
Rear-wheel drive motor
Travel motor
- UseTravel drive repair
- CompatibilityRated power, output arrangement and mounting dimensions
Suitable forRear-wheel drive maintenance on scrubber dryers
Find products by model, equipment type or conditions.
13 models found

Travel motor
Suitable forRear-wheel drive maintenance on scrubber dryers

Travel motor
Suitable forFront-drive assembly service on scrubber dryers

Brush motor
Suitable forScrubber brush-drive service

Squeegee blades
Suitable forWorkshop scrubber squeegee maintenance

Squeegee blades
Suitable forRecovery blade replacement for factory scrubbers

Recovery motor
Suitable forScrubber wastewater recovery system service

Maintenance spares
Suitable forScrubber maintenance in underground garages

Brush
Suitable forScrubbing concrete and epoxy floors

Battery chargers
Suitable forScrubber battery charging points

Battery
Suitable forScrubber battery replacement

Recovery hoses
Suitable forScrubber recovery hose maintenance

Wheels
Suitable forScrubber travel wheel maintenance

Cleaning chemicals
Suitable forShop windows and glass surfaces
No matching products. Reset conditions or contact us.
Select up to three models to compare tasks and configurations.
No equipment selected.
Parts vary by model, dimensions, interface and mounting. Confirm model or original specifications rather than appearance alone.
Confirm model, brush dimensions, squeegee structure, battery and charging interface first.
Check sweep width, mounting and original dimensions for brushes and filters.
Verify working pressure, connection, length, diameter and pump output.
Match nozzles to diameter, jet directions, interfaces, pressure/flow and blockage.
Match filters, hoses and pickup tools to diameter, dust type, wet/dry conditions and original connections.
For hotels, shopping centres and offices, assess noise, surface materials and routine-maintenance convenience.
Municipal structures vary; confirm brushes, water systems, electrical and vehicle parts individually.
| Part type | Key checks |
|---|---|
| Brushes / Floor brushes | Confirm diameter, hardness, mounting and flooring. |
| Squeegee blades | Verify length, holes, thickness, mounting direction and squeegee structure. |
| Floor pad | Select by dimensions, colour/hardness, flooring and care task. |
| Battery chargers | Confirm voltage, current, battery type, connector and equipment compatibility. |
| Electrical components | Confirm voltage, power, connectors, mounting and original configuration. |
| High-pressure hose | Confirm working pressure, connection, length, diameter and equipment model. |
| Guns / Nozzles | Match pressure, flow, connections and the cleaning object. |
| Jetting nozzle | Confirm diameter, blockage, jet directions, pressure/flow and interfaces. |
| Vacuum attachments | Confirm hose diameter, tool design, dust and wet/dry capability. |
| Cleaning chemicals | Select by material, purpose and low-foam requirements. |
| Tissues / waste bags / tools | Configure by site, dimensions and stocking requirements. |
Parts cards show use, compatibility and specifications. Similar appearance does not establish compatibility with all models.
Lists show images, names, uses, compatibility direction and confirmed specifications; confirm exact fit before ordering.
| Compatibility wording | Description |
|---|---|
| Compatibility established | For example, a specific Jinjie model, provided compatibility has been established. |
| Match by specification | Suitable for specified dimensions or connections; verify mounting dimensions and the original part before purchase. |
| To be confirmed | Interfaces differ. Provide the model, nameplate or original-part photo to confirm compatibility. |
No fixed replacement interval is promised; frequency, flooring and wear determine replacement.
Blades / Brushes / Pads / Recovery hoses / Chargers / Recovery motors
Main brushes / Side brushes / Filters / Wear parts
Pressure hoses / nozzles / lances / seals / filters
Drain nozzles / high-pressure hoses / quick couplings / reel accessories
Filters / hoses / squeegees / pickup tools / connectors
Confirm brand, model and nameplate to avoid similar-name or appearance mismatches.
Photograph connectors, mounting holes, wear surfaces and the overall structure to identify replacement options.
Record length, diameter, hole spacing, thickness, connector type and mounting method.
Identify whether the part belongs to the scrubbing, water recovery, drive, water, electrical or vacuum system.
Confirm voltage, current, battery type and connectors for electrical components and chargers.
Flooring, pollutants, chemicals and frequency affect consumable selection.
Check surfaces, purpose, dilution and foam requirements. Confirm undocumented chemistry, safety ratings or specialist uses before selection.
Check current, battery chemistry, connector and equipment as well as voltage. A 24 V charger does not automatically fit every 24 V machine.
For pressure accessories, confirm working pressure, connection, length, diameter, equipment model and pump output, not just thread appearance.
Match pipe diameter, jet direction, connection, pressure, flow and blockage type. One nozzle does not suit every pipe.
Planning spares and consumables: brushes, squeegees, motors, chargers and chemicalsProperties and cleaning companies should plan commonly used parts by project to support maintenance continuity.
Scrubber-dryer parts and consumables on a workbench; selection illustrationPlan project-specific consumable kits for frequently used scrubber-dryers to limit downtime from blades, motors, recovery hoses and batteries.
Selecting a drain jetter: pressure, flow, hose length, nozzles and pipe diameterDrain jetting should not be selected by maximum pressure alone. Flow, hose length, nozzle angle and blockage material also affect suitability.
Choosing a jetter for 50mm and 75mm pipes: property applications for J-1020DThe current source lists J-1020D at100bar(10MPa),20L/min with a30m hose for property drainage, restaurant kitchens, building drains and small-pipe blockages. Confirm pipe, nozzle and site compatibility before selection.
Selecting a scrubber-dryer: area, floor and frequency firstCheck cleaning area, aisle width, floor material and staffing before comparing price alone.
Checking brushes, squeegees and batteries at handoverAt handover the team should be able to identify the supplied configuration, perform daily checks and order the right consumables.Provide model, nameplate, original-part photos and dimensions. Electrical parts, pressure hoses and nozzles also require voltage, current, interfaces, pressure or flow checks.
Photos support initial identification; also provide nameplate, dimensions and interfaces because similar appearances can hide different mountings.
Appearance is insufficient. Confirm dimensions, interfaces, mounting and operating conditions before accepting compatibility.
Check length, width, thickness, holes, installation direction and squeegee structure. Photos of the original blade and squeegee are recommended.
Battery type, voltage, current and connector all affect charging safety and compatibility; matching voltage alone is insufficient.
Pressure rating, connection, length and diameter affect hose safety and cleaning. Match them to machine pressure and pump output.
Select by pipe diameter, blockage, pressure, flow, jet direction and connection. Grease, sediment and long lines require different nozzle arrangements.
Send machine, nameplate and original-part photos with dimensions so sales can narrow compatibility.
Provide nameplate, original-part photos, dimensions, connectors and location to identify parts or consumables.
Consumables directly influence cleaning, surface protection, downtime and ongoing costs; they are part of the configuration.
Brushes, blades, motors, batteries and chargers must fit the model. Check interfaces and dimensions to reduce rework.
Epoxy, terrazzo, tile, stone and coatings need appropriate hardness, abrasives and chemicals; mismatches can damage cleaning quality or surfaces.
Plan stocks for property, hotels, retail and contractors by equipment count, frequency and supply timing.