CN EN

J-D9R · J-D9R brush and recovery care

Inspect brushes, blades, tanks and hoses to support scrubbing and recovery.

J-D9R brush and recovery care

Brushes and blades

After shutdown and power isolation, check wear and entanglement. Keep hands clear during operation.

Tanks and hoses

Drain wastewater, rinse the recovery tank and inspect hose blockage and seals.

Battery and charging

Use a matched charger and follow the battery and machine manuals; isolate power before servicing.

Compare the two sides of the scrub path

If soil repeatedly remains on one side or at the overlap, shut down and isolate the machine. Check that the two brushes match in specification and are fitted correctly, then compare wear. If cleaning is even but a water line remains, inspect the matching edge of the blade and the recovery path as the manual directs.

Retest on both a turn and a floor joint

Repeat the original pass with the same solution setting and include the affected turn or joint. Compare the left and right finish, water retained at the joint and the condition after recovery. Send service the affected location and a photo if the difference persists.

View J-D9R specifications Discuss site suitability

Return to the equipment you were viewing: J-D9R →