Property management
- Typical site
- Underground parking facilities
- Why it fits
- Ride-on operation can maintain continuous car-park routes; ramps require site assessment.
Jinjie Floor Scrubber
Jinjie J-85BH Rear-Wheel-Drive Ride-On Floor Scrubber
Jinjie J-85BH after-wheel driven floor scrubber, designed for longer cleaning routes in large and medium-sized continuous hard surfaces, with 850 mm brushing coverage combined with a recovery system; the after-wheel driven configuration and dual water motor setup should be independently verified according to the machine's documentation.
Established in 2004 | Site-trial discussion | Service support across China
Theoretical calculation speed:10 km/hTheoretical cleaning coverage (calculated)8500㎡/hWebsite theoretical comparison calculation; not actual productivity.
Factories / warehouses
- Typical site
- Factories / warehouses
- Why it fits
- Coordinate factory and warehouse cleaning with goods movement. Check floor materials, contamination and transfer routes first.
Commercial shared areas
- Typical site
- Shopping centres / shared areas
- Why it fits
- Account for pedestrian access and cleaning windows in shopping-centre shared areas. Check turning and obstacle areas before purchase.
Video and application reference
J-85BH video reference
View the website playback version for operation reference, while assessing selection against the actual task and conditions.
J-85BH operation reference
The video helps explain appearance and operation; it does not replace site verification.
Start with your site
What would you like to clean?
Site conditions, configuration and selection
How would J-85BH work on your site?
Trial long aisles, turns and stopping points, recording drive operation, recovery and replenishment. Twin suction motors do not establish double recovery performance. Compare the J-85BF on the same surface, soil and route before judging staffing and shift suitability.
Factory hard floors
Floor surface, dirt properties, obstacles, and operating hours
Warehouse and continuous passage
Clearance between shelves, connection sections, corners, and pedestrian and vehicle traffic
Property and parking areas
column grid, slope, drainage, and ground condition.
Commercial shared areas
Pedestrian hours, storage, charging, and cleaning frequency.
| Site | Configuration and operating conditions to check | J-85BH recommendation |
|---|---|---|
| Factory hard floors | Floor surface, dirt properties, obstacles, and operating hours | First, separate the particles and special contaminants, then check if the machine's brush washing and recycling are compatible. |
| Warehouse and continuous passage | Clearance between shelves, connection sections, corners, and pedestrian and vehicle traffic | Include the entire machine and the water-absorbing components in the actual measurement, without using the cleaning width as a substitute for the passage conditions. |
| Property and parking areas | column grid, slope, drainage, and ground condition. | Arrange the route and water supply and drainage according to the site conditions; the slope capability must be confirmed based on the machine's data. |
| Commercial shared areas | Pedestrian hours, storage, charging, and cleaning frequency. | First confirm the parking and supply conditions as well as maintenance requirements, then organize shifts according to actual cleaning needs. |
The above is a reference for on-site judgment, and no commitment is made that all similar sites are applicable.
Typical applications
These medium/large continuous-route applications:J-85BHA closer fit
Underground parking facilities
View detailed analysis →Main underground-car-park aisles
Where lanes and main aisles are long and need continuous scrubbing and water pickup, rear-wheel drive is worth assessing.
Factories / warehouses
View detailed analysis →Continuous factory and warehouse routes
Where hard-floor areas are large, routes are fairly fixed and reducing walking is important, organise the task around continuous ride-on operation.
Shopping centres / shared areas
View detailed analysis →Continuous hard-floor cleaning in shopping centres
Organise shopping-centre scrubbing and water pickup by zone during quieter periods. Confirm access, turns and floor conditions first.
Cleaning challenges
Why consider rear-wheel drive for longer routes or changes in gradient?
J-85BH selection is not simply about a larger machine: it concerns rear-wheel drive, twin vacuum motors and medium-to-large continuous routes. Check ramps, slippery sections, loaded travel and filling/draining facilities.
Manual mopping or repeated passes with a small machine across medium/large sites can cause frequent interruptions within a shift.
Rear-wheel drive is relevant to route assessment, but does not replace site checks of gradients, slippery sections and loaded conditions.
Twin vacuum motors and the squeegee recover dirty water after scrubbing to help prepare the floor for reopening.
Technical specifications
Review day-to-day configuration first. Expand the full specifications for more detail.
Key parameters, view at a glance
Cleaning width850mm
Fresh water tank / Sewage water tank110L / 115L
Runtime reference4.5–6h
Battery4 × 6V × 200Ah
Theoretical cleaning coverage (calculated)8500㎡/h
Machine dimensions1505 × 905 × 1270mm
Full specifications for ViewExpand or collapse
| Key operating figures | |||
|---|---|---|---|
| Cleaning width | 850mm | Squeegee width | 1100mm |
| Clean water tank | 110L | sewage tank | 115L |
| Runtime reference | 4.5–6h | Theoretical cleaning coverage (calculated) | 8500㎡/h |
| Theoretical calculation speed | 10 km/h | ||
| Drive and electrical system | |||
| Operating voltage | 24V | Battery | 4 × 6V × 200Ah |
| Travel motor | 1200W | Brush motor | 2 × 550W |
| Recovery motor | 550W × 2 | ||
| Machine configuration | |||
| Drive arrangement | Rear-wheel drive | Machine dimensions | 1505 × 905 × 1270mm |
| Machine weight | 230kg | Product model | J-85BH |
| Work method | Ride-on | ||
How do these figures apply to your site?
Note: website theoretical coverage for ride-on scrubber-dryers is calculated as cleaning width × the standard theoretical calculation speed of 10 km/h. It is for theoretical area comparisons, not actual productivity or the machine's maximum travel speed.
The cleaning width affects the coverage of a single pass, and the relationship between the fresh water tank and the dirty water tank affects the convenience of continuous operation. The battery, drive, and water suction system affect the daily floor scrubbing schedule.
Look at the picture to understand the equipment.
Components and their functions
01 body and water tank
The fresh water supply and the wastewater recovery should be managed separately, and the housing should be cleaned promptly after use.
02 Driving and Drive
This machine uses rear-wheel drive, and the driving operation is carried out according to the training of this machine and the on-site conditions.
03 brushing configuration
The bottom brush washing mechanism cleans the floor. The brush or cleaning pad is selected based on the floor surface and pollution level.
04 water recovery
The squeegee works with wastewater recovery; if there are residual water marks, first check the rubber seals, gaskets, and piping.
05 Power and Maintenance
Charge and maintenance are carried out according to the actual battery configuration, not based on theoretical efficiency for range.
06 Route and parking
Check the overall dimensions of the machine against the channel, corners, and storage location, and retain a safety margin.
Candidate applications / alternatives
What sites suit J-85BH, and when should other models be compared?
Where J-85BH fits best
- Continuous cleaning of medium/large hard floors
- Underground car parks, warehouses and large shared areas
- Longer routes requiring ride-on operation
- Sites with some gradient changes, subject to site confirmation
Compare other models
- Narrow doorways or closely spaced columns
- Insufficient turning space
- Short, fragmented routes
- Loose debris has not been pre-cleared
- Ramp sections require site confirmation
Compare related models
How should J-85BH be compared with other ride-on scrubber-dryers?
Compare medium/large ride-ons by drive arrangement, routes, gradient changes, tanks and water-pickup configuration. Do not give J-85BH and J-85BF the same positioning.
| Item |  J-66BF → |  J-85BF → | J-85BH → |  J-D9BF → |
|---|---|---|---|---|
| Cleaning width | 660mm | 850mm | 850mm | 860mm |
| Squeegee width | 800mm | 1100mm | 1100mm | 1100mm |
| Clean water tank | 90L | 110L | 110L | 120L |
| sewage tank | 95L | 115L | 115L | 140L |
| Operating voltage | 24V | 24V | 24V | 24V |
| Battery configuration | 2 × 12V / 100Ah | 4 × 6V × 200Ah | 4 × 6V × 200Ah | 4 × 6V × 200Ah |
| Indicative operating time | 3–4h (reference value) | 4.5–6h | 4.5–6h | 4.5–5h |
| Overall dimensions | 1250 × 830 × 1000mm | 1505 × 905 × 1270mm | 1505 × 905 × 1270mm | 1600 × 900 × 1320mm |
| Overall weight | 110 kg (excluding batteries) | 230kg | 230kg | 375kg |
| Task scale | Dual brush drive | Medium/large front-wheel drive | Medium/large rear-wheel drive | Larger continuous routes |
| Drive / reasons to compare | Twin-brush coverage for medium-sized areas | Front-wheel drive; level routes | 1200 W rear-wheel drive; assess route suitability | Larger tanks and continuous routes |
Parameter comparison with each model's 'View complete technical specifications'. Working time is a reference value, actual duration varies with battery, load, and on-site operating conditions; specific configuration is checked against delivery documents.
When should J-85BH be considered?
J-85BH is worth comparing where routes are long and ramps, loaded transfers or drive suitability need assessment.
When should J-85BF be considered?
For mainly level medium/large routes, first compare front-wheel-drive options.
How should ramp sections be handled?
Assess gradients, slippery sections, loads, turning and site safety arrangements together; no universal capability is promised.
Operating cost
What does it cost to operate J-85BH?
Record the cleaning, scrubbing, and recovery according to the same cleaning requirements and cycle, without taking theoretical efficiency directly as on-site output.
Manual sweeping
Labour cost = crew size × hours per person × hourly rate. Record preparation, cleaning, transfers and close-down separately.
Machine option
Include operation or supervision, energy, consumables, disposal and maintenance. Allocate equipment and battery costs over a suitable service period.
On-site comparison
Record daily operating hours, routes, garbage or contaminants, and supply and shutdown times; under the same conditions, compare, and do not commit to any savings ratio that has not been calculated.
Service support
Operating and maintaining the machine after delivery
Delivery inspection
Check the equipment and configuration list together before delivery.
Understand service arrangements →Operator training
Communicate startup, brushing, replenishment of water, and daily cleaning.
Understand service arrangements →Usage guidance
In case of operational issues, communicate with the model and usage conditions.
Understand service arrangements →Parts supply
Check the brush roll, rubber strip, and other parts against the model.
Understand service arrangements →On-site fault repair
Service scope, costs, and arrival arrangements need to be confirmed first.
Understand service arrangements →Scheduled on-site maintenance
Coordinate maintenance plans with the frequency of use and the location.
Understand service arrangements →— FAQ
Choosing and using the J-85BH: frequently asked questions
What matters when selecting rear-drive J-85BH?
Focus on driving control, turns, stopping and recovery on longer routes. Rear drive does not automatically suit every ramp or wet surface; follow instructions and verify actual site conditions.
How should ramps and route surfaces be checked for rear-drive J-85BH?
Check ramps, wet surfaces, turns, braking and pedestrian access against the permitted conditions. The 1200 W rear-drive rating does not establish slope or traction capability; speed used for theoretical productivity is not public-area driving advice.
How should J-85BH's 850 mm width and tank configuration inform route planning?
The current dual water tanks are 110 L/115 L. First, plan the route and refill points, then record the water supply, waste discharge, and round-trip time. The cleaning coverage and capacity cannot directly provide the total amount completed during the shift, and the edge and corner finishing also needs to be scheduled.
How should J-85BH runtime and cleaning shifts be planned?
Check the corresponding battery, actual load and condition, and record operation, replenishment, charging and cleanup. Distinguish powered-on time from effective scrubbing rather than promising identical runtime across projects.
How should suction motor configuration be judged against actual ride-on recovery performance?
Verify the model’s suction motor configuration, then inspect water residue on straight runs, turns and joints under the same task. Squeegee condition, blade wear, hose seals and flooring all affect recovery. Twin motors or summed power do not directly quantify results.
How should rear-drive J-85BH and front-drive J-85BF scrubbers be compared?
Check J-85BH rear drive and J-85BF front drive, controls, recovery configuration and delivery lists separately, then trial turns, parking and recovery on the same route. Similar widths or tanks do not make specifications interchangeable; keep model-specific trial records and images.
How should J-85BH recovery faults be checked and reported safely?
Shut down safely and perform only permitted checks of tanks, blades, recovery hose and seals. Record timing, noise, water-residue locations and photos for service assessment. Do not dismantle energized suction motors.
What operating conditions help Wanshenglong specify J-85BH?
Provide route lengths, turns, pedestrians, surfaces, soil and water points to Wanshenglong. Trials, training, parts and on-site arrangements should match the delivered version and service agreement.
Discuss the floor, routes, and daily cleaning schedule, and together see if J-85BH is suitable.
Phone consultation: 0755-25621811
Product enquiry
Tell us about your site so we can assess whether J-85BH fits
Provide area, aisle width, floor material, ramp information, daily cleaning frequency and any rear-wheel-drive requirement so we can assess J-85BH suitability.