How should I choose by size?

J-101 is the compact four-wheel model with a 600mm cleaning width. J-380 and J-390 are larger three-wheel models with a 900mm cleaning width, suited to comparison for open routes and turning arrangements. Cleaning width is not the vehicle passing width; measure doors, narrow access and the turning envelope including projecting mop heads.

Can it recover water or remove grease?

Dust mopping is for permitted ordinary dry dust. It is not water recovery, floor scrubbing or grease removal.

Is one mop suitable for every floor?

Confirm compatibility of the supplied mop material with the floor finish. Trial an isolated area and check for marks or residue first.

Selected model: Jinjie J-101 Compact Four-wheel Ride-on Dust-Mopping Vehicle

Typical application

Ride-on dust-mop maintenance for indoor hard floors

Jinjie J-101 Compact Four-wheel Ride-on Dust-Mopping Vehicle

Plan ordinary dry-dust maintenance with the actual J-101, J-380 and J-390 assemblies, checking access, turns, floor compatibility and working envelope.

J-101 Pre-opening retail-aisle dust mopping

Discuss this application

Work plan for this scene

Remove bulky debris before opening, then maintain main aisles and corners in sections. Keep the route separate from customers and clean loaded mop heads promptly.

Parameters for this model

Cleaning width: 600mm
Wheel layout and size class: Four-wheel / compact
Seat: Adjustable
Nominal range: 30km
Nominal operating time: 3–4h
Brake system: Electromagnetic brake
Rated carried load: 100kg
Motor output: 180–220W
Vehicle weight: 46kg
Nominal cleaning efficiency: 4800㎡/h
Battery capacity: 20Ah

Cleaning width is not passing width. Nominal efficiency, range and operating time depend on working conditions.

Customer cleaning problem

Small amounts of ordinary dry dust are repeatedly tracked into lobbies, commercial corridors and internal warehouse routes. Unplanned manual rounds can miss long aisles or repeat the same trip, while access, turns and pedestrian/vehicle separation still matter. Liquids, sticky marks and bulky debris need a different process.

Why select a ride-on dust-mopping vehicle

The seat, steering controls and front/rear mop assemblies support planned dry maintenance. J-101 is the compact 600mm four-wheel option; J-380 and J-390 are larger 900mm three-wheel options. Compare the complete body and projecting mop envelope, turns and floor compatibility. Cleaning width does not establish passing width.

Practical work method

Confirm a level, dry floor and compatibility with the supplied mop material. Remove sharp items, coarse debris and liquids first. Isolate the route, complete the supplied control and parking checks, and place the original mop assemblies in their prescribed floor-contact position. Work by sections with clearance at doors, turns and racks. Stop to clean loaded mop heads and finish inaccessible edges with suitable tools.

Practical customer value

A planned route and maintained mop heads can improve everyday tidiness, reduce missed areas and repeat trips, and reduce the walking burden of long manual dust-mopping rounds. Checking the full working envelope before ordering helps avoid access-related downtime and mismatched assemblies. No fixed coverage, saving percentage or measured result is promised.

Limits and purchasing checks

Use only for ordinary indoor dry dust maintenance supported by the supplied configuration. It does not replace scrubbing and water recovery, filtered vacuuming, bulky-waste sweeping or stone restoration. Resolve slippery floors, slopes, hazardous dust and mixed traffic separately. Provide narrowest access, door and turning photos, floor material, ordinary soil and work periods. Confirm dimensions, working width, power, battery and load limits for the actual unit.