J-D5R · Caring for a single disc and squeegee
Inspect the brush, blades and recovery system after shutdown and power isolation.
Brushes and blades
After shutdown and power isolation, check wear and entanglement. Keep hands clear during operation.
Tanks and hoses
Drain wastewater, rinse the recovery tank and inspect hose blockage and seals.
Battery and charging
Use a matched charger and follow the battery and machine manuals; isolate power before servicing.
Use the water mark to narrow the check
For a thin line that repeats on a straight pass, isolate the machine and inspect the matching point on the blade for trapped grit or local wear. For broad wet patches, check the recovery hose, lid seal and full-tank protection before ordering replacement blades. Follow the manual for cleaning or replacement.
Verify the repair on the original route
Repeat a straight pass and a turn on the same floor with the same brush and solution setting. Record any remaining streak or pooling. If recovery is still uneven, note where it occurs and the tank fill level when contacting service.
View J-D5R specifications Discuss site suitability