes needing more water.

ItemJC-1800JC-500SJC-500JYJQ-8
Main tasksContinuous washing on large roadsMobile washing on smaller roadsWater-assisted sweeping / loose-dust treatmentConsolidated bin transport
Currently confirmed core configuration1800 L tank / four-wheel platform500 L tank / three-wheel platform500 L tank / three-wheel water sweepingEight bin positions / four-wheel platform
Candidate applicationsLarge roads, long routes and outdoor washingResidential side roads, estate roads and property exteriorsLoose dust, water-assisted sweeping and edge washingMulti-point bin transport in communities, estates and scenic sites
Checks before purchaseRoute length, refill points and road widthScattered points, refill points and access conditionsDust conditions, drainage and refill pointsBin count, receiving point, access and turning

Choose by task, not model digits

Washing, water-assisted sweeping and waste transport are different tasks; the four models are not a simple capability ranking.

Specifying equipment for purchase

Before ordering, confirm the vehicle configuration against the route, payload and refill points.

FAQ

JC-500S Purchasing questions

Which tasks suit JC-500S?

Positioned as a three-wheel pressure-washing vehicle for smaller roads and scattered points.

What does a 500 L tank mean?

Use 500 L to assess washing range between refills; actual scheduling depends on route length and refill points.

Which property tasks suit it?

Mobile washing of residential side roads, estate roads, property exteriors, waste points and corners.

Product enquiry

Tell us the route and task to assess JC-500S

Provide road/aisle width, route length, daily frequency, refill/bin points, gradients, turning space, times and main task.