Zone areas, narrowest access, doorways and lift dimensions
Application plan: autonomous floor cleaning
Autonomous floor-cleaning solution
For large regular indoor areas in malls, hospitals, exhibitions, airports, rail stations and offices, combining navigation, avoidance and human collaboration to reduce repetitive floor work.
This is an application plan, not a verified success case. Confirm models, quantities, chemicals and attachments through site assessment/trials.
Information required before purchase
Clarify the site before models, quantities and prices
Without this information, only equipment directions are given; an illustrative plan is not a fixed shopping list.
Floor/target material, contamination source and severity
Daily frequency, deadline, shifts and visitor/production avoidance windows
Power, refilling, wastewater, charging, storage and equipment transfer
Noise, slip safety, mixed traffic, chemicals and wastewater requirements
Existing machines, consumable stock, maintenance skills and acceptance criteria
Site challenges
Common autonomous commercial/public floor-cleaning challenges
Repeated routes occupy regular staff shifts
Changing people/obstacles require reliable avoidance and takeover arrangements
Water, emptying and charging still need management
Suggested configuration
Combine equipment by task; one model does not cover every condition
Categories/models are discussion starting points; confirm site conditions before final configuration.
Autonomous cleaning equipmentCompare autonomous scrubbers, sweepers and multifunction robots by area, routes, obstacles, task, time window and human takeover conditions.Scrubber-DryerWalk-behind, ride-on and autonomous scrubbers are selected by area and use conditions for garages, factories, retail/hospitals and estates.
Jinjie J-W70 Autonomous ScrubberAn autonomous scrubber-dryer for hotel lobbies, offices, shopping-centre passages, hospitals, schools, transport hubs, exhibition halls and defined factory aisles. Mapping, route planning and active obstacle avoidance support repetitive floor tasks, subject to deployment checks.View model specifications
Jinjie CC1 four-in-one cleaning robotCombined sweeping, scrubbing, recovery and pushing for indoor floors in malls, hospitals, hotels, offices, schools, food service and transport facilities.View model specifications
Jinjie Allybot-C2 commercial cleaning robotCombines scrubbing, vacuuming and dust mopping for indoor commercial spaces such as offices, hospitals, shopping centres, hotels, schools, restaurants, gyms and transport buildings, subject to site conditions.View model specifications
Application branches
Different soil, scale and shifts require different configurations even in similar sites
Choose the main approach for the site; use alternatives for access, power, transfer or duration limits.
Frequent fixed-route washing in malls/hospitals
- Initial recommendation
- Autonomous scrubber + manual edge support
- Alternative method
- Shift peak-traffic tasks to nighttime or separate zones
- Selection basis
- Stable routes highlight autonomous equipment's repetitive-task value
Repeated estate/factory road rounds
- Initial recommendation
- Autonomous sweeper + manual emptying/exception takeover
- Alternative method
- Retain operator-driven sweepers for complex mixed-traffic routes
- Selection basis
- Verify boundaries, obstacle density and waste recognition first
Multiple floors or complex pedestrian traffic
- Initial recommendation
- Zoned deployment + lift/access-control integration assessment
- Alternative method
- Use manual transfers/fixed-floor tasks until integration is ready
- Selection basis
- Do not assume one machine covers every floor and time window
Chemical selection
Choose chemicals by contamination and floor; do not use one everywhere
These are supporting options. Follow labels, safety data sheets and equipment manuals; trial compatibility inconspicuously.
Equipment-compatible low-foam neutral cleaner
Application: routine autonomous hard-floor cleaningUse only manufacturer-permitted chemicals/concentrations to avoid foam affecting sensors and recovery systems.
Low-residue cleaner
Application: hospitals, malls and frequent trafficVerify drying, slip safety and floor compatibility first
Local heavy-soil pretreatment cleaner
Application: adhesive/oil spots on machine routesManually pretreat locally before machine work; do not add concentrate directly
Safety note:Do not mix acids, alkalis, chlorine products or disinfectants. Reconfirm food, medical, electronics, antistatic-floor and wastewater requirements with site management.
Attachment selection
Match brushes, blades, nozzles, filters and hoses to each task
Attachments affect results, surface protection, recovery and downtime. Prepare wear-part/spares lists when purchasing machines.
Charging dock/workstation and water-service components
Application: frequent continuous tasksDetermines the autonomous work loop and manual servicing frequency
Side/rotary brushes, blades and sensor-cleaning kit
Application: routine maintenance and wear-part rotationMaintain stable edge work, scrubbing, recovery and sensing
Warning signs, remote management and manual-takeover tools
Application: public spaces and mixed trafficDefine abnormal-event handling and responsibility before deployment
Site operation video
Jinjie J-W70 autonomous scrubber demonstration
Trial routes, avoidance, scrubbing and recovery before defining cooperation between autonomous machines and staff.
Implementation steps
From assessment and trials to equipment delivery
Assess before/after cleaning, area covered per time, wastewater pickup, residue and consumable wear.
Assess route stability and access width
Record selection reasoning, configuration limits, chemical/attachment combinations and site conditions requiring confirmation.
Verify mapping, avoidance and cleaning results
Record selection reasoning, configuration limits, chemical/attachment combinations and site conditions requiring confirmation.
Define manual takeover and daily-maintenance boundaries
Record selection reasoning, configuration limits, chemical/attachment combinations and site conditions requiring confirmation.
Intended outcome
Main intended improvements
Acceptance and evidence
Validate with site records, not marketing claims
For a representative test area, record the initial condition, equipment, attachments, chemical dilution, time and finish at the same point. Agree the handover criteria using these records.
Project evidence and application references
View all casesCheck authenticity labels before using configuration/delivery references
Project application reference
Office and Commercial Cleaning Plan
A combination of low-noise vacuuming, carpet cleaning, stone care and commercial wet/dry vacuum equipment.
Read the full article; contact us for a detailed plan
Project application reference
Property Underground Garage Cleaning Plan
A mix of walk-behind and ride-on scrubber-dryers for ramps, parking bays and main aisles.
Read the full article; contact us for a detailed planFAQ
Autonomous floor-cleaning questions
Who is this plan for?
Mainly autonomous washing in commercial/public spaces; confirm area, routes, soil and shifts.
Can recommended configurations be copied directly?
No. Listed configurations establish a selection direction; verify access, utilities, operating duration and budget for final models.
What support can Wan Sheng Long provide?
Site discussions, selection, trial advice, training, consumables, parts and maintenance support are available.
Site-plan enquiry
Submit area, contamination and frequency
Wan Sheng Long advises on equipment direction, model comparison, trials, training and service based on site conditions.
Related knowledge
Visit the knowledge centre
Autonomous floor-cleaning implementation, configuration and selection guidance
Explore the plan through site challenges, equipment combinations, steps and maintenance requirements.
Planning cleaning equipment for hotels, offices and housekeeping companies
For hotels and commercial spaces, plan quiet-use vacuums, carpet cleaners, stone-care machines, escalator cleaners and consumables around noise needs, carpet/stone floors, lobbies, corridors, escalators and guest rooms.
Read article
Pressure-cleaning applications: wall posters, road markings, equipment refurbishment and rust
Pressure, flow and nozzle combinations affect results. Match equipment and methods separately for wall posters, road markings, equipment refurbishment, coated roofing, rust and ship cleaning; suitability requires material and process assessment.
Read article
Choosing a jetter for 50mm and 75mm pipes: property applications for J-1020D
J-1020D pipe jetter pressure 100 bar (10 MPa)、flow 20 L/min、high-pressure hose 30 meters, suitable for property complexes, catering kitchens, building drainage and maintenance of small diameter blockages.
Read article
Configuring pressure-washing equipment in Zhuhai: assess the site before the model
Do not select pressure-washing equipment in Zhuhai by price alone. Confirm voltage, pressure, flow, water supply and protection before comparing 220 V, 380 V, petrol and high-flow options.
Read article
Zhuhai hotel/office equipment: inspect the site before choosing the model
Zhuji hotel office building commercial cleaning should not only select equipment based on price, but should focus on low noise, ease of training, stable consumables, and material protection when determining the configuration, and then match quiet vacuum cleaners, floor scrubbers, carpet machines, and cleaning agents.
Read article
Zhuhai drain equipment: inspect the site before choosing the model
Zhuji property management should not only select equipment based on price, but should confirm the configuration around pipe diameter, pipe length, elbows, clogging objects, and nozzle combinations, and then match J-1020D, J-1730H, J-2050H pipe jetters.
Read article