Scrubber-Dryer
For scrubbing, water recovery and routine cleaning of hard floors.
Browse floor scrubbersProduct centre: scrubbers, sweepers, pressure washers, pipe jetters, commercial cleaning, industrial vacuums, municipal equipment, parts and consumables
Cleaning equipment catalogue
Select equipment by site and task
Start with scrubbing, sweeping, pressure washing or pipe jetting, then narrow models by area, flooring, contamination, frequency and power.
Four core tasksSubcategory entriesFull product catalogueSite-based selection advice
Manufacturing and engineering capabilities
In-house production and coordinated hardware/software design support the product range
The source describes in-house assembly, commissioning and factory tests, supported by mechanical, electrical, controls and application-software teams for standard selection and custom engineering.
In-house factoryProduction, assembly and quality control
Machine testingCommissioning, verification and delivery checks
Hardware and software designCoordinated mechanical, electrical, controls and software design
Nationwide serviceTrials, training, parts and after-sales support
Product categories
Select the equipment type before comparing models.
Task-based entries explain differences between scrubbing, sweeping, washing, jetting and commercial equipment before linking the corresponding series.
High-Pressure Washer
For deep cleaning of equipment, vehicles, floors and heavy grease.
Browse pressure washers
Drain jetter
For property drainage, municipal networks and industrial pipe cleaning and unblocking.
Browse drain cleaners
Commercial cleaning equipment
For upholstery cleaning, vacuuming, water pickup, drying and floor care in hotels, restaurants, entertainment venues, offices and cleaning contracts.
Browse commercial-cleaning equipment
Industrial vacuum cleaner
Select for dust, debris, liquids and collection requirements.
Explore this series →
Municipal cleaning equipment
Road washing, waste transport and grounds maintenance.
Explore this series →
Custom design and production
Configure a system around the cleaning task, power and workstation.
Explore this series →
Parts and consumables
Match brushes, squeegees and maintenance parts to your model.
Explore this series →
Cleaning chemicals
Choose cleaning products for the soil, surface and application.
Explore this series →
Selection recommendations
Narrow selection by site scale and cleaning tasks.
Factory, property, contractor and municipal duties differ. Assess area, aisles, flooring, soils and delivery needs before selecting equipment and consumables.
Confirm aisle width, lift dimensions, turning space and daily working area.
Confirm floor material, ramps, grease, forklift routes and continuous operating time.
Confirm available power first, then compare pressure, flow and drainage requirements.
Choose pressure/flow by diameter, length, blockage, water and mobility.
Product levels
View all models by series
Explore series by purpose and model differences, with images, specifications, videos and applications available for site comparison.
1F
Scrubber series
Walk-behind, ride-on and autonomous scrubbers are selected by area and use conditions for garages, factories, retail/hospitals and estates.
Underground parking garages
Factory workshop
Retail and hospitals
Property estates
View scrubber series
J-D3C
Jinjie J-D3C walk-behind scrubber has a 460 mm cleaning width, 720 mm squeegee and theoretical efficiency of 2,000 m²/h for routine floor scrubbing and wastewater recovery in hospitals, schools, shops, offices, property public areas and narrow factory aisles
- Equipment category：Scrubber-Dryer
- Operation: walk-behind
- Control system: 48 V
J-D3L
Jinjie J-D3L walk-behind scrubber has a theoretical cleaning rate of about 2,500 m²/h and about 3–4 hours of continuous operation for routine scrubbing and wastewater recovery in small shopping centres, supermarkets, workshops, warehouse aisles and property public areas
- Cleaning width：510mm
- Squeegee width：780mm
- Clean-water capacity: 50 L
J-D5R
A single-disc ride-on scrubber for routine cleaning in shops, properties and warehouse aisles. Check clearance, turning space, water supply and drainage on the route.
- Stated cleaning rate: 3,200 m²/h
- Cleaning width: 530 mm
- Solution tank: 90 L
J-D6SL
Assess for garages, warehouses, factory main aisles, retail back-of-house and medium/large continuous floor areas.
- Equipment category：Scrubber-Dryer
- Work method：Ride-on
- Cleaning width：710mm
J-D7SL
For continuous cleaning of large floors, with working coverage and operator comfort in mind
- Product type：Ride-On Scrubber-Dryer
- Cleaning width：710mm
- Clean-water tank：70L
J-D9R
Twin brushes and two large tanks suit longer runs on open factory and warehouse floors. Check turning space, access and the distance to water and drainage.
- Stated cleaning rate: 5,500 m²/h
- Cleaning width：860mm
- Solution tank: 140 L
J-D9BF
860 mm front-wheel-drive medium/large ride-on scrubber; confirm specifications against the model's approved records.
- Product type：Ride-On Scrubber-Dryer
- Cleaning width：860mm
- Squeegee width：1100mm
J-D9BH
An 860 mm rear-wheel-drive ride-on scrubber for routine cleaning in factories, warehouses and large garages.
- Product type：Ride-On Scrubber-Dryer
- Cleaning width：860mm
- Squeegee width：1100mm
2F
Sweeper series
Walk-behind, ride-on, large and autonomous sweepers are selected by road area, debris, dust and conditions for estates, factories, municipalities and scenic sites.
Property estates
Factory roads
Municipal sanitation
Autonomous route sweeping
View sweeper series
J-XS1300
Compact ride-on sweeper with 1300mm sweeping width for routine property roads, parking areas, factory aisles and commercial surroundings.
- Sweeping width：1300mm
- Side-brush dimensions: 500mm × 2
- Main-brush dimensions: 530mm × 1
J-XS1460
For small and medium outdoor property estates, factory roads, commercial perimeters, campuses and visitor areas.
- Sweeping width：1460mm
- Work output: MAX 10150 m²/h
- Clean-water tank：60L
J-XS1500
For frequent rounds in medium/large outdoor property estates, factory roads, campuses and visitor areas.
- Battery configuration: Chaowei / Tianneng 48V 100Ah
- Operating voltage: 48V
- Sweeping width：1500mm
J-XS1950
Enclosed-cab ride-on sweeper for property roads, factory yards and warehouse sites. Current source lists 1900mm sweeping width, 13,300m²/h theoretical coverage, 48V80/100Ah battery, 45L water tank and 150L hopper; existing fact checks remain separate.
- Battery configuration: 48V 100Ah
- Operating voltage: 48V
- Sweeping width：1900mm
J-XS2100
2100 mm sweeping width, theoretical 15000 m²/h, 48 V 100/150/200 Ah batteries, 180 L water tank and 240 L hopper; assess for continuous routes in large parks, factories and property exteriors.
- Battery configuration: 48V 200Ah
- Operating voltage: 48V
- Sweeping width：2100mm
J-XS1250
Common estate/factory-road model combining sweeping and dust pickup.
- Equipment category：Road sweepers
- Work method：Ride-on
- Sweeping width：1250mm
J-XS1450
Assess for industrial/property/school roads, parking and factory exteriors.
- Equipment category：Road sweepers
- Work method：Ride-on
- Sweeping width：1450mm
J-XS1800
Assess for large parks, factory exteriors, logistics, municipal secondary roads and outdoor parking.
- Equipment category：Road sweepers
- Work method：Enclosed-cab ride-on
- Sweeping width：1880mm
AI
Autonomous cleaning equipment
Compare autonomous scrubbing and sweeping by route stability, obstacles, work windows, water services, waste and manual takeover requirements.
Autonomous scrubbingAutonomous sweepingScheduled cleaning roundsHuman–machine coordination
View autonomous cleaning equipment
CC1
Combined sweeping, scrubbing, recovery and pushing for indoor floors in malls, hospitals, hotels, offices, schools, food service and transport facilities.
- Product category：Four-in-one intelligent cleaning robot
- Main functions：Sweeping, scrubbing, vacuuming and dust mopping
- Dimensions: 663 × 626 × 667 mm
Allybot-C2
Combines scrubbing, vacuuming and dust mopping for indoor commercial spaces such as offices, hospitals, shopping centres, hotels, schools, restaurants, gyms and transport buildings, subject to site conditions.
- Product category：Commercial intelligent cleaning robot
- Main functions：Scrubbing, vacuuming and dust mopping
- Dimensions: 503 × 503 × 629 mm
J-W70
An autonomous scrubber-dryer for hotel lobbies, offices, shopping-centre passages, hospitals, schools, transport hubs, exhibition halls and defined factory aisles. Mapping, route planning and active obstacle avoidance support repetitive floor tasks, subject to deployment checks.
- Equipment category: autonomous floor scrubbers
- Cleaning width：510mm
- Squeegee width：810mm
MT1
For factories, logistics warehouses, underground parking, transport hubs and large commercial areas, moving from fixed-route sweeping toward waste-distribution-based intelligent rounds.
- Category: AI autonomous sweeper
- Main functions: sweeping, vacuuming and AI route cleaning
- Dimensions: approximately 840 × 600 × 700 mm
J-S130
An autonomous sweeper for defined industrial-estate, property, logistics, commercial-perimeter and garage routes, with mapping, obstacle avoidance, return charging and task management, subject to deployment checks.
- Equipment category：Autonomous Road Sweeper
- Operation: autonomous patrol / Full-area cleaning / Priority-zone cleaning
- Sweeping width：1300mm
4F
Pressure-washer range
Cold-water, hot-water, explosion-protected and ultra-high-pressure equipment options are selected by target, soil and pressure needs for industrial equipment, vehicle facilities, properties and pipe scale. Specific suitability requires model confirmation.
Industrial equipment
Vehicle depots
Property washing
Pipe descaling
View pressure-washer series
J-1612D
Assess 220 V availability for courtyards, cars, property floors, shopfronts, small outdoor areas, steps, walls and moss, with material trials.
- Equipment category：High-Pressure Washer
- Operation: electric pressure washing
- Working pressure: 160bar（16MPa）
J-2815C
Assess for outdoor equipment, road edges, engineering vehicles, farms, property exteriors and temporary work without fixed power.
- Equipment category：High-Pressure Washer
- Work method：Petrol power
- Working pressure: 280bar（28MPa）
J-5015D
Industrial pressure-washer design/production for equipment, moulds and heavily contaminated workstations.
- Model role: industrial pressure-washing system
- Typical sites: equipment descaling, moulds, heavy oil and fixed workstations
- Before ordering: confirm object, material, cycle time, pressure, flow, utilities and protection.
J-2815H
Assess for outdoor property, municipal, factory and engineering washing tasks.
- Equipment category：High-Pressure Washer
- Work method：Petrol power
- Maximum pressure：280bar（28MPa）
J-2515D
Assess 380 V factory equipment, oily floors, workshop exteriors, vehicles and heavier property soils.
- Equipment category：High-Pressure Washer
- Operation: electric pressure washing
- Maximum pressure: 300 “kilograms” (source wording; unit unverified)
J-2521D
Assess 380 V supply for grit-heavy floor, equipment and vehicle washing requiring greater dirt transport.
- Equipment category：High-Pressure Washer
- Operation: electric pressure washing
- Maximum pressure: 300 “kilograms” (source wording; unit unverified)
J-3515D
Assess 380 V industrial conditions for adherent oil, housings, concrete, engineering vehicles and local heavy deposits.
- Equipment category：High-Pressure Washer
- Operation: electric pressure washing
- Maximum pressure: 400 “kilograms” (source wording; unit unverified)
J-3522D
Jinjie J-3522D combines a source-stated 350 "kg" pressure class with 22 L/min flow for cleaning contractors handling continuous heavy-soil washing of large factories, exteriors, equipment refurbishment and construction vehicles. The pressure unit requires verification.
- Equipment category：High-Pressure Washer
- Pressure：Normal pressure 350bar（35MPa）
- Flow：Flow 22l/min
5F
Industrial vacuum series
Select wet/dry, explosion-protected, high-power and industrial extraction options by dust, volume and duty for production, machining, warehouses and construction. Verify the specific protected configuration.
Production workshop
Machining
Warehouse logistics
Construction
View industrial vacuum series
JGY-80P
Battery industrial vacuums support rounds around workshops, warehouses and equipment without fixed sockets, emphasizing mobility.
- Power supply: 24 V
- Rated power: 1,500 W
- Airflow：3000m³/h
JGY-2078SA
Wet/dry vacuum for offices, property services and routine teams, emphasizing lower-noise use, light mobility and ordinary dust pickup.
- Power supply: 220 V
- Rated power: 3,600 W
- Motor configuration: 3 × 1,200 W independently controlled motors
JGY-3070
Dust/chip industrial vacuums serve ordinary workshops and warehouses; assess capacity, filtration and stable continuous suction.
- Power supply: 220 V
- Rated power: 3,000 W
- Motor configuration: 3 × 1,000 W vacuum motors
JGY-3078P
For metalworking/metal shops with iron chips, dust and wet/dry mixed cleanup.
- Power supply: 220 V
- Rated power: 3,600 W
- Motor configuration: 3 × 1,200 W independently controlled motors
JGY-3078A
Assess reinforced industrial vacuums for metalworking, packaging and heavier dust, focusing on suction, airflow and filter maintenance.
- Model role: general factory wet/dry vacuum
- Typical sites: workshops, warehouses, repair areas and equipment surroundings
- Before ordering: confirm wet/dry proportions, movement, container capacity, hose diameter and filter maintenance.
JGY-3610P
For dust recovery in textile, packaging and light-industry workshops
- Model role: textile and light airborne-dust vacuum
- Typical sites: textile, clothing, packaging and light-industrial workshops
- Materials: lint, fibres, cotton dust, thread ends and lightweight debris
JGY80-40
Assess higher-power stainless industrial vacuums for production dust and solid waste, focusing on capacity and duty requirements.
- Power supply: 380 V
- Rated power: 4.0 kW
- Airflow：318m³/h
JGY100-75
75 L-class industrial vacuum for assessed large workshops, warehouses and solid-waste loads, with less frequent emptying as a potential benefit.
- Power supply: 380 V
- Rated power: 7.5 kW
- Airflow：700m³/h
6F
Drain-cleaner range
Electric, petrol and pressure-water drain equipment is selected by diameter, blockage and environment for property, municipal, food-service and industrial networks.
Property pipe network
Municipal drainage
Catering drains
Industrial pipes
View pipe-jetter series
J-1020D
Electric small-drain equipment for residential, food-service and building drain maintenance, including 50/75 mm pipes.
- Equipment category: high-pressure drain cleaners
- Operation: electric pressure washing
- Working pressure: 100bar（10MPa）
J-1730D
Current information describes J-1730D with 380 V electric power, 170-kilogram pressure and 30 L/min for continuous flushing at fixed property drains, food-service grease lines, factory branches and commercial complexes.
- Equipment category: high-pressure drain cleaners
- Operation: electric pressure washing
- Maximum pressure：170bar（17MPa）
J-1730H
For assessed pipe jetting, pipe-wall washing and heavy-deposit removal tasks.
- Equipment category: high-pressure drain cleaners
- Operation: electric pressure washing
- Maximum pressure：170bar（17MPa）
J-2050D
Jinjie J-2050D uses 380 V electric power, a source-stated pressure of 200 "kg" and 50 L/min flow for long-distance flushing and heavy sediment in municipal drains, property mains, factory grease lines and construction sites. The pressure unit requires verification.
- Equipment category: high-pressure drain cleaners
- Operation: electric pressure washing
- Maximum pressure：200bar（20MPa）
J-1730HS
Stainless protective body and mobile pressure-hose reel for assessed property, commercial, factory and municipal branch-drain tasks.
- Equipment category: high-pressure drain cleaners
- Body structure: stainless protective housing
- Hose storage: vehicle-mounted high-pressure hose reel
J-2050H
High-flow pressure-jetting equipment for longer pipe runs, subject to configuration checks.
- Equipment category: high-pressure drain cleaners
- Operation: electric pressure washing
- Maximum pressure：200bar（20MPa）
J-2050HS
J-2050HS is described as a structural upgrade to J-2050H, with the same 200bar（20MPa） / 50 L/min core specification and a 304 stainless hose reel; assess for long-term frequent property, factory and commercial maintenance tasks.
- Equipment category: high-pressure drain cleaners / pipe-cleaning equipment
- Product relationship: structural upgrade to J-2050H
- Maximum pressure：200bar（20MPa）
J-1730C
170bar（17MPa） pressure and 30 L/min flow, with a 304 stainless-steel frame, a 30 m high-pressure hose reel and one spray gun; consider for outdoor cleaning and pipe maintenance.
- Pressure: 170bar（17MPa）
- Flow: 30L/min
- Power source: diesel
7F
Custom equipment design and production
For conditions beyond standard equipment, discuss functional design, modification, structural customization and supporting production to fit actual environment/tasks.
Functional design
Equipment modification
Structural customisation
Supporting production
View custom-engineering references
C750-25E
Custom ultra-high-pressure washing in the source's 800–1500 kg pressure class, for demanding paint/rust removal and special tasks; confirm the pressure-unit basis for the project.
- Model role: custom ultra-high-pressure washer
- Typical sites: paint/rust removal, concrete texturing and heavy surface preparation
- Before ordering: confirm safety boundaries, protection rating, cleaning object, training, recovery, pressure and flow.
J-7530
For surface-cleaning projects involving industrial equipment and water-compatible metal parts
- Normal working pressure: 750bar
- Maximum pressure: 850bar
- Flow: 30L/min
Custom configuration · Illustration
Custom high-pressure cleaning skids
Configure motor-pump units, frames, controls and hose reels as fixed or skid-mounted cleaning systems for the task.
Custom configuration · Illustration
Production-line washing stations
Configure enclosed wash stations, conveyor interfaces, nozzles and piping against workpiece size and production timing.
Custom configuration · Illustration
Equipment descaling and heavy-soil cleaning
Select high-pressure units and tools for equipment surfaces, moulds and heat-exchanger parts, subject to material and protection requirements.
Custom configuration · Illustration
Mobile high-pressure cleaning units
Integrate pump units, controls and hose reels on trolleys or mobile bases for cleaning at multiple locations.
Custom configuration · Illustration
Spray piping and protective configurations
Configure spray piping, valves, pressure monitoring and guards; interlocks and protective provisions require project design review.
8F
Municipal cleaning equipment series
Combine waste collection, road washing, sweeping and transport equipment for area, roads and sanitation needs in municipal, property, scenic-site and township applications.
Municipal roads
Property estates
Scenic squares
Township sanitation
View municipal cleaning equipment
JC-268
For leaves in landscaped areas, roads, scenic sites and property exteriors.
- Model role: garden leaf collector
- Typical sites: park/school roads, scenic routes and leaves in planted areas
- Before ordering: confirm leaf load, route length, bag capacity and transfer points.
JC-80H
For chipping pruned branches, reducing green-waste volume and onsite collection.
- Model role: branch chipper
- Typical sites: pruning, branch-volume reduction and park green waste
- Before ordering: confirm branch diameter, location, noise restrictions and collection/transfer arrangements.
JQ-50
For bin collection/transport in communities, scenic sites, municipal side roads and estates.
- Model role: three-wheel waste carrier
- Typical sites: residential, park and commercial multi-point waste transfer
- Before ordering: confirm bin quantity, route length, ramps, lifts and charging.
JC-500JY
Combined pressure water-sweeping and washing for road dust, kerbs, plazas and estate rounds.
- Model role: three-wheel water-sweeping vehicle
- Typical sites: residential/park roads and roadside oil or dust
- Before ordering: confirm tank capacity, refill points, road width and oil/dust conditions.
JC-500S
An onboard pressure washer for residential/estate roads, municipal side roads, kerbs and public areas.
- Model role: three-wheel pressure-washing vehicle
- Typical sites: property exteriors, roadside oil, waste points and edges
- Before ordering: confirm pressure, flow, tank, refill points, road material and operating windows.
JQ-260
Enclosed electric municipal vehicle for assessed property, municipal and park waste transfer
- Model role: self-unloading waste carrier
- Typical sites: park waste transfer, property collections and green waste
- Before ordering: confirm transported weight, unloading height, gradients and loading space.
JQ-8
For consolidated multi-bin transport in residential, estate and municipal rounds.
- Model role: eight-bin waste carrier
- Typical sites: residential, park, school and retail bin collection points
- Before ordering: confirm bin dimensions, collection points, road width and transfer distance.
JC-1800
Four-wheel pressure-washing vehicle for municipal roads, plazas, factory exteriors and large estates.
- Model role: four-wheel pressure-washing vehicle
- Typical sites: park main roads, municipal roads and extensive outdoor washing
- Before ordering: confirm road length, refill points, traffic routes, washing frequency, parking and charging.
9F
Premium-hotel cleaning equipment
Combine guestroom cleaning, floor care, linen handling, waste and public-area equipment by hotel scale, zone and service standard, including clubs, apartments and commercial complexes.
Hotel guest rooms
Floor care
Linen handling
Commercial complexes
View hotel cleaning equipment
CL10
A compact quiet-use vacuum for daily office, meeting-room and guest-room vacuuming; assess actual disturbance.
- Power: 1000 W
- Cooling mode: circulation
- Vacuum suction: 1,800 mmH
CL20
A commercial vacuum positioned for lower-disturbance use in hotels, offices and shopping centres.
- Capacity: 20 L
- Power: 1000 W
- Operating voltage：220V
J-25B
Supports air drying after carpet/floor cleaning, helping manage residual moisture and reopening time.
- Model role: J-25B floor dryer
- Typical sites: wet entrances, post-carpet cleaning and post-stone care
- Before ordering: confirm airflow, placement, pedestrian safety and drying-time requirements.
JMS-2
For cleaning and maintaining fabric upholstery in guest rooms and club interiors; confirm material compatibility.
- Model role: JMS-2 upholstery cleaner
- Typical applications：Fabric sofas、Club seating、Office upholstery
- Before ordering: confirm fabric, stains, drying requirements and chemicals.
CD17P
An orbital machine for compatible hard-floor cleaning, stripping and spray maintenance; with an electronic foam tank, assess interim carpet care. For hotels, restaurants, offices and campuses, confirm surface, accessories and disturbance requirements.
- Model role: CD17P floor-care machine
- Typical sites: stone, PVC, epoxy and retail floor care
- Before ordering: confirm flooring, speed, brushes/pad holders and care chemicals.
CL60-2
Wet/dry vacuum for assessed meeting-room, office and commercial emergency cleaning
- Model role：CL60-2Wet and dry vacuum
- Typical sites: meeting rooms, pantries, discussion areas and local wet dirt
- Before ordering: confirm wet-pickup requirements, recovery capacity, carpet material and drying time.
CL70-2C
Routine office, corridor and meeting-area vacuuming for property and commercial cleaning teams
- Model role：CL70-2CWet and dry vacuum
- Typical sites: offices, training rooms, open-plan workspaces and corridors
- Before ordering: confirm occupied hours, noise, cable length and storage space.
CL70-2
For water and dust pickup in shopping centres, hotels and public spaces
- Model role：CL70-2Wet and dry vacuum
- Typical sites: retail, restaurant aisles, rainy entrances and washroom doors
- Before ordering: confirm recovery load, routes, wastewater handling and trading hours.
10F
Parts and consumables range
Cleaning chemicals, brushes, pads, dust mops, waste bags and wear parts can be matched to the machine, surface and cleaning needs for commercial premises, properties, hotels and factories.
Commercial cleaning
Property maintenance
Daily hotel cleaning
Factory supplies
View parts and consumables
Rear-wheel drive motor
This part is for replacing a machine's traction-drive components. Confirm the original model, mounting interfaces and electrical configuration to avoid an unsuitable purchase based only on appearance.
- Power range: 500–1200 W, selected for the machine model
- Configuration note: different ratings refer to different configurations; they do not indicate adjustable power on one motor.
Front-wheel drive motor
This part is for replacing a scrubber's front-wheel drive assembly. Check the original mounting structure, wheel dimensions and wiring rather than relying on a similar appearance.
Battery chargers
Battery chargers for floor scrubbers. Confirm battery chemistry, voltage and capacity before purchase.
- Category: Parts and consumables
- Selection check 1: Voltage compatibility
- Selection check 2: Battery maintenance
Brush
Routine scrubbing brushes, selected for the machine model, brush diameter and floor material.
- Category: Parts and consumables
- Selection check 1: Compatible machine model
- Selection check 2: Brush stiffness
Brush motor
Scrubber brush-drive repair parts. Check the model, voltage, power and mounting dimensions.
- Category: Parts and consumables
- Selection check 1: Brush drive
- Selection check 2: Power compatibility
Recovery motor
Vacuum motors for scrubber recovery systems. Match the machine model, voltage and connections.
- Category: Parts and consumables
- Selection check 1: Vacuum recovery
- Selection check 2: Voltage compatibility
Recovery hoses
Recovery hoses for floor scrubbers. Confirm connections, hose diameter and machine model.
- Category: Parts and consumables
- Selection check 1: Wastewater recovery
- Selection check 2: Original machine connections
Glass cleaner
Routine cleaning of glass, mirrors and smooth surfaces in properties, hotels and commercial spaces.
- Category: Parts and consumables
- Selection check 1: Glass and mirrors
- Selection check 2: Routine soil removal
11F
Baolaisi cleaning chemicals
Select cleaning/care products by task, material and process.
Factories
Property management
Parks
Municipal
View Baolaisi cleaning chemicals
PS-385
Neutral formulation for routine soil removal on water-resistant hard floors
- Product category: Baolaisi cleaning chemicals
- Configuration 1: routine cleaning
- Configuration 2: all-purpose cleaner
PH-105
Grease cleaning on kitchen cooktops, exhaust facilities and detergent-resistant surfaces
- Product category: Baolaisi cleaning chemicals
- Configuration 1: grease cleaning
- Configuration 2: heavy-duty degreaser
PS-182
Foam cleaning of carpets suitable for wet cleaning
- Product category: Baolaisi cleaning chemicals
- Configuration 1: carpets and upholstery
- Configuration 2: high-foam carpet shampoo
P-303
Mildly acidic cleaner for acid-resistant surfaces within its documented uses
- Product category: Baolaisi cleaning chemicals
- Configuration 1: specialist cleaning
- Configuration 2: acidic cleaner
P-A001
Spot treatment of oil, coffee and fruit-juice stains on suitable carpets
- Product category: Baolaisi cleaning chemicals
- Configuration 1: carpets and upholstery
- Configuration 2: carpet spot remover
PH-101
Low-foam carpet cleaner for compatible extraction processes
- Product category: Baolaisi cleaning chemicals
- Configuration 1: carpets and upholstery
- Configuration 2: low-foam carpet shampoo
PH-106
Suppresses foam in cleaning recovery systems; not a surface detergent
- Product category: Baolaisi cleaning chemicals
- Configuration 1: equipment support
- Configuration 2: fast-acting defoamer
PH-603
Carpet-cleaning powder for procedures permitted by its documentation
- Product category: Baolaisi cleaning chemicals
- Configuration 1: carpets and upholstery
- Configuration 2: carpet powder
application illustration
Explore equipment combinations by industry
Site-specific configurations differ; compare plans by customer type, area and frequency.
Cleaning service companiesConfigure scrubbers, sweepers, consumables and maintenance by contract scope, frequency and shifts.
Residential propertyRoutine cleaning of underground car parks, estate roads, lift lobbies, building surrounds and waste-collection points.
Factory workshopCombine equipment for dust, grease, metal chips, forklift routes and logistics aisles.
Municipal roadsConfigure road sweeping, washing/dust suppression, waste transfer and outdoor maintenance by task.
Selection guide
Four steps to confirm equipment configuration
Assess the site, contamination, duty and maintenance together rather than selecting by one name or number.
Area, passages, slopes, lifts, floor material and drainage determine machine dimensions and operating methods.
Dust, gravel, grease, standing water, leaves and pipe blockages require different cleaning mechanisms.
Select power, runtime and quantities by shifts, frequency, continuous hours and staffing.
Include trials, training, wear parts, consumables, repairs and maintenance in the plan.
Product enquiry
Unsure of the model? Start with site information.
Tell us area, flooring, contamination, access and frequency to narrow models and configuration.