CN EN

Typical application

Outdoor hard-surface pressure washing: lance, optional bars and water handling

Identify the object before power, material tolerance, delivered configuration and waste destination. More pressure is not automatically more suitable; a pictured accessory is not necessarily included.

Typical application: Outdoor hard-surface pressure washing: lance, optional bars and water handling
Original product Scene illustration for task and configuration assessment; not proof of delivery, complete machine configuration or measured results.

Assess a lance for local targeting and a bar only as a verified compatible assembly. Organise work by water handling and trials, not fixed-output or measured-saving promises.

Typical application · Equipment selection

Sectional sediment washing around sites | J-3522H working plan

J-3522H

Collect larger particles, then plan washing from higher ground toward collection points to reduce sediment returning to cleaned areas. Material trials, compatible nozzles and isolation help improve cleaning and manage finish damage and splash risks. Match supply, drainage and recovery to organise working time and labour.

J-3522H open-outdoor zoned-flushing illustration
J-3522H · Typical application

01 · What makes this task difficult?

Open outdoor paving and building perimeters collect sediment, tracked marks and ordinary removable dirt. Simply pushing sediment into the next section creates repeat work and interrupts access. Establish material and joint compatibility, water supply and wastewater collection first.

Sediment washes back from adjacent sections

Remove larger debris and follow slope toward collection

Unsuitable spray can damage paving and joints

Trial suitable settings and protect sensitive surfaces

Manage access, exhaust and wastewater outdoors

Match the working plan to supply and recovery

02 · Why consider this Jinjie machine?

J-3522H uses petrol-powered pressure washing for suitable open-air work under its instructions. A compatible single-lance nozzle can loosen and move ordinary sediment section by section. Trial nozzle, distance and working setting against the material; this does not establish parallel outlets or specialist attachments.

Compatible single-lance nozzle and sectional washing

Remove larger debris and follow slope toward collection

Reduce rework and repeated rinsing

Material trials and nozzle/distance matching

Trial suitable settings and protect sensitive surfaces

Improve cleaning and reduce damage risks

Open-air operation, isolation and recovery

Match the working plan to supply and recovery

Organise labour and cleaning time more effectively

J-3522H · J-3522H uses petrol-powered pressure washing for suitable open-air work under its instructions. A compatible single-lance nozzle can loosen and move ordinary sediment section by section. Trial nozzle, distance and working setting against the material; this does not establish parallel outlets or specialist attachments.

03 · A better cleaning workflow and customer value

Collect larger particles, then plan washing from higher ground toward collection points to reduce sediment returning to cleaned areas. Material trials, compatible nozzles and isolation help improve cleaning and manage finish damage and splash risks. Match supply, drainage and recovery to organise working time and labour.

Reduce rework and repeated rinsing

Sediment washes back from adjacent sections · Remove larger debris and follow slope toward collection

Improve cleaning and reduce damage risks

Unsuitable spray can damage paving and joints · Trial suitable settings and protect sensitive surfaces

Organise labour and cleaning time more effectively

Manage access, exhaust and wastewater outdoors · Match the working plan to supply and recovery

Match tools, the material and the working route before comparing labour, time, consumables and maintenance costs. The potential value depends on suitable conditions and correct operation; no fixed saving or damage-free result is promised.

Working conditions and safety

Use petrol equipment only in suitable open-air conditions under its instructions, never in underground garages, indoors or semi-enclosed exhaust-accumulation areas. Trial first, protect joints, openings and electrics and avoid people and sensitive equipment. Collect sediment and wastewater for site-compliant disposal. No coating-removal grade, explosion protection or multi-operator ability is inferred.

Working method, evidence and original professional analysis

Task-specific equipment selection

Sectional sediment washing around sites | J-3522H working plan

Site, material and contamination

Open outdoor paving and building perimeters collect sediment, tracked marks and ordinary removable dirt. Simply pushing sediment into the next section creates repeat work and interrupts access. Establish material and joint compatibility, water supply and wastewater collection first.

Equipment basis and model differences

J-3522H uses petrol-powered pressure washing for suitable open-air work under its instructions. A compatible single-lance nozzle can loosen and move ordinary sediment section by section. Trial nozzle, distance and working setting against the material; this does not establish parallel outlets or specialist attachments.

Model configuration and selection

Check model-specific configurations against the machine and order before purchase.

ModelCurrent basis and limits
J-3522HJ-3522H uses petrol-powered pressure washing for suitable open-air work under its instructions. A compatible single-lance nozzle can loosen and move ordinary sediment section by section. Trial nozzle, distance and working setting against the material; this does not establish parallel outlets or specialist attachments.
Site problemEquipment / conditionsSuggested methodPotential value
Sediment washes back from adjacent sectionsCompatible single-lance nozzle and sectional washingRemove larger debris and follow slope toward collectionReduce rework and repeated rinsing
Unsuitable spray can damage paving and jointsMaterial trials and nozzle/distance matchingTrial suitable settings and protect sensitive surfacesImprove cleaning and reduce damage risks
Manage access, exhaust and wastewater outdoorsOpen-air operation, isolation and recoveryMatch the working plan to supply and recoveryOrganise labour and cleaning time more effectively

Working method, accessories and site supply

  1. Identify material, debris and compatible tools; trial under the machine instructions.
  2. Zone the work and manage access, following the planned route.
  3. Inspect cleaning, water or sediment collection and maintain equipment before reopening.

Limits and safety

Use petrol equipment only in suitable open-air conditions under its instructions, never in underground garages, indoors or semi-enclosed exhaust-accumulation areas. Trial first, protect joints, openings and electrics and avoid people and sensitive equipment. Collect sediment and wastewater for site-compliant disposal. No coating-removal grade, explosion protection or multi-operator ability is inferred.

Questions for this task

Prepare site information

Share material, soil, area, access photos, work hours and the actual tool list to discuss J-3522H configuration.

Provide site details for selection advice

FAQ

What task does this scene cover?

Open outdoor paving and building perimeters collect sediment, tracked marks and ordinary removable dirt. Simply pushing sediment into the next section creates repeat work and interrupts access. Establish material and joint compatibility, water supply and wastewater collection first.

Why consider J-3522H?

J-3522H uses petrol-powered pressure washing for suitable open-air work under its instructions. A compatible single-lance nozzle can loosen and move ordinary sediment section by section. Trial nozzle, distance and working setting against the material; this does not establish parallel outlets or specialist attachments.

How should cleaning and surface protection be balanced?

Use petrol equipment only in suitable open-air conditions under its instructions, never in underground garages, indoors or semi-enclosed exhaust-accumulation areas. Trial first, protect joints, openings and electrics and avoid people and sensitive equipment. Collect sediment and wastewater for site-compliant disposal. No coating-removal grade, explosion protection or multi-operator ability is inferred.

Are fixed productivity or cost savings guaranteed?

Trial against site conditions, compatible tools and routes before costing. Reducing repeat work is a reasonable aim, not a fixed percentage or damage-free guarantee.

What site information is needed for selection?

Share material, soil, area, access photos, work hours and the actual tool list to discuss J-3522H configuration.

Select equipment for the actual site

Share material, soil, area, access photos, work hours and the actual tool list to discuss J-3522H configuration.

J-3522H · Selection enquiryCompare application plans
Typical application · Equipment selection

Optional flushing bars: verify ratings rather than promising output by nozzle count

J-2815H

With compatible accessories and sufficient supply and disposal, coordinate flushing routes with collection to reduce blind tool changes and unnecessary passes. Assess equipment and labour costs against the actual scope.

J-2815H optional multi-nozzle flushing illustration
J-2815H · Typical application

01 · What makes this task difficult?

These original images show multi-outlet bars for compatible hard floors and loose residues. Assess coverage, transport and water handling rather than confusing multiple outlets with simultaneous operators.

Loose sediment needs organised collection

Trial toward collection before defining routes and coverage

Accessory and machine ratings may differ

Verify the configuration and supply instead of guessing from nozzle count

02 · Why consider this Jinjie machine?

A multi-nozzle flushing bar is an optional method for suitable hard-surface sediment only after rated pressure, flow, connections and machine compatibility are confirmed. It is not standard on every model and nozzle count does not establish output.

A confirmed compatible optional flushing tool

Trial toward collection before defining routes and coverage

Reduce repeated scattering and unnecessary travel

Rated pressure, flow and connection compatibility

Verify the configuration and supply instead of guessing from nozzle count

Reduce rework from incompatible tools

J-2815H · The current page lists 15 L/min, GX390 petrol power and an AR pump. Maximum/working pressure remains unresolved; do not infer it from the model. Verify a flushing bar by project.

03 · A better cleaning workflow and customer value

With compatible accessories and sufficient supply and disposal, coordinate flushing routes with collection to reduce blind tool changes and unnecessary passes. Assess equipment and labour costs against the actual scope.

Reduce repeated scattering and unnecessary travel

Loose sediment needs organised collection · Trial toward collection before defining routes and coverage

Reduce rework from incompatible tools

Accessory and machine ratings may differ · Verify the configuration and supply instead of guessing from nozzle count

Match tools, the material and the working route before comparing labour, time, consumables and maintenance costs. The potential value depends on suitable conditions and correct operation; no fixed saving or damage-free result is promised.

Working conditions and safety

Exclude petrol units from underground, indoor and exhaust-trapping semi-enclosed locations. Verify actual electrical supply, water protection and permission; 380 V is not explosion protection. Do not operate until surface, nozzle and accessory compatibility are verified. Provide suitable waste recovery/disposal; original images do not prove customer delivery.

Compare related applications and models (4)

Compare each model’s actual drive, access, accessories and configuration on its own product page. Shared task guidance does not make the models interchangeable.

Working method, evidence and original professional analysis

Task-specific equipment selection

Optional flushing bars: verify ratings rather than promising output by nozzle count

Site, material and contamination

These original images show multi-outlet bars for compatible hard floors and loose residues. Assess coverage, transport and water handling rather than confusing multiple outlets with simultaneous operators.

Equipment basis and model differences

Bars for J-2815H, J-1730D, J-1730HS and J-2050H are model/order-specific options, not standard equipment because they appear in an illustration. Obtain compatibility data for nozzle count/bore, total flow, rated pressure, connections and hose. Without it, select no attachment and promise no parallel work or time saving. The pictured bar establishes the illustrated method, not the delivered accessory model, working pressure or area output. J-1730HS's 304 statement covers its reel, not the bar or frame.

Model configuration and selection

Check model-specific configurations against the machine and order before purchase.

ModelCurrent basis and limits
J-2815HThe current page lists 15 L/min, GX390 petrol power and an AR pump. Maximum/working pressure remains unresolved; do not infer it from the model. Verify a flushing bar by project.
J-1730DCurrent information lists 170bar(17MPa), 30 L/min and 380 V electric power. A long single lance is standard; flushing bars and rotary heads are optional, not evidence of simultaneous multi-gun capability.
J-1730HSModel information lists maximum 170bar(17MPa), 30 L/min, GX390 petrol engine, AR pump and a 304 stainless-steel reel. Frame material is separate; a flushing bar is optional.
J-2050HCurrent information lists 200bar(20MPa), 50 L/min and petrol power. Do not borrow HS materials or another model's pipe-size range. A flushing bar is project-specific optional equipment.
Site problemEquipment / conditionsSuggested methodPotential value
Loose sediment needs organised collectionA confirmed compatible optional flushing toolTrial toward collection before defining routes and coverageReduce repeated scattering and unnecessary travel
Accessory and machine ratings may differRated pressure, flow and connection compatibilityVerify the configuration and supply instead of guessing from nozzle countReduce rework from incompatible tools

Working method, accessories and site supply

  1. Verify the assembly · Have the supplier confirm ratings, nozzles and connections against actual working conditions. Until confirmed, discuss only; do not operate.
  2. Check surface and disposal · Assess water-compatible material, joints, soil and waste recovery; segregate people and vehicles.
  3. Trained trial · Trial only the confirmed assembly under its instructions, observing reaction, residues and collection; stop for abnormalities.
  4. Stop and maintain · Stop and release pressure before disassembly, nozzle changes or blockage removal.

Limits and safety

Exclude petrol units from underground, indoor and exhaust-trapping semi-enclosed locations. Verify actual electrical supply, water protection and permission; 380 V is not explosion protection. Do not operate until surface, nozzle and accessory compatibility are verified. Provide suitable waste recovery/disposal; original images do not prove customer delivery.

Questions for this task

Prepare site information

Provide surface/joint and soil photos, area, access times, supply/recovery route, actual power and configuration list.

Provide site details for selection advice

FAQ

Can output be calculated from the number of pictured nozzles?

No. Flow, nozzle, surface, soil and route affect results.

Is a multi-outlet bar the same as multiple operators with guns?

No. These are different assemblies requiring separate flow-division, accessory and safety verification.

What site information is needed for selection?

Provide surface/joint and soil photos, area, access times, supply/recovery route, actual power and configuration list.

Select equipment for the actual site

Provide surface/joint and soil photos, area, access times, supply/recovery route, actual power and configuration list.

J-2815H · Selection enquiryCompare application plans
Typical application · Equipment selection

Drain edges and open service entrances: surface rinsing is not pipe jetting

J-1020D

Collect loose sediment before local rinsing and recovery to reduce repeated work caused by pushing waste back into openings. Protect compatible materials, electrics and adjacent areas for an orderly handover.

J-1020D Single-lance local washing
J-1020D · Typical application

01 · What makes this task difficult?

Two original J-1020D images show lance work on floors and channel edges. The task is compatible service-area hard flooring, loose mud and residues, with collection to avoid merely pushing waste into a blocked opening. Visible water does not prove pipe clearance.

Sediment remains around openings and floor edges

Collect debris, trial the surface and inspect drainage

Service entrances adjoin electrics and people

Protect sockets and gaps, then plan collection and handover

02 · Why consider this Jinjie machine?

Assess J-1020D’s current electric lance configuration for local surface rinsing at service entrances and channel edges, coordinating spray direction, electrical protection and collection. Surface rinsing is not internal pipe jetting.

Compatible local lance cleaning

Collect debris, trial the surface and inspect drainage

Reduce repeat cleanup from pushing waste back into openings

Local work with protection and separation

Protect sockets and gaps, then plan collection and handover

Reduce avoidable disruption and rework

J-1020D · Current information lists 100bar(10MPa), 20 L/min, a 30 m hose and electric operation. Hose length is not guaranteed jetting reach; confirm the actual electrical supply on the nameplate.

03 · A better cleaning workflow and customer value

Collect loose sediment before local rinsing and recovery to reduce repeated work caused by pushing waste back into openings. Protect compatible materials, electrics and adjacent areas for an orderly handover.

Reduce repeat cleanup from pushing waste back into openings

Sediment remains around openings and floor edges · Collect debris, trial the surface and inspect drainage

Reduce avoidable disruption and rework

Service entrances adjoin electrics and people · Protect sockets and gaps, then plan collection and handover

Match tools, the material and the working route before comparing labour, time, consumables and maintenance costs. The potential value depends on suitable conditions and correct operation; no fixed saving or damage-free result is promised.

Working conditions and safety

Exclude petrol units from underground, indoor and exhaust-trapping semi-enclosed locations. Verify actual electrical supply, water protection and permission; 380 V is not explosion protection. Do not operate until surface, nozzle and accessory compatibility are verified. Provide suitable waste recovery/disposal; original images do not prove customer delivery.

Compare related applications and models (2)

Compare each model’s actual drive, access, accessories and configuration on its own product page. Shared task guidance does not make the models interchangeable.

Working method, evidence and original professional analysis

Task-specific equipment selection

Drain edges and open service entrances: surface rinsing is not pipe jetting

Site, material and contamination

Two original J-1020D images show lance work on floors and channel edges. The task is compatible service-area hard flooring, loose mud and residues, with collection to avoid merely pushing waste into a blocked opening. Visible water does not prove pipe clearance.

Equipment basis and model differences

The current 100bar(10MPa), 20 L/min electric positioning supports local-task assessment; verify nameplate supply rather than borrowing another model's voltage. Specialist surface tools are project-specific options. The images show a lance, not hose-fed jetting or large-area scrubbing. Even open service entrances require checks of electrics, supply, drainage and people. Indoor or sensitive sites need separate assessment.

Model configuration and selection

Check model-specific configurations against the machine and order before purchase.

ModelCurrent basis and limits
J-1020DCurrent information lists 100bar(10MPa), 20 L/min, a 30 m hose and electric operation. Hose length is not guaranteed jetting reach; confirm the actual electrical supply on the nameplate.
Site problemEquipment / conditionsSuggested methodPotential value
Sediment remains around openings and floor edgesCompatible local lance cleaningCollect debris, trial the surface and inspect drainageReduce repeat cleanup from pushing waste back into openings
Service entrances adjoin electrics and peopleLocal work with protection and separationProtect sockets and gaps, then plan collection and handoverReduce avoidable disruption and rework

Working method, accessories and site supply

  1. Identify · Assess blockage, waste and material first; remove larger items and collectable sediment.
  2. Protect and separate · Plan electrical/water separation, access controls and recovery. Spray no sockets, cabinets or door gaps.
  3. Trial locally · Trial under the manual on a representative surface and recover residues; stop for backflow or abnormal drainage.
  4. Inspect · Check opening and floor without treating a clean surface as acceptance of pipe structure or drainage capacity.

Limits and safety

Exclude petrol units from underground, indoor and exhaust-trapping semi-enclosed locations. Verify actual electrical supply, water protection and permission; 380 V is not explosion protection. Do not operate until surface, nozzle and accessory compatibility are verified. Provide suitable waste recovery/disposal; original images do not prove customer delivery.

Questions for this task

Prepare site information

Provide surface/joint and soil photos, area, access times, supply/recovery route, actual power and configuration list.

Provide site details for selection advice

FAQ

Does rinsing an opening mean the pipe is cleared?

No. Surface rinsing and internal maintenance are different tasks; check actual drainage.

Can sludge simply be washed into a storm drain?

Do not assume permission; verify collection and site disposal requirements.

What site information is needed for selection?

Provide surface/joint and soil photos, area, access times, supply/recovery route, actual power and configuration list.

Select equipment for the actual site

Provide surface/joint and soil photos, area, access times, supply/recovery route, actual power and configuration list.

J-1020D · Selection enquiryCompare application plans

Questions before selecting equipment

Should lightly soiled property floors use the highest pressure?

Do not choose by a maximum. Assess material, soil, working specification and a trial, comparing more suitable equipment where needed.

What determines petrol versus electric selection?

Assess outdoor/exhaust conditions, actual power, mobility and water handling rather than appearance.

Prepare the site details

Provide surface/joint and soil photos, area, access times, supply/recovery route, actual power and configuration list.

Rental is subject to actual availability and project assessment; no model, stock or price is promised.

Related models, plans and knowledge